[WIP] add red filament

This commit is contained in:
Jannik Beyerstedt 2020-03-24 11:01:31 +01:00
parent c06b54d882
commit 311bd77694
4 changed files with 62 additions and 8 deletions

View file

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 17:32:16 UTC
# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 10:00:58 UTC
autocenter = 0
background_processing = 0
custom_toolbar_size = 100
@ -16,12 +16,12 @@ version = 2.1.1+
version_check = 1
version_online = 2.1.1
version_online_seen = 2.1.1
view_mode = expert
view_mode = advanced
window_mainframe = 0; 23; 1440; 838; 1
[presets]
filament = DasFilament-PLA-black-3.00
print = prusa_i3_JB-h02
filament = DasFilament-PLA-red-3.00
print = prusa_i3_JB-h03
printer = prusa_i3_JB
sla_material =
sla_print =

View file

@ -0,0 +1,54 @@
# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 08:30:00 UTC
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
compatible_prints =
compatible_prints_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #FB0207
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 22
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 2.85
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 0
filament_minimal_purge_on_wipe_tower = 15
filament_notes = ""
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = nil
filament_retract_before_wipe = nil
filament_retract_layer_change = nil
filament_retract_length = nil
filament_retract_lift = nil
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = nil
filament_settings_id = ""
filament_soluble = 0
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_wipe = nil
first_layer_bed_temperature = 0
first_layer_temperature = 205
inherits =
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
start_filament_gcode = "; Filament gcode\n"
temperature = 200

View file

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 09:24:15 UTC
# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 10:00:42 UTC
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 2
@ -14,7 +14,7 @@ complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 0
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0
external_perimeter_speed = 75%
external_perimeters_first = 0

View file

@ -1,4 +1,4 @@
# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 09:24:09 UTC
# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 10:00:36 UTC
avoid_crossing_perimeters = 0
bottom_fill_pattern = rectilinear
bottom_solid_layers = 2
@ -14,7 +14,7 @@ complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 0
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0
external_perimeter_speed = 75%
external_perimeters_first = 0