# generated by Slic3r 1.3.0 on 2020-03-19 09:56:22
bed_shape = 5x0,195x0,195x190,5x190
before_layer_gcode = 
between_objects_gcode = 
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode = G4 P500; wait 500ms, trigger octolapse
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.4
octoprint_apikey = 
pressure_advance = 0
print_host = octoprusa.fra80
printer_notes = 
printer_settings_id = 
retract_before_travel = 2
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port = 
serial_speed = 250000
start_gcode = G92 O ; pseudo gcode for octolapse homing\nG1 F2000 X50 Y100 Z5; start pos
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0