1
0
Fork 0

slic3r settings

This commit is contained in:
Jannik Beyerstedt 2015-09-13 22:27:34 +02:00
parent 5ccd3ac516
commit e99c7ddc7e
8 changed files with 297 additions and 0 deletions

View file

@ -0,0 +1,17 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 20:59:03 2015
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #0080FF
filament_diameter = 3
first_layer_bed_temperature = 0
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
temperature = 190

View file

@ -0,0 +1,17 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 14:18:26 2015
bed_temperature = 0
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 30
filament_colour = #0080FF
filament_diameter = 3
first_layer_bed_temperature = 0
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
temperature = 190

View file

@ -0,0 +1,16 @@
# generated by Slic3r 1.2.6 on Wed May 20 21:08:43 2015
bed_temperature = 60
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 0
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_diameter = 3
first_layer_bed_temperature = 65
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 10
temperature = 190

View file

@ -0,0 +1,86 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 21:35:21 2015
avoid_crossing_perimeters = 0
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 0
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 30%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.4
first_layer_speed = 75%
gap_fill_speed = 0
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 150%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 0
interface_shells = 0
layer_height = 0.3
max_print_speed = 60
max_volumetric_speed = 0
min_skirt_length = 2
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 50
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 5
skirt_height = 1
skirts = 1
small_perimeter_speed = 20
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 150%
solid_infill_speed = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 0
support_material_threshold = 0
thin_walls = 1
threads = 4
top_infill_extrusion_width = 80%
top_solid_infill_speed = 75%
top_solid_layers = 3
travel_speed = 50
xy_size_compensation = 0

View file

@ -0,0 +1,86 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 21:25:36 2015
avoid_crossing_perimeters = 0
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 0
brim_width = 0
complete_objects = 0
default_acceleration = 0
dont_support_bridges = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0
external_perimeter_speed = 50%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0
fill_angle = 45
fill_density = 30%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.4
first_layer_speed = 75%
gap_fill_speed = 0
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 150%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 0
interface_shells = 0
layer_height = 0.4
max_print_speed = 60
max_volumetric_speed = 0
min_skirt_length = 2
notes =
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 60
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
seam_position = aligned
skirt_distance = 5
skirt_height = 1
skirts = 1
small_perimeter_speed = 0
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 150%
solid_infill_speed = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 0
support_material_threshold = 0
thin_walls = 1
threads = 4
top_infill_extrusion_width = 80%
top_solid_infill_speed = 0
top_solid_layers = 3
travel_speed = 50
xy_size_compensation = 0

View file

@ -0,0 +1,27 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 21:43:09 2015
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
end_gcode = G91 ; relative positioning\nG0 Z20 ; rise Z axis\nG90 ; turn absolute positioning back on\nG1 F3000 X190 Y195\n\nM104 S0 ; turn off temperature\nM84 ; disable motors\nM81 ; Power Supply off
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
pressure_advance = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.1
retract_restart_extra_toolchange = 0
retract_speed = 7
start_gcode = G1 F2000 X50 Y100 Z5 ; lift nozzle
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0

View file

@ -0,0 +1,27 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 22:24:18 2015
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
end_gcode = G91 ; relative positioning\nG0 Z20 ; rise Z axis\nG90 ; turn absolute positioning back on\nG1 F3000 X190 Y195
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
pressure_advance = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.1
retract_restart_extra_toolchange = 0
retract_speed = 7
start_gcode = G1 F2000 X50 Y100 Z5 ; lift nozzle
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0

View file

@ -0,0 +1,21 @@
# generated by Slic3r 1.2.9 on Sun Sep 13 22:24:26 2015
autocenter =
background_processing = 1
last_output_path = /Users/jannik/Desktop
last_version_check = 1442169415
main_frame_maximized = 1
main_frame_pos = 0,23
main_frame_size = 1920,1025
mode = expert
remember_output_path = 1
version = 1.2.9
version_check = 1
[presets]
filament = -prusa-noBed.ini
print = -prusa-h03f30.ini
printer = -prusa.ini
[recent]
config_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3
skein_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3/printTests