tested slic3r settings for 0.3mm layer height

Slic3r-Settings/filament/-prusa-noBed.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Sun Sep 13 20:59:03 2015
+# generated by Slic3r 1.2.9 on Mon Sep 14 11:29:08 2015
 bed_temperature = 0
 bridge_fan_speed = 100
 cooling = 1
@@ -13,5 +13,5 @@ first_layer_temperature = 190
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 10
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 20
 temperature = 190

Slic3r-Settings/print/-prusa-h03f30.ini

@@ -1,9 +1,9 @@
-# generated by Slic3r 1.2.9 on Sun Sep 13 21:35:21 2015
+# generated by Slic3r 1.2.9 on Mon Sep 14 17:02:13 2015
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
 bridge_flow_ratio = 1
-bridge_speed = 0
+bridge_speed = 50
 brim_width = 0
 complete_objects = 0
 default_acceleration = 0
@@ -22,8 +22,8 @@ fill_pattern = rectilinear
 first_layer_acceleration = 0
 first_layer_extrusion_width = 0
 first_layer_height = 0.4
-first_layer_speed = 75%
+first_layer_speed = 65%
-gap_fill_speed = 0
+gap_fill_speed = 10
 gcode_comments = 0
 infill_acceleration = 0
 infill_every_layers = 1
@@ -32,10 +32,10 @@ infill_extrusion_width = 150%
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 0
-infill_speed = 0
+infill_speed = 80
 interface_shells = 0
 layer_height = 0.3
-max_print_speed = 60
+max_print_speed = 70
 max_volumetric_speed = 0
 min_skirt_length = 2
 notes = 
@@ -55,12 +55,12 @@ seam_position = aligned
 skirt_distance = 5
 skirt_height = 1
 skirts = 1
-small_perimeter_speed = 20
+small_perimeter_speed = 15
 solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
-solid_infill_extrusion_width = 150%
+solid_infill_extrusion_width = 125%
-solid_infill_speed = 0
+solid_infill_speed = 60
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -79,8 +79,8 @@ support_material_speed = 0
 support_material_threshold = 0
 thin_walls = 1
 threads = 4
-top_infill_extrusion_width = 80%
+top_infill_extrusion_width = 90%
-top_solid_infill_speed = 75%
+top_solid_infill_speed = 80%
 top_solid_layers = 3
 travel_speed = 50
 xy_size_compensation = 0

Slic3r-Settings/print/-prusa-h04f30.ini

@@ -1,4 +1,4 @@
-# generated by Slic3r 1.2.9 on Sun Sep 13 21:25:36 2015
+# generated by Slic3r 1.2.9 on Mon Sep 14 16:05:10 2015
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 2
 bridge_acceleration = 0
@@ -35,10 +35,10 @@ infill_overlap = 0
 infill_speed = 0
 interface_shells = 0
 layer_height = 0.4
-max_print_speed = 60
+max_print_speed = 70
 max_volumetric_speed = 0
 min_skirt_length = 2
-notes = 
+notes = NOCH NICHT ANGEPASST!
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
 output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
@@ -46,7 +46,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 60
+perimeter_speed = 50
 perimeters = 3
 post_process = 
 raft_layers = 0

Slic3r-Settings/printer/-prusa-powerOff.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r 1.2.9 on Sun Sep 13 21:43:09 2015
+# generated by Slic3r 1.2.9 on Mon Sep 14 11:36:06 2015
 bed_shape = 7x10,187x10,187x190,7x190
 before_layer_gcode = 
-end_gcode = G91     ; relative positioning\nG0 Z20  ; rise Z axis\nG90     ; turn absolute positioning back on\nG1 F3000 X190 Y195\n\nM104 S0 ; turn off temperature\nM84     ; disable motors\nM81     ; Power Supply off
+end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
@@ -17,7 +17,7 @@ retract_lift = 0
 retract_restart_extra = 0.1
 retract_restart_extra_toolchange = 0
 retract_speed = 7
-start_gcode = G1 F2000 X50 Y100 Z5 ; lift nozzle
+start_gcode = G1 F2000 X50 Y100 Z5; start pos
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0

Slic3r-Settings/printer/-prusa.ini

@@ -1,7 +1,7 @@
-# generated by Slic3r 1.2.9 on Sun Sep 13 22:24:18 2015
+# generated by Slic3r 1.2.9 on Mon Sep 14 12:05:49 2015
 bed_shape = 7x10,187x10,187x190,7x190
 before_layer_gcode = 
-end_gcode = G91     ; relative positioning\nG0 Z20  ; rise Z axis\nG90     ; turn absolute positioning back on\nG1 F3000 X190 Y195
+end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S145 ;temp lower
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
@@ -14,10 +14,10 @@ retract_layer_change = 1
 retract_length = 1
 retract_length_toolchange = 10
 retract_lift = 0
-retract_restart_extra = 0.1
+retract_restart_extra = 0.05
 retract_restart_extra_toolchange = 0
 retract_speed = 7
-start_gcode = G1 F2000 X50 Y100 Z5 ; lift nozzle
+start_gcode = G1 F2000 X50 Y100 Z5; start pos
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0