# generated by Slic3r 1.3.0 on 2020-03-19 09:52:15
adaptive_slicing = 1
adaptive_slicing_quality = 75%
avoid_crossing_perimeters = 0
bottom_infill_pattern = rectilinear
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 0
brim_connections_width = 0
brim_width = 0
compatible_printers = 
complete_objects = 1
default_acceleration = 0
dont_support_bridges = 1
external_perimeter_extrusion_width = 0
external_perimeter_speed = 75%
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 18
extruder_clearance_radius = 15
extrusion_width = 0
fill_angle = 45
fill_density = 30%
fill_gaps = 1
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_extrusion_width = 150%
first_layer_height = 0.3
first_layer_speed = 75%
gap_fill_speed = 0
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 150%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 0
interface_shells = 0
interior_brim_width = 0
layer_height = 0.2
match_horizontal_surfaces = 0
max_print_speed = 70
max_volumetric_speed = 16
min_skirt_length = 3
notes = 16 mm3/s and 70 mm/s is too much\n- lowered max speed from 70 to 60, volumetric from 16 to 14 + faster top solid from 50% to 75%\n- first layer is now very slow -> increase first layer speed from 50% to 75%\n- back to start, 16mm3/s, 70mm/s max; first layer 75%, top solid 75% -> ok with RDDRONE Top Case
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 35
perimeters = 2
post_process = 
print_settings_id = 
raft_layers = 0
regions_overlap = 0
resolution = 0
seam_position = aligned
shortcuts = complete_objects;fill_density;fill_pattern;adaptive_slicing_quality;layer_height;seam_position;spiral_vase;adaptive_slicing;dont_support_bridges;support_material;raft_layers;support_material_buildplate_only
skirt_distance = 5
skirt_height = 1
skirts = 1
small_perimeter_speed = 35%
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 125%
solid_infill_speed = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_extrusion_width = 0
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_max_layers = 0
support_material_pattern = rectilinear
support_material_spacing = 2.5
support_material_speed = 0
support_material_threshold = 60%
thin_walls = 1
top_infill_extrusion_width = 0
top_infill_pattern = rectilinear
top_solid_infill_speed = 75%
top_solid_layers = 3
travel_speed = 100
xy_size_compensation = 0