diff --git a/PrusaSlicer.ini b/PrusaSlicer.ini
index 1718c43..a6ca3e8 100644
--- a/PrusaSlicer.ini
+++ b/PrusaSlicer.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 17:32:16 UTC
+# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 10:00:58 UTC
 autocenter = 0
 background_processing = 0
 custom_toolbar_size = 100
@@ -16,12 +16,12 @@ version = 2.1.1+
 version_check = 1
 version_online = 2.1.1
 version_online_seen = 2.1.1
-view_mode = expert
+view_mode = advanced
 window_mainframe = 0; 23; 1440; 838; 1
 
 [presets]
-filament = DasFilament-PLA-black-3.00
-print = prusa_i3_JB-h02
+filament = DasFilament-PLA-red-3.00
+print = prusa_i3_JB-h03
 printer = prusa_i3_JB
 sla_material = 
 sla_print = 
diff --git a/filament/DasFilament-PLA-red-3.00.ini b/filament/DasFilament-PLA-red-3.00.ini
new file mode 100644
index 0000000..cde565a
--- /dev/null
+++ b/filament/DasFilament-PLA-red-3.00.ini
@@ -0,0 +1,54 @@
+# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 08:30:00 UTC
+bed_temperature = 0
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 30
+filament_colour = #FB0207
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 22
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 2.85
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 0
+first_layer_temperature = 205
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 30
+min_print_speed = 10
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\n"
+temperature = 200
diff --git a/print/prusa_i3_JB-h02.ini b/print/prusa_i3_JB-h02.ini
index f136505..f9da65d 100644
--- a/print/prusa_i3_JB-h02.ini
+++ b/print/prusa_i3_JB-h02.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 09:24:15 UTC
+# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 10:00:42 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -14,7 +14,7 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 0
+ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 75%
 external_perimeters_first = 0
diff --git a/print/prusa_i3_JB-h03.ini b/print/prusa_i3_JB-h03.ini
index 133b0ca..cf35732 100644
--- a/print/prusa_i3_JB-h03.ini
+++ b/print/prusa_i3_JB-h03.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 09:24:09 UTC
+# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 10:00:36 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -14,7 +14,7 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 0
+ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 75%
 external_perimeters_first = 0