diff --git a/Slic3r-Settings/filament/-prusa-noBed.ini b/Slic3r-Settings/filament/-blue-bedOff.ini
similarity index 86%
rename from Slic3r-Settings/filament/-prusa-noBed.ini
rename to Slic3r-Settings/filament/-blue-bedOff.ini
index f9fb271..c8dcfed 100644
--- a/Slic3r-Settings/filament/-prusa-noBed.ini
+++ b/Slic3r-Settings/filament/-blue-bedOff.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Mon Sep 14 11:29:08 2015
+# generated by Slic3r 1.2.9 on Wed Sep 23 08:47:52 2015
 bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
diff --git a/Slic3r-Settings/filament/JB-190-bed_0-fan_on.ini b/Slic3r-Settings/filament/JB-190-bed_0-fan_on.ini
deleted file mode 100644
index 12d1468..0000000
--- a/Slic3r-Settings/filament/JB-190-bed_0-fan_on.ini
+++ /dev/null
@@ -1,17 +0,0 @@
-# generated by Slic3r 1.2.9 on Sun Sep 13 14:18:26 2015
-bed_temperature = 0
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 30
-filament_colour = #0080FF
-filament_diameter = 3
-first_layer_bed_temperature = 0
-first_layer_temperature = 190
-max_fan_speed = 100
-min_fan_speed = 30
-min_print_speed = 10
-slowdown_below_layer_time = 10
-temperature = 190
diff --git a/Slic3r-Settings/filament/JB-190-bed_65_60.ini b/Slic3r-Settings/filament/preset-bedOn.ini
similarity index 80%
rename from Slic3r-Settings/filament/JB-190-bed_65_60.ini
rename to Slic3r-Settings/filament/preset-bedOn.ini
index 8044b2f..c615e7e 100644
--- a/Slic3r-Settings/filament/JB-190-bed_65_60.ini
+++ b/Slic3r-Settings/filament/preset-bedOn.ini
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.6 on Wed May 20 21:08:43 2015
+# generated by Slic3r 1.2.9 on Wed Sep 23 08:47:35 2015
 bed_temperature = 60
 bridge_fan_speed = 100
 cooling = 1
@@ -6,6 +6,7 @@ disable_fan_first_layers = 0
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 30
+filament_colour = #FFFFFF
 filament_diameter = 3
 first_layer_bed_temperature = 65
 first_layer_temperature = 190
diff --git a/Slic3r-Settings/print/-prusa-h04f30.ini b/Slic3r-Settings/print/-prusa-h04f30.ini
deleted file mode 100644
index 7b930f9..0000000
--- a/Slic3r-Settings/print/-prusa-h04f30.ini
+++ /dev/null
@@ -1,86 +0,0 @@
-# generated by Slic3r 1.2.9 on Mon Sep 14 16:05:10 2015
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 2
-bridge_acceleration = 0
-bridge_flow_ratio = 1
-bridge_speed = 0
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 18
-extruder_clearance_radius = 15
-extrusion_width = 0
-fill_angle = 45
-fill_density = 30%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.4
-first_layer_speed = 75%
-gap_fill_speed = 0
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 150%
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0
-infill_speed = 0
-interface_shells = 0
-layer_height = 0.4
-max_print_speed = 70
-max_volumetric_speed = 0
-min_skirt_length = 2
-notes = NOCH NICHT ANGEPASST!
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 50
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = aligned
-skirt_distance = 5
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 0
-solid_infill_below_area = 50
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 150%
-solid_infill_speed = 0
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 0
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 0
-support_material_threshold = 0
-thin_walls = 1
-threads = 4
-top_infill_extrusion_width = 80%
-top_solid_infill_speed = 0
-top_solid_layers = 3
-travel_speed = 50
-xy_size_compensation = 0