73 lines
1.6 KiB
Markdown
73 lines
1.6 KiB
Markdown
# reprap-prusa-i3-documents
|
||
by Jannik Beyerstedt from Hamburg, Germany
|
||
[jannikbeyerstedt.de](http://jannikbeyerstedt.de) | [Github](https://github.com/jbeyerstedt)
|
||
|
||
## my "private" settings
|
||
These are the settings and tests I use for my reprap prusa i3 build.
|
||
|
||
## configuration
|
||
|
||
- prusa i3 sheet model
|
||
- wodden sheets, watercut. reenfoced at the top by some piece of wood
|
||
- simple selfmade wooden filament spool holder at the top
|
||
- all metric standards
|
||
- T2.5 belts
|
||
- electronics
|
||
- RAMPS 1.4
|
||
- mkII headbed
|
||
- NEMA17 stepper motors
|
||
- 200W 12V power supply by meanwell
|
||
- extruder/ hotend
|
||
- 3mm filament
|
||
- J-Head
|
||
- Greg´s Wade Extruder (currently installing a new generation)
|
||
- currently installing a new layer fan
|
||
|
||
|
||
## location of settings files
|
||
|
||
#### OS X:
|
||
- Slic3r: ~/Library/Application Support/Slic3r
|
||
- printrun: ~/.pronsolerc
|
||
|
||
##### Windows:
|
||
- Slic3r:
|
||
- printrun:
|
||
|
||
|
||
----
|
||
|
||
## checklists
|
||
first idea - to be further enhanced
|
||
|
||
### turning the printer on
|
||
- check the repository for new (slic3r) settings
|
||
- connect USB
|
||
- open pronterface
|
||
- click "connect" in printrun
|
||
- connect mains power
|
||
- click "setPP" to give initial position
|
||
- check fan position
|
||
- if not stored in parking position:
|
||
- home X-axis
|
||
- home Y-axis
|
||
- set zero point of Z-axis
|
||
- check endstops
|
||
- check belt tension
|
||
|
||
### pre print check
|
||
- turn on heat to 190°C
|
||
- clean hotend nozzle
|
||
- click "goStartPos"
|
||
- extrude some filament until steady stream
|
||
- clean hotend nozzle
|
||
- start print
|
||
|
||
### turning the printer off
|
||
- turn heat off
|
||
- click "goParkPos" to move to storing position
|
||
- click "Motors off"
|
||
- click "disconnect" in printrun
|
||
- disconnect mains power
|
||
- disconnect USB
|