diff --git a/print/prusa_i3_JB-h02.ini b/print/prusa_i3_JB-h02.ini
index 2ca833e..b15dfbb 100644
--- a/print/prusa_i3_JB-h02.ini
+++ b/print/prusa_i3_JB-h02.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:35:27 UTC
+# generated by PrusaSlicer 2.2.0+ on 2020-07-10 at 13:05:52 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -51,12 +51,12 @@ min_skirt_length = 3
 notes = 16 mm3/s and 70 mm/s is fine!
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[max_print_speed].gcode
+output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[perimeter_speed].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 65
+perimeter_speed = 60
 perimeters = 2
 post_process = 
 print_settings_id = 
diff --git a/print/prusa_i3_JB-h03.ini b/print/prusa_i3_JB-h03.ini
index 5d23aee..a0f7ae7 100644
--- a/print/prusa_i3_JB-h03.ini
+++ b/print/prusa_i3_JB-h03.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:22:01 UTC
+# generated by PrusaSlicer 2.2.0+ on 2020-07-08 at 14:16:14 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -51,12 +51,12 @@ min_skirt_length = 3
 notes = 16 mm3/s and 70 mm/s is fine!
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[max_print_speed].gcode
+output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[perimeter_speed].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 65
+perimeter_speed = 60
 perimeters = 2
 post_process = 
 print_settings_id =