Schematics: Add missing functionality, add footprints, fix todos

- Add On-Air button
- Lower frequency for the input HPF
- (final) button footprints
- (final) potentiometer values and footprints
This commit is contained in:
Jannik Beyerstedt 2021-05-28 23:04:56 +02:00
parent af20be8f0e
commit 5edee823cb
18 changed files with 5362 additions and 8530 deletions

View File

@ -59,8 +59,8 @@ Help is always appreciated!
- [x] Adjustable headphone mix and output volume
- [ ] ESD protection and galvanic isolation of line inputs and outputs
- [x] VU meter (own PCB)
- [ ] VU meter (integrated in front panel PCB)
- [ ] Mute and On-Air buttons
- [x] VU meter (integrated in front panel PCB)
- [x] Mute and On-Air buttons
@ -120,7 +120,7 @@ But this chip is obsolete and not produced any more, so we designed our own chai
## User Interface
The user interface should enable the interpereters to adjust their microphone gain and headphone mix on their own.
The user interface should enable the interpreters to adjust their microphone gain and headphone mix on their own.
Additionally, a (permanent) on/off switch, as well as a (temporary) mute button should be present.
A possible UI layout might look like this: ![](docs/ui-layout.jpg)
@ -231,9 +231,19 @@ The **mute** button needs to be a momentary SPST (normally open) or SPDT push bu
### Casing
The casing should be a desk console (angled surface), ideally with space at the front to mount the headset ports (XLR and 6.3 mm jack), like:
- [Bopla ATPH 1865-0250](https://www.bopla.de/gehaeusetechnik/product/alu-topline/alu-topline-gehaeuse/atph-1865-0250.html) (front might not have enough space for the connectors)
- [Bopla ATPH 1865-0250](https://www.bopla.de/gehaeusetechnik/product/alu-topline/gehaeuse-18/atph-1865-0250.html) (front might not have enough space for the connectors)
- Design our own casing to laser cut/ 3D print
The electrical design consists of three identical channel strips, a line I/O board and a power supply.
Each channel strip is separated in two boards, one for the top plate with the VU meter and main controls and one for the front panel with the headset jacks and headphone volume knob.
The distance between top plate and PCB is 7 mm (determined by the potentiometers and on-air switch), which should also be suitable for standard 5 mm LEDs.
Connectors and larger components will be mounted on the back side, so enough space behind the PCB is needed.
The top plate should not exceed 2 mm thickness because of the potentiometer knobs, 1 to 1.5 mm would be ideal.
The I/O boards (headphone and line signals) will just have components on the top side and might be steady enough by the XLR and 6.3 mm jack connectors.
The plate thickness should not exceed 2.5 mm.
## Notes
@ -253,9 +263,9 @@ Connectors and Buttons (User Interface)
| Count | Manufacturer + Art. No. | Description | €/ pc.|
|-------|--------------------------|----------------------------------|-------|
| 1 | Neutrik NAC3 MPA-1 | Mains Power Input | 3.33 |
| 1 | Neutrik NCJ 6 FAH | Line Input | 1.27 |
| 1 | Neutrik NC3 MAAH | Line Output | 0.92 |
| 3x1 | Neutrik NCJ 6 FAH | Headset Microphone Input | 1.27 |
| 1 | Neutrik NCJ6FA-H | Line Input | 1.27 |
| 1 | Neutrik NC3MAAH | Line Output | 0.92 |
| 3x1 | Neutrik NC3FAAV2 | Headset Microphone Input | 1.10 |
| 3x1 | Rean NYS 216 G | Headphone Output | 0.93 |
| 3x1 | APEM 1415NC6 | Mute Button (red cap, snap-in) | 3.72 |
| 3x1 | APEM MHPS2273 | On-Air Button | 0.41 |
@ -267,7 +277,7 @@ Connectors and Buttons (User Interface)
| 3x1 | Alps RK09K1110B1R | 50K log Mono Pot. (Headset Vol.) | 0.67 |
| 3x1 | Re'an F311 | Potentiometer Knob | 0.40 |
| 1 | Vishay M64{Y,Z}104 | 100K Trim Pot. | 0.95 |
| | | **SUM** | 54.50 |
| | | **SUM** | 53.99 |
Sub-Components

Binary file not shown.

View File

@ -169,6 +169,29 @@ X Pin_2 2 200 -100 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x03_Female
#
DEF Connector_Conn_01x03_Female J 0 40 Y N 1 F N
F0 "J" 0 200 50 H V C CNN
F1 "Connector_Conn_01x03_Female" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
A 0 -100 20 901 -901 1 1 6 N 0 -80 0 -120
A 0 0 20 901 -901 1 1 6 N 0 20 0 -20
A 0 100 20 901 -901 1 1 6 N 0 120 0 80
P 2 1 1 6 -50 -100 -20 -100 N
P 2 1 1 6 -50 0 -20 0 N
P 2 1 1 6 -50 100 -20 100 N
X Pin_1 1 -200 100 150 R 50 50 1 1 P
X Pin_2 2 -200 0 150 R 50 50 1 1 P
X Pin_3 3 -200 -100 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x03_Male
#
DEF Connector_Conn_01x03_Male J 0 40 Y N 1 F N
@ -511,6 +534,21 @@ X B 2 150 0 100 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Mechanical_MountingHole
#
DEF Mechanical_MountingHole H 0 40 Y Y 1 F N
F0 "H" 0 200 50 H V C CNN
F1 "Mechanical_MountingHole" 0 125 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
MountingHole*
$ENDFPLIST
DRAW
C 0 0 50 0 1 50 N
ENDDRAW
ENDDEF
#
# Switch_SW_DPDT_x2
#
DEF Switch_SW_DPDT_x2 SW 0 0 Y N 2 F N

View File

@ -1 +0,0 @@
(kicad_pcb (version 4) (host kicad "dummy file") )

View File

@ -1,4 +1,4 @@
update=Sunday, 23 May 2021 at 18:29:42
update=Saturday, 29 May 2021 at 00:01:50
last_client=kicad
[general]
version=1

View File

@ -5,10 +5,10 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 1 5
Title "c3lingo interpeter unit"
Date "2021-05-23"
Date "2021-05-28"
Rev "v0.2"
Comp "Jannik Beyerstedt"
Comment1 "Prototyping Modules Rev2"
Comp "Jannik Beyerstedt (jtbx)"
Comment1 "Prototype 1"
Comment2 ""
Comment3 ""
Comment4 ""
@ -54,12 +54,10 @@ F4 "Monitor_OthersB" I L 5000 5100 50
F5 "Monitor_Stage" I L 5000 4750 50
$EndSheet
$Comp
L power:GND #PWR?
L power:GND #PWR0103
U 1 1 60AC8130
P 6000 7200
AR Path="/60AA662F/60AC8130" Ref="#PWR?" Part="1"
AR Path="/60AC8130" Ref="#PWR0101" Part="1"
F 0 "#PWR0101" H 6000 6950 50 0001 C CNN
F 0 "#PWR0103" H 6000 6950 50 0001 C CNN
F 1 "GND" H 6005 7027 50 0000 C CNN
F 2 "" H 6000 7200 50 0001 C CNN
F 3 "" H 6000 7200 50 0001 C CNN
@ -67,12 +65,10 @@ F 3 "" H 6000 7200 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:+15V #PWR?
L power:+15V #PWR0101
U 1 1 60AC8136
P 5500 6800
AR Path="/60AA662F/60AC8136" Ref="#PWR?" Part="1"
AR Path="/60AC8136" Ref="#PWR0102" Part="1"
F 0 "#PWR0102" H 5500 6650 50 0001 C CNN
F 0 "#PWR0101" H 5500 6650 50 0001 C CNN
F 1 "+15V" H 5515 6973 50 0000 C CNN
F 2 "" H 5500 6800 50 0001 C CNN
F 3 "" H 5500 6800 50 0001 C CNN
@ -80,12 +76,10 @@ F 3 "" H 5500 6800 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:-15V #PWR?
L power:-15V #PWR0102
U 1 1 60AC813C
P 5500 7200
AR Path="/60AA662F/60AC813C" Ref="#PWR?" Part="1"
AR Path="/60AC813C" Ref="#PWR0103" Part="1"
F 0 "#PWR0103" H 5500 7300 50 0001 C CNN
F 0 "#PWR0102" H 5500 7300 50 0001 C CNN
F 1 "-15V" H 5515 7373 50 0000 C CNN
F 2 "" H 5500 7200 50 0001 C CNN
F 3 "" H 5500 7200 50 0001 C CNN
@ -93,12 +87,10 @@ F 3 "" H 5500 7200 50 0001 C CNN
-1 0 0 1
$EndComp
$Comp
L power:PWR_FLAG #FLG?
L power:PWR_FLAG #FLG0101
U 1 1 60AC8148
P 5400 7000
AR Path="/60AA662F/60AC8148" Ref="#FLG?" Part="1"
AR Path="/60AC8148" Ref="#FLG0104" Part="1"
F 0 "#FLG0104" H 5400 7075 50 0001 C CNN
F 0 "#FLG0101" H 5400 7075 50 0001 C CNN
F 1 "PWR_FLAG" V 5400 7127 50 0000 L CNN
F 2 "" H 5400 7000 50 0001 C CNN
F 3 "~" H 5400 7000 50 0001 C CNN
@ -106,12 +98,10 @@ F 3 "~" H 5400 7000 50 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L power:PWR_FLAG #FLG?
L power:PWR_FLAG #FLG0103
U 1 1 60AC8154
P 6500 7000
AR Path="/60AA662F/60AC8154" Ref="#FLG?" Part="1"
AR Path="/60AC8154" Ref="#FLG0106" Part="1"
F 0 "#FLG0106" H 6500 7075 50 0001 C CNN
F 0 "#FLG0103" H 6500 7075 50 0001 C CNN
F 1 "PWR_FLAG" H 6500 7173 50 0000 C CNN
F 2 "" H 6500 7000 50 0001 C CNN
F 3 "~" H 6500 7000 50 0001 C CNN
@ -121,10 +111,10 @@ $EndComp
Text Notes 5600 7650 0 50 ~ 0
Make the ERC happy
$Comp
L power:GNDREF #PWR090
L power:GNDREF #PWR0104
U 1 1 632B5377
P 6500 7200
F 0 "#PWR090" H 6500 6950 50 0001 C CNN
F 0 "#PWR0104" H 6500 6950 50 0001 C CNN
F 1 "GNDREF" H 6505 7027 50 0000 C CNN
F 2 "" H 6500 7200 50 0001 C CNN
F 3 "" H 6500 7200 50 0001 C CNN
@ -143,12 +133,10 @@ Wire Wire Line
5500 7000 5500 7200
Connection ~ 5500 7000
$Comp
L power:PWR_FLAG #FLG?
L power:PWR_FLAG #FLG0102
U 1 1 60AC814E
P 6000 7000
AR Path="/60AA662F/60AC814E" Ref="#FLG?" Part="1"
AR Path="/60AC814E" Ref="#FLG0105" Part="1"
F 0 "#FLG0105" H 6000 7075 50 0001 C CNN
F 0 "#FLG0102" H 6000 7075 50 0001 C CNN
F 1 "PWR_FLAG" V 6000 7127 50 0000 L CNN
F 2 "" H 6000 7000 50 0001 C CNN
F 3 "~" H 6000 7000 50 0001 C CNN

View File

@ -149,6 +149,72 @@ X ~ T 200 -100 100 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x02_Male
#
DEF Connector_Conn_01x02_Male J 0 40 Y N 1 F N
F0 "J" 0 100 50 H V C CNN
F1 "Connector_Conn_01x02_Male" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
S 34 -95 0 -105 1 1 6 F
S 34 5 0 -5 1 1 6 F
P 2 1 1 6 50 -100 34 -100 N
P 2 1 1 6 50 0 34 0 N
X Pin_1 1 200 0 150 L 50 50 1 1 P
X Pin_2 2 200 -100 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x03_Female
#
DEF Connector_Conn_01x03_Female J 0 40 Y N 1 F N
F0 "J" 0 200 50 H V C CNN
F1 "Connector_Conn_01x03_Female" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
A 0 -100 20 901 -901 1 1 6 N 0 -80 0 -120
A 0 0 20 901 -901 1 1 6 N 0 20 0 -20
A 0 100 20 901 -901 1 1 6 N 0 120 0 80
P 2 1 1 6 -50 -100 -20 -100 N
P 2 1 1 6 -50 0 -20 0 N
P 2 1 1 6 -50 100 -20 100 N
X Pin_1 1 -200 100 150 R 50 50 1 1 P
X Pin_2 2 -200 0 150 R 50 50 1 1 P
X Pin_3 3 -200 -100 150 R 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x03_Male
#
DEF Connector_Conn_01x03_Male J 0 40 Y N 1 F N
F0 "J" 0 200 50 H V C CNN
F1 "Connector_Conn_01x03_Male" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
S 34 -95 0 -105 1 1 6 F
S 34 5 0 -5 1 1 6 F
S 34 105 0 95 1 1 6 F
P 2 1 1 6 50 -100 34 -100 N
P 2 1 1 6 50 0 34 0 N
P 2 1 1 6 50 100 34 100 N
X Pin_1 1 200 100 150 L 50 50 1 1 P
X Pin_2 2 200 0 150 L 50 50 1 1 P
X Pin_3 3 200 -100 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x04_Male
#
DEF Connector_Conn_01x04_Male J 0 40 Y N 1 F N
@ -405,6 +471,45 @@ X B 2 150 0 100 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Mechanical_MountingHole
#
DEF Mechanical_MountingHole H 0 40 Y Y 1 F N
F0 "H" 0 200 50 H V C CNN
F1 "Mechanical_MountingHole" 0 125 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
MountingHole*
$ENDFPLIST
DRAW
C 0 0 50 0 1 50 N
ENDDRAW
ENDDEF
#
# Switch_SW_DPDT_x2
#
DEF Switch_SW_DPDT_x2 SW 0 0 Y N 2 F N
F0 "SW" 0 170 50 H V C CNN
F1 "Switch_SW_DPDT_x2" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
SW*DPDT*
$ENDFPLIST
DRAW
C -80 0 20 0 0 0 N
C 80 -100 20 0 0 0 N
C 80 100 20 0 1 0 N
P 2 0 1 0 -60 10 65 90 N
X A 1 200 100 100 L 50 50 1 1 P
X B 2 -200 0 100 R 50 50 1 1 P
X C 3 200 -100 100 L 50 50 1 1 P
X A 4 200 100 100 L 50 50 2 1 P
X B 5 -200 0 100 R 50 50 2 1 P
X C 6 200 -100 100 L 50 50 2 1 P
ENDDRAW
ENDDEF
#
# Switch_SW_Push
#
DEF Switch_SW_Push SW 0 40 N N 1 F N
@ -422,31 +527,6 @@ X 2 2 200 0 100 L 50 50 0 1 P
ENDDRAW
ENDDEF
#
# Switch_SW_SPST_LED
#
DEF Switch_SW_SPST_LED SW 0 40 Y N 1 F N
F0 "SW" 25 225 50 H V L CNN
F1 "Switch_SW_SPST_LED" 0 -125 50 H V C CNN
F2 "" 0 300 50 H I C CNN
F3 "" 0 300 50 H I C CNN
DRAW
C -80 100 20 0 1 0 N
C 80 100 20 0 1 0 N
P 2 0 0 0 -150 -75 -100 -25 N
P 2 0 0 0 -100 -75 -50 -25 N
P 2 0 0 0 -100 0 100 0 N
P 2 0 0 0 -25 50 -25 -50 N
P 3 0 0 0 -150 -50 -150 -75 -125 -75 N
P 3 0 0 0 -100 -50 -100 -75 -75 -75 N
P 4 0 0 0 -25 0 50 50 50 -50 -25 0 F
P 2 0 1 0 -60 110 80 170 N
X 1 1 -200 100 100 R 50 50 0 1 P
X 2 2 200 100 100 L 50 50 0 1 P
X K 3 -200 0 100 R 50 50 0 1 P
X A 4 200 0 100 L 50 50 0 1 P
ENDDRAW
ENDDEF
#
# power_+15V
#
DEF power_+15V #PWR 0 0 Y Y 1 F P

View File

@ -1,7 +1,17 @@
update=Sunday, 13 December 2020 at 21:49:58
update=Saturday, 29 May 2021 at 23:56:52
last_client=kicad
[general]
version=1
[schematic_editor]
version=1
PageLayoutDescrFile=
PlotDirectoryName=../../../
SubpartIdSeparator=0
SubpartFirstId=65
NetFmtName=Pcbnew
SpiceAjustPassiveValues=0
LabSize=50
ERC_TestSimilarLabels=1
[pcbnew]
version=1
PageLayoutDescrFile=
@ -23,6 +33,8 @@ TrackWidth2=0.25
TrackWidth3=1
ViaDiameter1=0.6
ViaDrill1=0.3
ViaDiameter2=0.8
ViaDrill2=0.6
dPairWidth1=0.2
dPairGap1=0.25
dPairViaGap1=0.25
@ -239,13 +251,3 @@ uViaDrill=0.1
dPairWidth=0.2
dPairGap=0.25
dPairViaGap=0.25
[schematic_editor]
version=1
PageLayoutDescrFile=
PlotDirectoryName=../../
SubpartIdSeparator=0
SubpartFirstId=65
NetFmtName=Pcbnew
SpiceAjustPassiveValues=0
LabSize=50
ERC_TestSimilarLabels=1

View File

@ -0,0 +1,3 @@
(fp_lib_table
(lib (name c3lingo_unit-footprints)(type KiCad)(uri ${KIPRJMOD}/../kicad-libraries/c3lingo_unit-footprints.pretty)(options "")(descr ""))
)

View File

@ -36,6 +36,26 @@ X V+ 8 -100 300 150 D 50 50 3 1 W
ENDDRAW
ENDDEF
#
# Connector_Conn_01x02_Male
#
DEF Connector_Conn_01x02_Male J 0 40 Y N 1 F N
F0 "J" 0 100 50 H V C CNN
F1 "Connector_Conn_01x02_Male" 0 -200 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
S 34 -95 0 -105 1 1 6 F
S 34 5 0 -5 1 1 6 F
P 2 1 1 6 50 -100 34 -100 N
P 2 1 1 6 50 0 34 0 N
X Pin_1 1 200 0 150 L 50 50 1 1 P
X Pin_2 2 200 -100 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x03_Male
#
DEF Connector_Conn_01x03_Male J 0 40 Y N 1 F N
@ -59,6 +79,32 @@ X Pin_3 3 200 -100 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_Conn_01x04_Male
#
DEF Connector_Conn_01x04_Male J 0 40 Y N 1 F N
F0 "J" 0 200 50 H V C CNN
F1 "Connector_Conn_01x04_Male" 0 -300 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
Connector*:*_1x??_*
$ENDFPLIST
DRAW
S 34 -195 0 -205 1 1 6 F
S 34 -95 0 -105 1 1 6 F
S 34 5 0 -5 1 1 6 F
S 34 105 0 95 1 1 6 F
P 2 1 1 6 50 -200 34 -200 N
P 2 1 1 6 50 -100 34 -100 N
P 2 1 1 6 50 0 34 0 N
P 2 1 1 6 50 100 34 100 N
X Pin_1 1 200 100 150 L 50 50 1 1 P
X Pin_2 2 200 0 150 L 50 50 1 1 P
X Pin_3 3 200 -100 150 L 50 50 1 1 P
X Pin_4 4 200 -200 150 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Connector_TestPoint
#
DEF Connector_TestPoint TP 0 30 N N 1 F N
@ -223,6 +269,43 @@ X VO+ 8 1600 150 300 L 59 59 1 1 O
ENDDRAW
ENDDEF
#
# Jumper_SolderJumper_2_Open
#
DEF Jumper_SolderJumper_2_Open JP 0 0 Y N 1 F N
F0 "JP" 0 80 50 H V C CNN
F1 "Jumper_SolderJumper_2_Open" 0 -100 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
SolderJumper*Open*
$ENDFPLIST
DRAW
A -10 0 40 901 -901 0 1 0 N -10 40 -10 -40
A -10 0 40 901 -901 0 1 0 F -10 40 -10 -40
A 10 0 40 -899 899 0 1 0 N 10 -40 10 40
A 10 0 40 -899 899 0 1 0 F 10 -40 10 40
P 2 0 1 0 -10 40 -10 -40 N
P 2 0 1 0 10 40 10 -40 N
X A 1 -150 0 100 R 50 50 1 1 P
X B 2 150 0 100 L 50 50 1 1 P
ENDDRAW
ENDDEF
#
# Mechanical_MountingHole
#
DEF Mechanical_MountingHole H 0 40 Y Y 1 F N
F0 "H" 0 200 50 H V C CNN
F1 "Mechanical_MountingHole" 0 125 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
$FPLIST
MountingHole*
$ENDFPLIST
DRAW
C 0 0 50 0 1 50 N
ENDDRAW
ENDDEF
#
# power_+15V
#
DEF power_+15V #PWR 0 0 Y Y 1 F P
@ -264,16 +347,19 @@ X GND 1 0 0 0 D 50 50 1 1 W N
ENDDRAW
ENDDEF
#
# power_PWR_FLAG
# power_GNDREF
#
DEF power_PWR_FLAG #FLG 0 0 N N 1 F P
F0 "#FLG" 0 75 50 H I C CNN
F1 "power_PWR_FLAG" 0 150 50 H V C CNN
DEF power_GNDREF #PWR 0 0 Y Y 1 F P
F0 "#PWR" 0 -250 50 H I C CNN
F1 "power_GNDREF" 0 -150 50 H V C CNN
F2 "" 0 0 50 H I C CNN
F3 "" 0 0 50 H I C CNN
DRAW
P 6 0 1 0 0 0 0 50 -40 75 0 100 40 75 0 50 N
X pwr 1 0 0 0 U 50 50 0 0 w
P 2 0 1 0 -25 -75 25 -75 N
P 2 0 1 0 -5 -100 5 -100 N
P 2 0 1 0 0 -50 0 0 N
P 2 0 1 0 50 -50 -50 -50 N
X GNDREF 1 0 0 0 D 50 50 1 1 W N
ENDDRAW
ENDDEF
#

View File

@ -1,7 +1,17 @@
update=Sunday, 13 December 2020 at 21:49:58
update=Saturday, 29 May 2021 at 00:05:13
last_client=kicad
[general]
version=1
[schematic_editor]
version=1
PageLayoutDescrFile=
PlotDirectoryName=../../../
SubpartIdSeparator=0
SubpartFirstId=65
NetFmtName=Pcbnew
SpiceAjustPassiveValues=0
LabSize=50
ERC_TestSimilarLabels=1
[pcbnew]
version=1
PageLayoutDescrFile=
@ -24,6 +34,8 @@ TrackWidth3=1
ViaDiameter1=0.6
ViaDrill1=0.3
dPairWidth1=0.2
ViaDiameter2=0.8
ViaDrill2=0.6
dPairGap1=0.25
dPairViaGap1=0.25
SilkLineWidth=0.12
@ -239,13 +251,3 @@ uViaDrill=0.1
dPairWidth=0.2
dPairGap=0.25
dPairViaGap=0.25
[schematic_editor]
version=1
PageLayoutDescrFile=
PlotDirectoryName=../../
SubpartIdSeparator=0
SubpartFirstId=65
NetFmtName=Pcbnew
SpiceAjustPassiveValues=0
LabSize=50
ERC_TestSimilarLabels=1

View File

@ -5,35 +5,35 @@ $Descr A4 11693 8268
encoding utf-8
Sheet 2 5
Title "c3lingo interpeter unit -- mix and line I/O"
Date "2021-05-23"
Date "2021-05-28"
Rev "v0.2"
Comp "Jannik Beyerstedt"
Comment1 "Prototyping Modules Rev2"
Comp "Jannik Beyerstedt (jtbx)"
Comment1 "Prototype 1"
Comment2 ""
Comment3 ""
Comment4 ""
$EndDescr
$Comp
L Connector:XLR3_AudioJack3_Combo_Ground J3
L Connector:XLR3_AudioJack3_Combo_Ground J201
U 1 1 5F81B01C
P 2500 1850
F 0 "J3" H 2500 2215 50 0000 C CNN
F 0 "J201" H 2500 2215 50 0000 C CNN
F 1 "Stage Line-In" H 2500 2124 50 0000 C CNN
F 2 "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" H 2500 1850 50 0001 C CNN
F 3 "https://www.neutrik.com/de/produkt/ncj6fa-h.pdf" H 2500 1850 50 0001 C CNN
F 4 "Combo XLR + 6.3 mm Jack" H 2500 1850 50 0001 C CNN "Model"
F 2 "Connector_Audio:Jack_XLR-6.35mm_Neutrik_NCJ6FA-H_Horizontal" H 2500 1850 50 0001 C CNN
F 3 "https://www.neutrik.com/media/8443/download/ncj6fah-2.pdf" H 2500 1850 50 0001 C CNN
F 4 "NCJ6FA-H (Horiz. Combo Jack)" H 2500 1850 50 0001 C CNN "Model"
1 2500 1850
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0104
L power:GND #PWR0207
U 1 1 5F8EECF1
P 2450 2700
F 0 "#PWR0104" H 2450 2450 50 0001 C CNN
F 1 "GND" H 2455 2527 50 0000 C CNN
F 2 "" H 2450 2700 50 0001 C CNN
F 3 "" H 2450 2700 50 0001 C CNN
1 2450 2700
P 2150 2750
F 0 "#PWR0207" H 2150 2500 50 0001 C CNN
F 1 "GND" H 2155 2577 50 0000 C CNN
F 2 "" H 2150 2750 50 0001 C CNN
F 3 "" H 2150 2750 50 0001 C CNN
1 2150 2750
1 0 0 -1
$EndComp
Wire Wire Line
@ -45,10 +45,10 @@ Wire Wire Line
Wire Wire Line
2000 2250 2000 1850
$Comp
L Amplifier_Operational:LM358 U3
L Amplifier_Operational:LM358 U201
U 1 1 5F810C7D
P 4800 2000
F 0 "U3" H 4800 1633 50 0000 C CNN
F 0 "U201" H 4800 1633 50 0000 C CNN
F 1 "LM833N" H 4800 1724 50 0000 C CNN
F 2 "Package_DIP:DIP-8_W7.62mm_Socket_LongPads" H 4800 2000 50 0001 C CNN
F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 4800 2000 50 0001 C CNN
@ -56,10 +56,10 @@ F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 4800 2000 50 0001 C CNN
1 0 0 1
$EndComp
$Comp
L Amplifier_Operational:LM358 U3
L Amplifier_Operational:LM358 U201
U 2 1 5F926E3F
P 7400 2200
F 0 "U3" H 7400 1833 50 0000 C CNN
F 0 "U201" H 7400 1833 50 0000 C CNN
F 1 "LM833N" H 7400 1924 50 0000 C CNN
F 2 "Package_DIP:DIP-8_W7.62mm_Socket_LongPads" H 7400 2200 50 0001 C CNN
F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 7400 2200 50 0001 C CNN
@ -67,10 +67,10 @@ F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 7400 2200 50 0001 C CNN
1 0 0 1
$EndComp
$Comp
L Device:C C10
L Device:C C201
U 1 1 5FA035F7
P 6250 1500
F 0 "C10" V 5998 1500 50 0000 C CNN
F 0 "C201" V 5998 1500 50 0000 C CNN
F 1 "47pF" V 6089 1500 50 0000 C CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 6288 1350 50 0001 C CNN
F 3 "~" H 6250 1500 50 0001 C CNN
@ -78,10 +78,10 @@ F 3 "~" H 6250 1500 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R8
L Device:R R203
U 1 1 5FA03CB6
P 4150 1750
F 0 "R8" V 3943 1750 50 0000 C CNN
F 0 "R203" V 3943 1750 50 0000 C CNN
F 1 "10K" V 4034 1750 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 4080 1750 50 0001 C CNN
F 3 "~" H 4150 1750 50 0001 C CNN
@ -89,10 +89,10 @@ F 3 "~" H 4150 1750 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R17
L Device:R R208
U 1 1 5FA17C1B
P 4150 2250
F 0 "R17" V 4265 2250 50 0000 C CNN
F 0 "R208" V 4265 2250 50 0000 C CNN
F 1 "10K" V 4356 2250 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 4080 2250 50 0001 C CNN
F 3 "~" H 4150 2250 50 0001 C CNN
@ -100,10 +100,10 @@ F 3 "~" H 4150 2250 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R3
L Device:R R201
U 1 1 5FA193EC
P 4850 1450
F 0 "R3" V 4643 1450 50 0000 C CNN
F 0 "R201" V 4643 1450 50 0000 C CNN
F 1 "10K" V 4734 1450 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 4780 1450 50 0001 C CNN
F 3 "~" H 4850 1450 50 0001 C CNN
@ -111,10 +111,10 @@ F 3 "~" H 4850 1450 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R18
L Device:R R209
U 1 1 5FA1F9D1
P 4400 2450
F 0 "R18" H 4470 2496 50 0000 L CNN
F 0 "R209" H 4470 2496 50 0000 L CNN
F 1 "10K" H 4470 2405 50 0000 L CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 4330 2450 50 0001 C CNN
F 3 "~" H 4400 2450 50 0001 C CNN
@ -122,10 +122,10 @@ F 3 "~" H 4400 2450 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0105
L power:GND #PWR0206
U 1 1 5FA228C1
P 4400 2600
F 0 "#PWR0105" H 4400 2350 50 0001 C CNN
F 0 "#PWR0206" H 4400 2350 50 0001 C CNN
F 1 "GND" H 4405 2427 50 0000 C CNN
F 2 "" H 4400 2600 50 0001 C CNN
F 3 "" H 4400 2600 50 0001 C CNN
@ -149,10 +149,10 @@ Wire Wire Line
Wire Wire Line
5200 2000 5100 2000
$Comp
L Device:R R14
L Device:R R206
U 1 1 5FAA4C23
P 5650 2000
F 0 "R14" V 5443 2000 50 0000 C CNN
F 0 "R206" V 5443 2000 50 0000 C CNN
F 1 "47K" V 5534 2000 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 5580 2000 50 0001 C CNN
F 3 "~" H 5650 2000 50 0001 C CNN
@ -160,10 +160,10 @@ F 3 "~" H 5650 2000 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R12
L Device:R R204
U 1 1 5FAC6B3E
P 6250 1900
F 0 "R12" V 6043 1900 50 0000 C CNN
F 0 "R204" V 6043 1900 50 0000 C CNN
F 1 "22K" V 6134 1900 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 6180 1900 50 0001 C CNN
F 3 "~" H 6250 1900 50 0001 C CNN
@ -171,14 +171,14 @@ F 3 "~" H 6250 1900 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R_POT RV1
L Device:R_POT RV201
U 1 1 5FAC97E9
P 6650 1900
F 0 "RV1" V 6535 1900 50 0000 C CNN
F 0 "RV201" V 6535 1900 50 0000 C CNN
F 1 "100K" V 6444 1900 50 0000 C CNN
F 2 "Potentiometer_THT:Potentiometer_Vishay_T73XX_Horizontal" H 6650 1900 50 0001 C CNN
F 3 "https://www.vishay.com/docs/57028/64.pdf" H 6650 1900 50 0001 C CNN
F 4 "Vishay M64{Y,Z}104" H 6650 1900 50 0001 C CNN "Model"
F 4 "Vishay M64Y104" H 6650 1900 50 0001 C CNN "Model"
1 6650 1900
0 -1 -1 0
$EndComp
@ -200,10 +200,10 @@ Wire Wire Line
Wire Wire Line
6400 1900 6500 1900
$Comp
L power:GND #PWR0106
L power:GND #PWR0205
U 1 1 5FAF156D
P 7000 2500
F 0 "#PWR0106" H 7000 2250 50 0001 C CNN
F 0 "#PWR0205" H 7000 2250 50 0001 C CNN
F 1 "GND" H 7005 2327 50 0000 C CNN
F 2 "" H 7000 2500 50 0001 C CNN
F 3 "" H 7000 2500 50 0001 C CNN
@ -238,13 +238,13 @@ Wire Wire Line
Wire Wire Line
2000 1850 1950 1850
$Comp
L Connector:XLR3_AudioJack3_Combo_Ground J3
L Connector:XLR3_AudioJack3_Combo_Ground J201
U 2 1 5F81E1F3
P 1750 1850
F 0 "J3" H 1750 2215 50 0000 C CNN
F 0 "J201" H 1750 2215 50 0000 C CNN
F 1 "Stage Line-In" H 1750 2124 50 0000 C CNN
F 2 "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" H 1750 1850 50 0001 C CNN
F 3 "https://www.neutrik.com/de/produkt/ncj6fa-h.pdf" H 1750 1850 50 0001 C CNN
F 2 "Connector_Audio:Jack_XLR-6.35mm_Neutrik_NCJ6FA-H_Horizontal" H 1750 1850 50 0001 C CNN
F 3 "https://www.neutrik.com/media/8443/download/ncj6fah-2.pdf" H 1750 1850 50 0001 C CNN
F 4 "Combo XLR + 6.3 mm Jack" H 1750 1850 50 0001 C CNN "Model"
2 1750 1850
1 0 0 -1
@ -252,10 +252,10 @@ $EndComp
NoConn ~ 6800 1900
Connection ~ 2500 2250
$Comp
L Connector:TestPoint TP6
L Connector:TestPoint TP201
U 1 1 5FC8BE08
P 8100 2000
F 0 "TP6" H 8100 2325 50 0000 C CNN
F 0 "TP201" H 8100 2325 50 0000 C CNN
F 1 "Stage" H 8100 2234 50 0000 C CNN
F 2 "TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm" H 8300 2000 50 0001 C CNN
F 3 "~" H 8300 2000 50 0001 C CNN
@ -268,10 +268,10 @@ Wire Wire Line
Text Notes 3150 3100 0 50 ~ 10
Balanced Line Input Converter\nGain: 1\n220pF for HF rolloff (20 kHz)
$Comp
L Device:R R4
L Device:R R202
U 1 1 601CC821
P 3650 1750
F 0 "R4" V 3857 1750 50 0000 C CNN
F 0 "R202" V 3857 1750 50 0000 C CNN
F 1 "10K" V 3766 1750 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 3580 1750 50 0001 C CNN
F 3 "~" H 3650 1750 50 0001 C CNN
@ -279,10 +279,10 @@ F 3 "~" H 3650 1750 50 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L Device:C C11
L Device:C C202
U 1 1 601CD9A5
P 3900 2000
F 0 "C11" H 4015 2046 50 0000 L CNN
F 0 "C202" H 4015 2046 50 0000 L CNN
F 1 "220pF" H 4015 1955 50 0000 L CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 3938 1850 50 0001 C CNN
F 3 "~" H 3900 2000 50 0001 C CNN
@ -290,10 +290,10 @@ F 3 "~" H 3900 2000 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Device:R R16
L Device:R R207
U 1 1 601CF7CB
P 3650 2250
F 0 "R16" V 3857 2250 50 0000 C CNN
F 0 "R207" V 3857 2250 50 0000 C CNN
F 1 "10K" V 3766 2250 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 3580 2250 50 0001 C CNN
F 3 "~" H 3650 2250 50 0001 C CNN
@ -301,10 +301,10 @@ F 3 "~" H 3650 2250 50 0001 C CNN
0 -1 -1 0
$EndComp
$Comp
L Device:R R13
L Device:R R205
U 1 1 601D068B
P 3300 2000
F 0 "R13" H 3230 1954 50 0000 R CNN
F 0 "R205" H 3230 1954 50 0000 R CNN
F 1 "3.3K" H 3230 2045 50 0000 R CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 3230 2000 50 0001 C CNN
F 3 "~" H 3300 2000 50 0001 C CNN
@ -379,10 +379,10 @@ Wire Wire Line
Wire Wire Line
4750 4800 4950 4800
$Comp
L Device:R R19
L Device:R R210
U 1 1 5FD14A6B
P 3400 4150
F 0 "R19" V 3193 4150 50 0000 C CNN
F 0 "R210" V 3193 4150 50 0000 C CNN
F 1 "22K" V 3284 4150 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 3330 4150 50 0001 C CNN
F 3 "~" H 3400 4150 50 0001 C CNN
@ -390,10 +390,10 @@ F 3 "~" H 3400 4150 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R21
L Device:R R212
U 1 1 5FD2515A
P 3400 4500
F 0 "R21" V 3193 4500 50 0000 C CNN
F 0 "R212" V 3193 4500 50 0000 C CNN
F 1 "22K" V 3284 4500 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 3330 4500 50 0001 C CNN
F 3 "~" H 3400 4500 50 0001 C CNN
@ -410,10 +410,10 @@ Wire Wire Line
Wire Wire Line
3000 4500 3250 4500
$Comp
L Connector:TestPoint TP10
L Connector:TestPoint TP205
U 1 1 5FC9BB36
P 3000 4850
F 0 "TP10" H 3058 4968 50 0000 L CNN
F 0 "TP205" H 3058 4968 50 0000 L CNN
F 1 "Mic3" H 3058 4877 50 0000 L CNN
F 2 "TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm" H 3200 4850 50 0001 C CNN
F 3 "~" H 3200 4850 50 0001 C CNN
@ -421,10 +421,10 @@ F 3 "~" H 3200 4850 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Connector:TestPoint TP8
L Connector:TestPoint TP203
U 1 1 5FC9B2AB
P 3000 4500
F 0 "TP8" H 3058 4618 50 0000 L CNN
F 0 "TP203" H 3058 4618 50 0000 L CNN
F 1 "Mic2" H 3058 4527 50 0000 L CNN
F 2 "TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm" H 3200 4500 50 0001 C CNN
F 3 "~" H 3200 4500 50 0001 C CNN
@ -435,10 +435,10 @@ Wire Wire Line
3000 4150 3250 4150
Connection ~ 3000 4150
$Comp
L Connector:TestPoint TP7
L Connector:TestPoint TP202
U 1 1 5FC9AA71
P 3000 4150
F 0 "TP7" H 3000 4475 50 0000 C CNN
F 0 "TP202" H 3000 4475 50 0000 C CNN
F 1 "Mic1" H 3000 4384 50 0000 C CNN
F 2 "TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm" H 3200 4150 50 0001 C CNN
F 3 "~" H 3200 4150 50 0001 C CNN
@ -447,10 +447,10 @@ F 3 "~" H 3200 4150 50 0001 C CNN
$EndComp
Connection ~ 5300 4500
$Comp
L Connector:TestPoint TP9
L Connector:TestPoint TP204
U 1 1 5FC8F283
P 5300 4500
F 0 "TP9" H 5300 4825 50 0000 C CNN
F 0 "TP204" H 5300 4825 50 0000 C CNN
F 1 "MicSum" H 5300 4734 50 0000 C CNN
F 2 "TestPoint:TestPoint_THTPad_D2.0mm_Drill1.0mm" H 5500 4500 50 0001 C CNN
F 3 "~" H 5500 4500 50 0001 C CNN
@ -498,10 +498,10 @@ Wire Wire Line
Wire Wire Line
7900 4950 8000 4950
$Comp
L power:GND #PWR0122
L power:GND #PWR0219
U 1 1 6049ECFC
P 8000 5050
F 0 "#PWR0122" H 8000 4800 50 0001 C CNN
F 0 "#PWR0219" H 8000 4800 50 0001 C CNN
F 1 "GND" H 8005 4877 50 0000 C CNN
F 2 "" H 8000 5050 50 0001 C CNN
F 3 "" H 8000 5050 50 0001 C CNN
@ -509,10 +509,10 @@ F 3 "" H 8000 5050 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Device:C C16
L Device:C C206
U 1 1 604659B0
P 5950 4050
F 0 "C16" V 5698 4050 50 0000 C CNN
F 0 "C206" V 5698 4050 50 0000 C CNN
F 1 "1uF" V 5789 4050 50 0000 C CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 5988 3900 50 0001 C CNN
F 3 "~" H 5950 4050 50 0001 C CNN
@ -520,10 +520,10 @@ F 3 "~" H 5950 4050 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:C C27
L Device:C C209
U 1 1 60444365
P 5950 4950
F 0 "C27" V 5698 4950 50 0000 C CNN
F 0 "C209" V 5698 4950 50 0000 C CNN
F 1 "1uF" V 5789 4950 50 0000 C CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 5988 4800 50 0001 C CNN
F 3 "~" H 5950 4950 50 0001 C CNN
@ -531,10 +531,10 @@ F 3 "~" H 5950 4950 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L power:GND #PWR0123
L power:GND #PWR0217
U 1 1 60442CD0
P 5700 5050
F 0 "#PWR0123" H 5700 4800 50 0001 C CNN
F 0 "#PWR0217" H 5700 4800 50 0001 C CNN
F 1 "GND" H 5705 4877 50 0000 C CNN
F 2 "" H 5700 5050 50 0001 C CNN
F 3 "" H 5700 5050 50 0001 C CNN
@ -542,10 +542,10 @@ F 3 "" H 5700 5050 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0124
L power:GND #PWR0210
U 1 1 604420CE
P 5700 4150
F 0 "#PWR0124" H 5700 3900 50 0001 C CNN
F 0 "#PWR0210" H 5700 3900 50 0001 C CNN
F 1 "GND" H 5705 3977 50 0000 C CNN
F 2 "" H 5700 4150 50 0001 C CNN
F 3 "" H 5700 4150 50 0001 C CNN
@ -553,10 +553,10 @@ F 3 "" H 5700 4150 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:+15V #PWR0125
L power:+15V #PWR0209
U 1 1 60441414
P 6200 3950
F 0 "#PWR0125" H 6200 3800 50 0001 C CNN
F 0 "#PWR0209" H 6200 3800 50 0001 C CNN
F 1 "+15V" H 6215 4123 50 0000 C CNN
F 2 "" H 6200 3950 50 0001 C CNN
F 3 "" H 6200 3950 50 0001 C CNN
@ -564,10 +564,10 @@ F 3 "" H 6200 3950 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:-15V #PWR0126
L power:-15V #PWR0218
U 1 1 6044025E
P 6200 5050
F 0 "#PWR0126" H 6200 5150 50 0001 C CNN
F 0 "#PWR0218" H 6200 5150 50 0001 C CNN
F 1 "-15V" H 6215 5223 50 0000 C CNN
F 2 "" H 6200 5050 50 0001 C CNN
F 3 "" H 6200 5050 50 0001 C CNN
@ -575,10 +575,10 @@ F 3 "" H 6200 5050 50 0001 C CNN
-1 0 0 1
$EndComp
$Comp
L JBeyerstedt-Library:DRV134PA U4
L JBeyerstedt-Library:DRV134PA U202
U 1 1 603FAC5E
P 6300 4200
F 0 "U4" H 7100 4687 60 0000 C CNN
F 0 "U202" H 7100 4687 60 0000 C CNN
F 1 "DRV134PA" H 7100 4581 60 0000 C CNN
F 2 "Package_DIP:DIP-8_W7.62mm_Socket_LongPads" H 7100 4540 60 0001 C CNN
F 3 "https://www.ti.com/lit/ds/symlink/drv134.pdf" H 7100 4581 60 0001 C CNN
@ -618,10 +618,10 @@ Wire Wire Line
Text Notes 6600 5300 0 50 ~ 10
Line driver\nGain: 6 dB
$Comp
L power:GND #PWR0127
L power:GND #PWR0220
U 1 1 5FD7D2A6
P 3950 5100
F 0 "#PWR0127" H 3950 4850 50 0001 C CNN
F 0 "#PWR0220" H 3950 4850 50 0001 C CNN
F 1 "GND" H 3955 4927 50 0000 C CNN
F 2 "" H 3950 5100 50 0001 C CNN
F 3 "" H 3950 5100 50 0001 C CNN
@ -646,10 +646,10 @@ Wire Wire Line
Text Notes 3150 5300 0 50 ~ 10
Summing Module\nGain: 0 dB
$Comp
L Device:C C15
L Device:C C205
U 1 1 5FD269DB
P 4200 3950
F 0 "C15" V 3948 3950 50 0000 C CNN
F 0 "C205" V 3948 3950 50 0000 C CNN
F 1 "22pF" V 4039 3950 50 0000 C CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 4238 3800 50 0001 C CNN
F 3 "~" H 4200 3950 50 0001 C CNN
@ -657,10 +657,10 @@ F 3 "~" H 4200 3950 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R20
L Device:R R211
U 1 1 5FD25F73
P 4500 4300
F 0 "R20" V 4293 4300 50 0000 C CNN
F 0 "R211" V 4293 4300 50 0000 C CNN
F 1 "22K" V 4384 4300 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 4430 4300 50 0001 C CNN
F 3 "~" H 4500 4300 50 0001 C CNN
@ -668,10 +668,10 @@ F 3 "~" H 4500 4300 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Device:R R23
L Device:R R213
U 1 1 5FD258D7
P 3400 4850
F 0 "R23" V 3193 4850 50 0000 C CNN
F 0 "R213" V 3193 4850 50 0000 C CNN
F 1 "22K" V 3284 4850 50 0000 C CNN
F 2 "Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal" V 3330 4850 50 0001 C CNN
F 3 "~" H 3400 4850 50 0001 C CNN
@ -679,10 +679,10 @@ F 3 "~" H 3400 4850 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L Amplifier_Operational:LM358 U5
L Amplifier_Operational:LM358 U203
U 3 1 5FCF1284
P 1500 4450
F 0 "U5" V 1175 4450 50 0000 C CNN
F 0 "U203" V 1175 4450 50 0000 C CNN
F 1 "LM833N" V 1266 4450 50 0000 C CNN
F 2 "Package_DIP:DIP-8_W7.62mm_Socket_LongPads" H 1500 4450 50 0001 C CNN
F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 1500 4450 50 0001 C CNN
@ -690,10 +690,10 @@ F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 1500 4450 50 0001 C CNN
0 1 1 0
$EndComp
$Comp
L power:-15V #PWR0128
L power:-15V #PWR0211
U 1 1 5FCF127E
P 1100 4250
F 0 "#PWR0128" H 1100 4350 50 0001 C CNN
F 0 "#PWR0211" H 1100 4350 50 0001 C CNN
F 1 "-15V" H 1115 4423 50 0000 C CNN
F 2 "" H 1100 4250 50 0001 C CNN
F 3 "" H 1100 4250 50 0001 C CNN
@ -701,10 +701,10 @@ F 3 "" H 1100 4250 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:+15V #PWR0129
L power:+15V #PWR0212
U 1 1 5FCF1278
P 1900 4250
F 0 "#PWR0129" H 1900 4100 50 0001 C CNN
F 0 "#PWR0212" H 1900 4100 50 0001 C CNN
F 1 "+15V" H 1915 4423 50 0000 C CNN
F 2 "" H 1900 4250 50 0001 C CNN
F 3 "" H 1900 4250 50 0001 C CNN
@ -726,10 +726,10 @@ Connection ~ 1100 4350
Wire Wire Line
1100 4350 1200 4350
$Comp
L Device:C C18
L Device:C C208
U 1 1 5FCF126A
P 1900 4600
F 0 "C18" H 1785 4554 50 0000 R CNN
F 0 "C208" H 1785 4554 50 0000 R CNN
F 1 "100nF" H 1785 4645 50 0000 R CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 1938 4450 50 0001 C CNN
F 3 "~" H 1900 4600 50 0001 C CNN
@ -737,10 +737,10 @@ F 3 "~" H 1900 4600 50 0001 C CNN
-1 0 0 1
$EndComp
$Comp
L Device:C C17
L Device:C C207
U 1 1 5FCF1264
P 1100 4600
F 0 "C17" H 985 4554 50 0000 R CNN
F 0 "C207" H 985 4554 50 0000 R CNN
F 1 "100nF" H 985 4645 50 0000 R CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 1138 4450 50 0001 C CNN
F 3 "~" H 1100 4600 50 0001 C CNN
@ -748,10 +748,10 @@ F 3 "~" H 1100 4600 50 0001 C CNN
-1 0 0 1
$EndComp
$Comp
L power:GND #PWR0130
L power:GND #PWR0213
U 1 1 5FCF125E
P 1100 4750
F 0 "#PWR0130" H 1100 4500 50 0001 C CNN
F 0 "#PWR0213" H 1100 4500 50 0001 C CNN
F 1 "GND" H 1105 4577 50 0000 C CNN
F 2 "" H 1100 4750 50 0001 C CNN
F 3 "" H 1100 4750 50 0001 C CNN
@ -759,10 +759,10 @@ F 3 "" H 1100 4750 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0131
L power:GND #PWR0214
U 1 1 5FCF1258
P 1900 4750
F 0 "#PWR0131" H 1900 4500 50 0001 C CNN
F 0 "#PWR0214" H 1900 4500 50 0001 C CNN
F 1 "GND" H 1905 4577 50 0000 C CNN
F 2 "" H 1900 4750 50 0001 C CNN
F 3 "" H 1900 4750 50 0001 C CNN
@ -770,10 +770,10 @@ F 3 "" H 1900 4750 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Amplifier_Operational:LM358 U5
L Amplifier_Operational:LM358 U203
U 1 1 5FCC6AFD
P 4350 4800
F 0 "U5" H 4350 4433 50 0000 C CNN
F 0 "U203" H 4350 4433 50 0000 C CNN
F 1 "LM833N" H 4350 4524 50 0000 C CNN
F 2 "Package_DIP:DIP-8_W7.62mm_Socket_LongPads" H 4350 4800 50 0001 C CNN
F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 4350 4800 50 0001 C CNN
@ -781,22 +781,22 @@ F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 4350 4800 50 0001 C CNN
1 0 0 1
$EndComp
$Comp
L Connector:XLR3_Ground J4
L Connector:XLR3_Ground J202
U 1 1 5F82013F
P 8500 4150
F 0 "J4" H 8500 4515 50 0000 C CNN
F 0 "J202" H 8500 4515 50 0000 C CNN
F 1 "Mix Line-Out" H 8500 4424 50 0000 C CNN
F 2 "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" H 8500 4150 50 0001 C CNN
F 3 "https://www.neutrik.com/de/produkt/nc3md-lx.pdf" H 8500 4150 50 0001 C CNN
F 4 "XLR (male)" H 8500 4150 50 0001 C CNN "Model"
F 2 "Connector_Audio:Jack_XLR_Neutrik_NC3MAAH_Horizontal" H 8500 4150 50 0001 C CNN
F 3 "https://www.neutrik.com/media/8341/download/nc3maah-1.pdf" H 8500 4150 50 0001 C CNN
F 4 "NC3MAAH (Horiz. XLR Male)" H 8500 4150 50 0001 C CNN "Model"
1 8500 4150
-1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0121
L power:GND #PWR0204
U 1 1 5F93633D
P 9900 2250
F 0 "#PWR0121" H 9900 2000 50 0001 C CNN
F 0 "#PWR0204" H 9900 2000 50 0001 C CNN
F 1 "GND" H 9905 2077 50 0000 C CNN
F 2 "" H 9900 2250 50 0001 C CNN
F 3 "" H 9900 2250 50 0001 C CNN
@ -804,10 +804,10 @@ F 3 "" H 9900 2250 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR0120
L power:GND #PWR0203
U 1 1 5F9381DA
P 9100 2250
F 0 "#PWR0120" H 9100 2000 50 0001 C CNN
F 0 "#PWR0203" H 9100 2000 50 0001 C CNN
F 1 "GND" H 9105 2077 50 0000 C CNN
F 2 "" H 9100 2250 50 0001 C CNN
F 3 "" H 9100 2250 50 0001 C CNN
@ -815,10 +815,10 @@ F 3 "" H 9100 2250 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Device:C C12
L Device:C C203
U 1 1 5F93A49E
P 9100 2100
F 0 "C12" H 8985 2054 50 0000 R CNN
F 0 "C203" H 8985 2054 50 0000 R CNN
F 1 "100nF" H 8985 2145 50 0000 R CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 9138 1950 50 0001 C CNN
F 3 "~" H 9100 2100 50 0001 C CNN
@ -826,10 +826,10 @@ F 3 "~" H 9100 2100 50 0001 C CNN
-1 0 0 1
$EndComp
$Comp
L Device:C C14
L Device:C C204
U 1 1 5F93AE68
P 9900 2100
F 0 "C14" H 9785 2054 50 0000 R CNN
F 0 "C204" H 9785 2054 50 0000 R CNN
F 1 "100nF" H 9785 2145 50 0000 R CNN
F 2 "Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm" H 9938 1950 50 0001 C CNN
F 3 "~" H 9900 2100 50 0001 C CNN
@ -844,10 +844,10 @@ Wire Wire Line
Wire Wire Line
9100 1850 9100 1950
$Comp
L power:+15V #PWR0119
L power:+15V #PWR0202
U 1 1 5F939835
P 9900 1750
F 0 "#PWR0119" H 9900 1600 50 0001 C CNN
F 0 "#PWR0202" H 9900 1600 50 0001 C CNN
F 1 "+15V" H 9915 1923 50 0000 C CNN
F 2 "" H 9900 1750 50 0001 C CNN
F 3 "" H 9900 1750 50 0001 C CNN
@ -855,10 +855,10 @@ F 3 "" H 9900 1750 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:-15V #PWR0110
L power:-15V #PWR0201
U 1 1 5F938A79
P 9100 1750
F 0 "#PWR0110" H 9100 1850 50 0001 C CNN
F 0 "#PWR0201" H 9100 1850 50 0001 C CNN
F 1 "-15V" H 9115 1923 50 0000 C CNN
F 2 "" H 9100 1750 50 0001 C CNN
F 3 "" H 9100 1750 50 0001 C CNN
@ -866,10 +866,10 @@ F 3 "" H 9100 1750 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Amplifier_Operational:LM358 U3
L Amplifier_Operational:LM358 U201
U 3 1 5F92849F
P 9500 1950
F 0 "U3" V 9175 1950 50 0000 C CNN
F 0 "U201" V 9175 1950 50 0000 C CNN
F 1 "LM833N" V 9266 1950 50 0000 C CNN
F 2 "Package_DIP:DIP-8_W7.62mm_Socket_LongPads" H 9500 1950 50 0001 C CNN
F 3 "https://www.ti.com/lit/ds/symlink/lm833.pdf" H 9500 1950 50 0001 C CNN
@ -908,14 +908,10 @@ Wire Wire Line
2800 1850 2900 1850
Connection ~ 2800 1850
$Comp
L Jumper:SolderJumper_2_Open JP?
L Jumper:SolderJumper_2_Open JP201
U 1 1 6330DA77
P 2300 2600
AR Path="/60AA662F/6330DA77" Ref="JP?" Part="1"
AR Path="/60AE7597/6330DA77" Ref="JP?" Part="1"
AR Path="/60AE80F3/6330DA77" Ref="JP?" Part="1"
AR Path="/60AE0DAE/6330DA77" Ref="JP7" Part="1"
F 0 "JP7" H 2300 2805 50 0000 C CNN
F 0 "JP201" H 2300 2805 50 0000 C CNN
F 1 "GND_JMP" H 2300 2714 50 0000 C CNN
F 2 "Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm" H 2300 2600 50 0001 C CNN
F 3 "~" H 2300 2600 50 0001 C CNN
@ -934,32 +930,26 @@ Wire Wire Line
2400 2400 2450 2400
Wire Wire Line
2450 2400 2450 2600
Wire Wire Line
2450 2600 2450 2700
Connection ~ 2450 2600
$Comp
L power:GNDREF #PWR?
L power:GNDREF #PWR0208
U 1 1 6332BE86
P 2150 2750
AR Path="/60AA662F/6332BE86" Ref="#PWR?" Part="1"
AR Path="/60AE7597/6332BE86" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/6332BE86" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/6332BE86" Ref="#PWR0107" Part="1"
F 0 "#PWR0107" H 2150 2500 50 0001 C CNN
F 1 "GNDREF" H 2155 2577 50 0000 C CNN
F 2 "" H 2150 2750 50 0001 C CNN
F 3 "" H 2150 2750 50 0001 C CNN
1 2150 2750
P 2450 2750
F 0 "#PWR0208" H 2450 2500 50 0001 C CNN
F 1 "GNDREF" H 2455 2577 50 0000 C CNN
F 2 "" H 2450 2750 50 0001 C CNN
F 3 "" H 2450 2750 50 0001 C CNN
1 2450 2750
1 0 0 -1
$EndComp
Wire Wire Line
2150 2600 2150 2750
Connection ~ 2150 2600
$Comp
L power:GND #PWR0108
L power:GND #PWR0215
U 1 1 63342BC7
P 8900 4850
F 0 "#PWR0108" H 8900 4600 50 0001 C CNN
F 0 "#PWR0215" H 8900 4600 50 0001 C CNN
F 1 "GND" H 8905 4677 50 0000 C CNN
F 2 "" H 8900 4850 50 0001 C CNN
F 3 "" H 8900 4850 50 0001 C CNN
@ -967,32 +957,24 @@ F 3 "" H 8900 4850 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L Jumper:SolderJumper_2_Open JP?
L Jumper:SolderJumper_2_Open JP202
U 1 1 63342BCD
P 8750 4750
AR Path="/60AA662F/63342BCD" Ref="JP?" Part="1"
AR Path="/60AE7597/63342BCD" Ref="JP?" Part="1"
AR Path="/60AE80F3/63342BCD" Ref="JP?" Part="1"
AR Path="/60AE0DAE/63342BCD" Ref="JP8" Part="1"
F 0 "JP8" H 8750 4955 50 0000 C CNN
F 0 "JP202" H 8750 4955 50 0000 C CNN
F 1 "GND_JMP" H 8750 4864 50 0000 C CNN
F 2 "Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm" H 8750 4750 50 0001 C CNN
F 3 "~" H 8750 4750 50 0001 C CNN
1 8750 4750
1 0 0 -1
-1 0 0 -1
$EndComp
Wire Wire Line
8900 4750 8900 4850
Connection ~ 8900 4750
$Comp
L power:GNDREF #PWR?
L power:GNDREF #PWR0216
U 1 1 63342BD7
P 8600 4900
AR Path="/60AA662F/63342BD7" Ref="#PWR?" Part="1"
AR Path="/60AE7597/63342BD7" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/63342BD7" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/63342BD7" Ref="#PWR0109" Part="1"
F 0 "#PWR0109" H 8600 4650 50 0001 C CNN
F 0 "#PWR0216" H 8600 4650 50 0001 C CNN
F 1 "GNDREF" H 8605 4727 50 0000 C CNN
F 2 "" H 8600 4900 50 0001 C CNN
F 3 "" H 8600 4900 50 0001 C CNN
@ -1009,14 +991,10 @@ Wire Wire Line
Wire Wire Line
8600 4450 8600 4750
$Comp
L power:GND #PWR?
L power:GND #PWR0223
U 1 1 6338E071
P 3500 7500
AR Path="/60AA662F/6338E071" Ref="#PWR?" Part="1"
AR Path="/60AE7597/6338E071" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/6338E071" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/6338E071" Ref="#PWR0132" Part="1"
F 0 "#PWR0132" H 3500 7250 50 0001 C CNN
F 0 "#PWR0223" H 3500 7250 50 0001 C CNN
F 1 "GND" H 3505 7327 50 0000 C CNN
F 2 "" H 3500 7500 50 0001 C CNN
F 3 "" H 3500 7500 50 0001 C CNN
@ -1024,14 +1002,10 @@ F 3 "" H 3500 7500 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:+15V #PWR?
L power:+15V #PWR0222
U 1 1 6338E077
P 3700 7200
AR Path="/60AA662F/6338E077" Ref="#PWR?" Part="1"
AR Path="/60AE7597/6338E077" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/6338E077" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/6338E077" Ref="#PWR0133" Part="1"
F 0 "#PWR0133" H 3700 7050 50 0001 C CNN
F 0 "#PWR0222" H 3700 7050 50 0001 C CNN
F 1 "+15V" H 3715 7373 50 0000 C CNN
F 2 "" H 3700 7200 50 0001 C CNN
F 3 "" H 3700 7200 50 0001 C CNN
@ -1039,14 +1013,10 @@ F 3 "" H 3700 7200 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:-15V #PWR?
L power:-15V #PWR0221
U 1 1 6338E07D
P 3500 7100
AR Path="/60AA662F/6338E07D" Ref="#PWR?" Part="1"
AR Path="/60AE7597/6338E07D" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/6338E07D" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/6338E07D" Ref="#PWR0134" Part="1"
F 0 "#PWR0134" H 3500 7200 50 0001 C CNN
F 0 "#PWR0221" H 3500 7200 50 0001 C CNN
F 1 "-15V" H 3515 7273 50 0000 C CNN
F 2 "" H 3500 7100 50 0001 C CNN
F 3 "" H 3500 7100 50 0001 C CNN
@ -1058,16 +1028,12 @@ Wire Wire Line
Wire Wire Line
3500 7400 3500 7500
$Comp
L Connector:Conn_01x03_Male J?
L Connector:Conn_01x03_Male J203
U 1 1 6338E085
P 3000 7300
AR Path="/60AA662F/6338E085" Ref="J?" Part="1"
AR Path="/60AE7597/6338E085" Ref="J?" Part="1"
AR Path="/60AE80F3/6338E085" Ref="J?" Part="1"
AR Path="/60AE0DAE/6338E085" Ref="J6" Part="1"
F 0 "J6" H 3108 7581 50 0000 C CNN
F 0 "J203" H 3108 7581 50 0000 C CNN
F 1 "PowerSupply" H 3108 7490 50 0000 C CNN
F 2 "TerminalBlock_MetzConnect:TerminalBlock_MetzConnect_Type101_RT01603HBWC_1x03_P5.08mm_Horizontal" H 3000 7300 50 0001 C CNN
F 2 "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-3-2.5-H-THR_1x03_P2.50mm_Horizontal" H 3000 7300 50 0001 C CNN
F 3 "" H 3000 7300 50 0001 C CNN
1 3000 7300
1 0 0 1
@ -1081,46 +1047,22 @@ Wire Wire Line
Wire Wire Line
3200 7400 3500 7400
$Comp
L Connector:Conn_01x02_Male J?
U 1 1 6338E093
P 4500 7400
AR Path="/60AA662F/6338E093" Ref="J?" Part="1"
AR Path="/60AE7597/6338E093" Ref="J?" Part="1"
AR Path="/60AE80F3/6338E093" Ref="J?" Part="1"
AR Path="/60AE0DAE/6338E093" Ref="J20" Part="1"
F 0 "J20" H 4473 7282 50 0000 R CNN
F 1 "Output" H 4473 7373 50 0000 R CNN
F 2 "Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical" H 4500 7400 50 0001 C CNN
F 3 "~" H 4500 7400 50 0001 C CNN
F 4 "TODO: Actual Connector" H 4500 7400 50 0001 C CNN "Model"
1 4500 7400
1 0 0 1
$EndComp
$Comp
L Connector:Conn_01x04_Male J?
L Connector:Conn_01x04_Male J204
U 1 1 6338E09A
P 5500 7300
AR Path="/60AA662F/6338E09A" Ref="J?" Part="1"
AR Path="/60AE7597/6338E09A" Ref="J?" Part="1"
AR Path="/60AE80F3/6338E09A" Ref="J?" Part="1"
AR Path="/60AE0DAE/6338E09A" Ref="J19" Part="1"
F 0 "J19" H 5473 7182 50 0000 R CNN
F 0 "J204" H 5473 7182 50 0000 R CNN
F 1 "Inputs" H 5473 7273 50 0000 R CNN
F 2 "Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical" H 5500 7300 50 0001 C CNN
F 2 "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-4-2.5-V-THR_1x04_P2.50mm_Vertical" H 5500 7300 50 0001 C CNN
F 3 "~" H 5500 7300 50 0001 C CNN
F 4 "TODO: Actual Connector" H 5500 7300 50 0001 C CNN "Model"
F 4 "PTSM 0,5/ 4-2,5-V THR" H 5500 7300 50 0001 C CNN "Model"
1 5500 7300
1 0 0 1
$EndComp
$Comp
L power:GND #PWR?
L power:GND #PWR0224
U 1 1 6338E0A0
P 4900 7500
AR Path="/60AA662F/6338E0A0" Ref="#PWR?" Part="1"
AR Path="/60AE7597/6338E0A0" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/6338E0A0" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/6338E0A0" Ref="#PWR0135" Part="1"
F 0 "#PWR0135" H 4900 7250 50 0001 C CNN
F 0 "#PWR0224" H 4900 7250 50 0001 C CNN
F 1 "GND" H 4905 7327 50 0000 C CNN
F 2 "" H 4900 7500 50 0001 C CNN
F 3 "" H 4900 7500 50 0001 C CNN
@ -1128,14 +1070,10 @@ F 3 "" H 4900 7500 50 0001 C CNN
1 0 0 -1
$EndComp
$Comp
L power:GND #PWR?
L power:GND #PWR0225
U 1 1 6338E0A6
P 5900 7500
AR Path="/60AA662F/6338E0A6" Ref="#PWR?" Part="1"
AR Path="/60AE7597/6338E0A6" Ref="#PWR?" Part="1"
AR Path="/60AE80F3/6338E0A6" Ref="#PWR?" Part="1"
AR Path="/60AE0DAE/6338E0A6" Ref="#PWR0161" Part="1"
F 0 "#PWR0161" H 5900 7250 50 0001 C CNN
F 0 "#PWR0225" H 5900 7250 50 0001 C CNN
F 1 "GND" H 5905 7327 50 0000 C CNN
F 2 "" H 5900 7500 50 0001 C CNN
F 3 "" H 5900 7500 50 0001 C CNN
@ -1174,4 +1112,40 @@ Text HLabel 6050 7000 1 50 Output ~ 0
Mix_Ch2
Text HLabel 5900 7000 1 50 Output ~ 0
Mix_Ch3
Wire Wire Line
2450 2600 2450 2750
$Comp
L Connector:Conn_01x02_Male J205
U 1 1 6338E093
P 4500 7400
F 0 "J205" H 4473 7282 50 0000 R CNN
F 1 "Output" H 4473 7373 50 0000 R CNN
F 2 "TerminalBlock_Phoenix:TerminalBlock_Phoenix_PTSM-0,5-2-2.5-V-THR_1x02_P2.50mm_Vertical" H 4500 7400 50 0001 C CNN
F 3 "~" H 4500 7400 50 0001 C CNN
F 4 "PTSM 0,5/ 2-2,5-V THR" H 4500 7400 50 0001 C CNN "Model"
1 4500 7400
1 0 0 1
$EndComp
$Comp
L Mechanical:MountingHole H201
U 1 1 6148253B
P 1500 7000
F 0 "H201" H 1600 7046 50 0000 L CNN
F 1 "MountingHole" H 1600 6955 50 0000 L CNN
F 2 "MountingHole:MountingHole_3.2mm_M3" H 1500 7000 50 0001 C CNN
F 3 "~" H 1500 7000 50 0001 C CNN
1 1500 7000
1 0 0 -1
$EndComp
$Comp
L Mechanical:MountingHole H202
U 1 1 614829AA
P 1500 7250
F 0 "H202" H 1600 7296 50 0000 L CNN
F 1 "MountingHole" H 1600 7205 50 0000 L CNN
F 2 "MountingHole:MountingHole_3.2mm_M3" H 1500 7250 50 0001 C CNN
F 3 "~" H 1500 7250 50 0001 C CNN
1 1500 7250
1 0 0 -1
$EndComp
$EndSCHEMATC

View File

@ -0,0 +1,3 @@
(fp_lib_table
(lib (name c3lingo_unit-footprints)(type KiCad)(uri ${KIPRJMOD}/../kicad-libraries/c3lingo_unit-footprints.pretty)(options "")(descr ""))
)

View File

@ -0,0 +1,3 @@
(fp_lib_table
(lib (name c3lingo_unit-footprints)(type KiCad)(uri ${KIPRJMOD}/kicad-libraries/c3lingo_unit-footprints.pretty)(options "")(descr ""))
)

View File

@ -0,0 +1,43 @@
(module Potentiometer_Alps_RK09K_Double_Vertical (layer F.Cu) (tedit 60B15712)
(descr "Potentiometer, vertical, Alps RK09L Double, http://www.alps.com/prod/info/E/HTML/Potentiometer/RotaryPotentiometers/RK09L/RK09L_list.html")
(tags "Potentiometer vertical Alps RK09L Double")
(fp_text reference REF** (at 4.475 -10.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value Potentiometer_Alps_RK09K_Double_Vertical (at 4.475 5.5) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start 12.6 -9.5) (end -3.65 -9.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 12.6 4.5) (end 12.6 -9.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.65 4.5) (end 12.6 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start -3.65 -9.5) (end -3.65 4.5) (layer F.CrtYd) (width 0.05))
(fp_line (start 12.47 -8.67) (end 12.47 3.67) (layer F.SilkS) (width 0.12))
(fp_line (start 0.88 0.87) (end 0.88 3.67) (layer F.SilkS) (width 0.12))
(fp_line (start 0.88 -1.629) (end 0.88 -0.87) (layer F.SilkS) (width 0.12))
(fp_line (start 0.88 -4.129) (end 0.88 -3.37) (layer F.SilkS) (width 0.12))
(fp_line (start 0.88 -8.67) (end 0.88 -5.871) (layer F.SilkS) (width 0.12))
(fp_line (start 9.455 3.67) (end 12.47 3.67) (layer F.SilkS) (width 0.12))
(fp_line (start 0.88 3.67) (end 5.546 3.67) (layer F.SilkS) (width 0.12))
(fp_line (start 9.455 -8.67) (end 12.47 -8.67) (layer F.SilkS) (width 0.12))
(fp_line (start 0.88 -8.67) (end 5.546 -8.67) (layer F.SilkS) (width 0.12))
(fp_line (start 12.35 -8.55) (end 1 -8.55) (layer F.Fab) (width 0.1))
(fp_line (start 12.35 3.55) (end 12.35 -8.55) (layer F.Fab) (width 0.1))
(fp_line (start 1 3.55) (end 12.35 3.55) (layer F.Fab) (width 0.1))
(fp_line (start 1 -8.55) (end 1 3.55) (layer F.Fab) (width 0.1))
(fp_circle (center 7.5 -2.5) (end 10.5 -2.5) (layer F.Fab) (width 0.1))
(fp_text user %R (at 2 -2.5 90) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(pad "" np_thru_hole circle (at 7.5 2.25) (size 4 4) (drill 2) (layers *.Cu *.Mask))
(pad "" np_thru_hole circle (at 7.5 -7.25) (size 4 4) (drill 2) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at -2.5 0) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask))
(pad 5 thru_hole circle (at -2.5 -5) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask))
(pad 3 thru_hole circle (at 0 0) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask))
(pad 6 thru_hole circle (at 0 -2.5) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask))
(pad 1 thru_hole circle (at 0 -5 90) (size 1.8 1.8) (drill 1) (layers *.Cu *.Mask))
(model ${KISYS3DMOD}/Potentiometer_THT.3dshapes/Potentiometer_Alps_RK09L_Double_Vertical.wrl
(at (xyz 0 0 0))
(scale (xyz 1 1 1))
(rotate (xyz 0 0 0))
)
)

View File

@ -0,0 +1,22 @@
(module SW_APEM_MHPS2273_DPDT (layer F.Cu) (tedit 60B14EA2)
(fp_text reference REF** (at 0.3 4.5) (layer F.SilkS)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_text value SW_APEM_MHPS2273_DPDT (at 0.7 -5) (layer F.Fab)
(effects (font (size 1 1) (thickness 0.15)))
)
(fp_line (start -3.6 3.6) (end -3.6 -3.6) (layer F.SilkS) (width 0.12))
(fp_line (start 3.6 3.6) (end -3.6 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start 3.6 -3.6) (end 3.6 3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -3.6 -3.6) (end 3.6 -3.6) (layer F.SilkS) (width 0.12))
(fp_line (start -5.8 -5.8) (end 5.8 -5.8) (layer F.CrtYd) (width 0.02))
(fp_line (start 5.8 -5.8) (end 5.8 5.8) (layer F.CrtYd) (width 0.02))
(fp_line (start 5.8 5.8) (end -5.8 5.8) (layer F.CrtYd) (width 0.02))
(fp_line (start -5.8 5.8) (end -5.8 -5.8) (layer F.CrtYd) (width 0.02))
(pad 1 thru_hole circle (at -2 -2.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 2 thru_hole circle (at 0 -2.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 3 thru_hole circle (at 2 -2.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 4 thru_hole circle (at -2 2.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 5 thru_hole circle (at 0 2.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
(pad 6 thru_hole circle (at 2 2.5) (size 1.7 1.7) (drill 1) (layers *.Cu *.Mask))
)