[WIP] lower perimeter speed, fix output filename
This commit is contained in:
parent
1be7434666
commit
731fe85405
|
@ -1,4 +1,4 @@
|
|||
# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:35:27 UTC
|
||||
# generated by PrusaSlicer 2.2.0+ on 2020-07-10 at 13:05:52 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 2
|
||||
|
@ -51,12 +51,12 @@ min_skirt_length = 3
|
|||
notes = 16 mm3/s and 70 mm/s is fine!
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[max_print_speed].gcode
|
||||
output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[perimeter_speed].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0
|
||||
perimeter_speed = 65
|
||||
perimeter_speed = 60
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
|
|
|
@ -1,4 +1,4 @@
|
|||
# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:22:01 UTC
|
||||
# generated by PrusaSlicer 2.2.0+ on 2020-07-08 at 14:16:14 UTC
|
||||
avoid_crossing_perimeters = 0
|
||||
bottom_fill_pattern = rectilinear
|
||||
bottom_solid_layers = 2
|
||||
|
@ -51,12 +51,12 @@ min_skirt_length = 3
|
|||
notes = 16 mm3/s and 70 mm/s is fine!
|
||||
only_retract_when_crossing_perimeters = 1
|
||||
ooze_prevention = 0
|
||||
output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[max_print_speed].gcode
|
||||
output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[perimeter_speed].gcode
|
||||
overhangs = 1
|
||||
perimeter_acceleration = 0
|
||||
perimeter_extruder = 1
|
||||
perimeter_extrusion_width = 0
|
||||
perimeter_speed = 65
|
||||
perimeter_speed = 60
|
||||
perimeters = 2
|
||||
post_process =
|
||||
print_settings_id =
|
||||
|
|
Loading…
Reference in a new issue