tweaked settings, new output format

PrusaSlicer.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 15:13:18 UTC
+# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 17:32:16 UTC
 autocenter = 0
 background_processing = 0
 custom_toolbar_size = 100
@@ -15,14 +15,14 @@ use_retina_opengl = 1
 version = 2.1.1+
 version_check = 1
 version_online = 2.1.1
-version_online_seen = 2.1.0
+version_online_seen = 2.1.1
 view_mode = expert
 window_mainframe = 0; 23; 1440; 838; 1
 
 [presets]
-filament = PLA-black-bedOff
+filament = DasFilament-PLA-black-3.00
-print = prusa-i3-h02
+print = prusa_i3_JB-h02
-printer = prusa-i3-JB
+printer = prusa_i3_JB
 sla_material = 
 sla_print = 
 

filament/DasFilament-PLA-black-3.00.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 15:42:21 UTC
+# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 16:59:36 UTC
 bed_temperature = 0
 bridge_fan_speed = 100
 compatible_printers = 
@@ -49,6 +49,6 @@ inherits =
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 10
-slowdown_below_layer_time = 20
+slowdown_below_layer_time = 10
 start_filament_gcode = "; Filament gcode\n"
-temperature = 203
+temperature = 200

print/prusa_i3_JB-h02.ini

@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.1.1+ on 2020-03-23 at 15:40:42 UTC
+# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 09:24:15 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -23,7 +23,7 @@ extruder_clearance_height = 20
 extruder_clearance_radius = 20
 extrusion_width = 0
 fill_angle = 45
-fill_density = 15%
+fill_density = 30%
 fill_pattern = stars
 first_layer_acceleration = 0
 first_layer_extrusion_width = 150%
@@ -43,13 +43,13 @@ infill_speed = 0
 inherits = 
 interface_shells = 0
 layer_height = 0.2
-max_print_speed = 70
+max_print_speed = 65
 max_volumetric_speed = 16
 min_skirt_length = 3
-notes = 
+notes = 16 mm3/s and 70 mm/s is fine!
 only_retract_when_crossing_perimeters = 1
 ooze_prevention = 0
-output_filename_format = [input_filename_base]-h[layer_height]-f[fill_density]-prusa.gcode
+output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[max_print_speed].gcode
 overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
@@ -81,7 +81,7 @@ support_material_buildplate_only = 0
 support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
-support_material_extrusion_width = 0.35
+support_material_extrusion_width = 0
 support_material_interface_contact_loops = 0
 support_material_interface_extruder = 1
 support_material_interface_layers = 3

print/prusa_i3_JB-h03.ini

@@ -0,0 +1,110 @@
+# generated by PrusaSlicer 2.1.1+ on 2020-03-24 at 09:24:09 UTC
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 0
+brim_width = 0
+clip_multipart_objects = 0
+compatible_printers = 
+compatible_printers_condition = 
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 0
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 75%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0
+fill_angle = 45
+fill_density = 30%
+fill_pattern = stars
+first_layer_acceleration = 0
+first_layer_extrusion_width = 150%
+first_layer_height = 0.3
+first_layer_speed = 75%
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 0
+inherits = 
+interface_shells = 0
+layer_height = 0.3
+max_print_speed = 65
+max_volumetric_speed = 16
+min_skirt_length = 3
+notes = 16 mm3/s and 70 mm/s is fine!
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base]-h[layer_height]-[fill_pattern]_[fill_density]-s[max_print_speed].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 0
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 1
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slice_closing_radius = 0.049
+small_perimeter_speed = 35%
+solid_infill_below_area = 50
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 0
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thin_walls = 1
+threads = 8
+top_fill_pattern = rectilinear
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 75%
+top_solid_layers = 3
+travel_speed = 100
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0