1
0
Fork 0

slic3r: tidy up settings

This commit is contained in:
Jannik Beyerstedt 2015-09-23 08:49:30 +02:00
parent f02ca950e7
commit f621682c83
4 changed files with 3 additions and 105 deletions

View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.2.9 on Mon Sep 14 11:29:08 2015 # generated by Slic3r 1.2.9 on Wed Sep 23 08:47:52 2015
bed_temperature = 0 bed_temperature = 0
bridge_fan_speed = 100 bridge_fan_speed = 100
cooling = 1 cooling = 1

View file

@ -1,17 +0,0 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 14:18:26 2015
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 30
filament_colour = #0080FF
filament_diameter = 3
first_layer_bed_temperature = 0
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
temperature = 190

View file

@ -1,4 +1,4 @@
# generated by Slic3r 1.2.6 on Wed May 20 21:08:43 2015 # generated by Slic3r 1.2.9 on Wed Sep 23 08:47:35 2015
bed_temperature = 60 bed_temperature = 60
bridge_fan_speed = 100 bridge_fan_speed = 100
cooling = 1 cooling = 1
@ -6,6 +6,7 @@ disable_fan_first_layers = 0
extrusion_multiplier = 1 extrusion_multiplier = 1
fan_always_on = 0 fan_always_on = 0
fan_below_layer_time = 30 fan_below_layer_time = 30
filament_colour = #FFFFFF
filament_diameter = 3 filament_diameter = 3
first_layer_bed_temperature = 65 first_layer_bed_temperature = 65
first_layer_temperature = 190 first_layer_temperature = 190

View file

@ -1,86 +0,0 @@
# generated by Slic3r 1.2.9 on Mon Sep 14 16:05:10 2015
avoid_crossing_perimeters = 0
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 0
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 18
extruder_clearance_radius = 15
extrusion_width = 0
fill_angle = 45
fill_density = 30%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.4
first_layer_speed = 75%
gap_fill_speed = 0
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 150%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 0
interface_shells = 0
layer_height = 0.4
max_print_speed = 70
max_volumetric_speed = 0
min_skirt_length = 2
notes = NOCH NICHT ANGEPASST!
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 50
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 5
skirt_height = 1
skirts = 1
small_perimeter_speed = 0
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 150%
solid_infill_speed = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 0
support_material_threshold = 0
thin_walls = 1
threads = 4
top_infill_extrusion_width = 80%
top_solid_infill_speed = 0
top_solid_layers = 3
travel_speed = 50
xy_size_compensation = 0