initial commit

This commit is contained in:
Jannik Beyerstedt 2020-03-19 11:01:29 +01:00
commit f3b6c9c4ac
9 changed files with 374 additions and 0 deletions

View file

@ -0,0 +1,25 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:03
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #000000
filament_cost = 22
filament_density = 1.24
filament_diameter = 2.9
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 0
first_layer_temperature = 205
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 20
start_filament_gcode = "; Filament gcode\n"
temperature = 203

25
filament/-blue-bedOff.ini Normal file
View file

@ -0,0 +1,25 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:06
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #0080FF
filament_cost = 22
filament_density = 1.24
filament_diameter = 3
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 0
first_layer_temperature = 195
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 20
start_filament_gcode = "; Filament gcode\n"
temperature = 195

25
filament/preset-bedOn.ini Normal file
View file

@ -0,0 +1,25 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:09
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 0
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #FFFFFF
filament_cost = 0
filament_density = 0
filament_diameter = 3
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 65
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
start_filament_gcode = "; Filament gcode\n"
temperature = 190

99
print/prusa-default.ini Normal file
View file

@ -0,0 +1,99 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:52:15
adaptive_slicing = 1
adaptive_slicing_quality = 75%
avoid_crossing_perimeters = 0
bottom_infill_pattern = rectilinear
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 0
brim_connections_width = 0
brim_width = 0
compatible_printers =
complete_objects = 1
default_acceleration = 0
dont_support_bridges = 1
external_perimeter_extrusion_width = 0
external_perimeter_speed = 75%
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 18
extruder_clearance_radius = 15
extrusion_width = 0
fill_angle = 45
fill_density = 30%
fill_gaps = 1
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 150%
first_layer_height = 0.3
first_layer_speed = 75%
gap_fill_speed = 0
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 150%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 0
interface_shells = 0
interior_brim_width = 0
layer_height = 0.2
match_horizontal_surfaces = 0
max_print_speed = 70
max_volumetric_speed = 16
min_skirt_length = 3
notes = 16 mm3/s and 70 mm/s is too much\n- lowered max speed from 70 to 60, volumetric from 16 to 14 + faster top solid from 50% to 75%\n- first layer is now very slow -> increase first layer speed from 50% to 75%\n- back to start, 16mm3/s, 70mm/s max; first layer 75%, top solid 75% -> ok with RDDRONE Top Case
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 35
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
regions_overlap = 0
resolution = 0
seam_position = aligned
shortcuts = complete_objects;fill_density;fill_pattern;adaptive_slicing_quality;layer_height;seam_position;spiral_vase;adaptive_slicing;dont_support_bridges;support_material;raft_layers;support_material_buildplate_only
skirt_distance = 5
skirt_height = 1
skirts = 1
small_perimeter_speed = 35%
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 125%
solid_infill_speed = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_extrusion_width = 0
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_max_layers = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 0
support_material_threshold = 60%
thin_walls = 1
top_infill_extrusion_width = 0
top_infill_pattern = rectilinear
top_solid_infill_speed = 75%
top_solid_layers = 3
travel_speed = 100
xy_size_compensation = 0

View file

@ -0,0 +1,41 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:22
bed_shape = 5x0,195x0,195x190,5x190
before_layer_gcode =
between_objects_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode = G4 P500; wait 500ms, trigger octolapse
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.4
octoprint_apikey =
pressure_advance = 0
print_host = octoprusa.fra80
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port =
serial_speed = 250000
start_gcode = G92 O ; pseudo gcode for octolapse homing\nG1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0

View file

@ -0,0 +1,41 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:25
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
between_objects_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode =
max_layer_height = 0.3
min_layer_height = 0.15
nozzle_diameter = 0.4
octoprint_apikey =
pressure_advance = 0
print_host = octoprusa.iot-fra80
printer_notes =
printer_settings_id =
retract_before_travel = 1
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0.05
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port =
serial_speed = 250000
start_gcode = G1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0

View file

@ -0,0 +1,41 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:29
bed_shape = 5x0,195x0,195x190,5x190
before_layer_gcode = ;Special layer change for octoprint\n;G92 E0; retract\n;G1 E-1; retract filament\nG1 X30 Y5 F5500\nG4 S0\nG4 P500\n;G1 E0; un-retract filament\n;[layer_z]
between_objects_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode =
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.4
octoprint_apikey =
pressure_advance = 0
print_host = octoprusa.iot-fra80
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port =
serial_speed = 250000
start_gcode = G92 O ; pseudo gcode for octolapse homing\nG1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0

41
printer/-prusa.ini Normal file
View file

@ -0,0 +1,41 @@
# generated by Slic3r 1.3.0 on 2020-03-19 09:56:32
bed_shape = 5x0,195x0,195x190,5x190
before_layer_gcode =
between_objects_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode =
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.4
octoprint_apikey =
pressure_advance = 0
print_host = octoprusa.iot-fra80
printer_notes =
printer_settings_id =
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port =
serial_speed = 250000
start_gcode = G1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0

36
slic3r.ini Normal file
View file

@ -0,0 +1,36 @@
# generated by Slic3r 1.3.0 on Thu Mar 19 11:00:16 2020
autoalignz = 1
autocenter =
background_processing = 1
color_toolpaths_by = role
invert_zoom = 0
last_output_path = /Users/jannik/Desktop
last_version_check = 1538910032
main_frame_maximized =
main_frame_pos = 263,105
main_frame_size = 1315,802
nudge_val = 1
object_settings_maximized =
object_settings_pos = 230,91
object_settings_size = 1000,700
reload_behavior = 0
reload_hide_dialog = 0
remember_output_path = 1
show_host = 0
tabbed_preset_editors = 1
threads = 4
version = 1.3.0
version_check = 1
[octoprint]
overwrite = 1
start =
[presets]
filament = -black-bedOff
print = prusa-default-test
printer = -prusa-octolapse
[recent]
config_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3
skein_directory = /Users/jannik/Downloads