From 1be743466625876d2319494c82b923a17eb33ca9 Mon Sep 17 00:00:00 2001 From: Jannik Beyerstedt Date: Wed, 1 Jul 2020 21:41:24 +0200 Subject: [PATCH] [WIP] do not use auto speed, b/c it doesn't work Autospeed works fine for some models, but others will only be printer very slowly (10 mm/s instead of 50-65 mm/s) --- filament/DasFilament-PLA-black-3.00.ini | 6 +++--- filament/DasFilament-PLA-red-3.00.ini | 6 +++--- print/prusa_i3_JB-h02.ini | 14 +++++++------- print/prusa_i3_JB-h03.ini | 14 +++++++------- 4 files changed, 20 insertions(+), 20 deletions(-) diff --git a/filament/DasFilament-PLA-black-3.00.ini b/filament/DasFilament-PLA-black-3.00.ini index 822531d..249841d 100644 --- a/filament/DasFilament-PLA-black-3.00.ini +++ b/filament/DasFilament-PLA-black-3.00.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:23 UTC +# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:37:18 UTC bed_temperature = 0 bridge_fan_speed = 100 compatible_printers = @@ -10,7 +10,7 @@ disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 -fan_below_layer_time = 30 +fan_below_layer_time = 60 filament_colour = #000000 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 @@ -50,6 +50,6 @@ inherits = max_fan_speed = 100 min_fan_speed = 30 min_print_speed = 10 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 200 diff --git a/filament/DasFilament-PLA-red-3.00.ini b/filament/DasFilament-PLA-red-3.00.ini index 6965cc0..f067f00 100644 --- a/filament/DasFilament-PLA-red-3.00.ini +++ b/filament/DasFilament-PLA-red-3.00.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:20 UTC +# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:37:11 UTC bed_temperature = 0 bridge_fan_speed = 100 compatible_printers = @@ -10,7 +10,7 @@ disable_fan_first_layers = 3 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" extrusion_multiplier = 1 fan_always_on = 0 -fan_below_layer_time = 30 +fan_below_layer_time = 60 filament_colour = #FB0207 filament_cooling_final_speed = 3.4 filament_cooling_initial_speed = 2.2 @@ -50,6 +50,6 @@ inherits = max_fan_speed = 100 min_fan_speed = 30 min_print_speed = 10 -slowdown_below_layer_time = 10 +slowdown_below_layer_time = 5 start_filament_gcode = "; Filament gcode\n" temperature = 200 diff --git a/print/prusa_i3_JB-h02.ini b/print/prusa_i3_JB-h02.ini index f84dbc3..2ca833e 100644 --- a/print/prusa_i3_JB-h02.ini +++ b/print/prusa_i3_JB-h02.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:03:59 UTC +# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:35:27 UTC avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 2 @@ -6,7 +6,7 @@ bottom_solid_min_thickness = 0 bridge_acceleration = 0 bridge_angle = 0 bridge_flow_ratio = 1 -bridge_speed = 0 +bridge_speed = 65 brim_width = 0 clip_multipart_objects = 0 compatible_printers = @@ -15,7 +15,7 @@ complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 -elefant_foot_compensation = 0 +elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 75% @@ -41,7 +41,7 @@ infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 0 +infill_speed = 65 inherits = interface_shells = 0 layer_height = 0.2 @@ -56,7 +56,7 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 0 +perimeter_speed = 65 perimeters = 2 post_process = print_settings_id = @@ -73,7 +73,7 @@ solid_infill_below_area = 50 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 0 +solid_infill_speed = 80% spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -91,7 +91,7 @@ support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 -support_material_speed = 0 +support_material_speed = 65 support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 1 diff --git a/print/prusa_i3_JB-h03.ini b/print/prusa_i3_JB-h03.ini index c38b7a5..5d23aee 100644 --- a/print/prusa_i3_JB-h03.ini +++ b/print/prusa_i3_JB-h03.ini @@ -1,4 +1,4 @@ -# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:03:56 UTC +# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:22:01 UTC avoid_crossing_perimeters = 0 bottom_fill_pattern = rectilinear bottom_solid_layers = 2 @@ -6,7 +6,7 @@ bottom_solid_min_thickness = 0 bridge_acceleration = 0 bridge_angle = 0 bridge_flow_ratio = 1 -bridge_speed = 0 +bridge_speed = 65 brim_width = 0 clip_multipart_objects = 0 compatible_printers = @@ -15,7 +15,7 @@ complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 draft_shield = 0 -elefant_foot_compensation = 0 +elefant_foot_compensation = 0.2 ensure_vertical_shell_thickness = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 75% @@ -41,7 +41,7 @@ infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 0 +infill_speed = 65 inherits = interface_shells = 0 layer_height = 0.3 @@ -56,7 +56,7 @@ overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 0 +perimeter_speed = 65 perimeters = 2 post_process = print_settings_id = @@ -73,7 +73,7 @@ solid_infill_below_area = 50 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 0 +solid_infill_speed = 80% spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 @@ -91,7 +91,7 @@ support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 -support_material_speed = 0 +support_material_speed = 65 support_material_synchronize_layers = 0 support_material_threshold = 0 support_material_with_sheath = 1