diff --git a/filament/DasFilament-PLA-black-3.00.ini b/filament/DasFilament-PLA-black-3.00.ini
index 822531d..249841d 100644
--- a/filament/DasFilament-PLA-black-3.00.ini
+++ b/filament/DasFilament-PLA-black-3.00.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:23 UTC
+# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:37:18 UTC
 bed_temperature = 0
 bridge_fan_speed = 100
 compatible_printers = 
@@ -10,7 +10,7 @@ disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
 fan_always_on = 0
-fan_below_layer_time = 30
+fan_below_layer_time = 60
 filament_colour = #000000
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
@@ -50,6 +50,6 @@ inherits =
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 10
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 5
 start_filament_gcode = "; Filament gcode\n"
 temperature = 200
diff --git a/filament/DasFilament-PLA-red-3.00.ini b/filament/DasFilament-PLA-red-3.00.ini
index 6965cc0..f067f00 100644
--- a/filament/DasFilament-PLA-red-3.00.ini
+++ b/filament/DasFilament-PLA-red-3.00.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:05:20 UTC
+# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:37:11 UTC
 bed_temperature = 0
 bridge_fan_speed = 100
 compatible_printers = 
@@ -10,7 +10,7 @@ disable_fan_first_layers = 3
 end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
 fan_always_on = 0
-fan_below_layer_time = 30
+fan_below_layer_time = 60
 filament_colour = #FB0207
 filament_cooling_final_speed = 3.4
 filament_cooling_initial_speed = 2.2
@@ -50,6 +50,6 @@ inherits =
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 10
-slowdown_below_layer_time = 10
+slowdown_below_layer_time = 5
 start_filament_gcode = "; Filament gcode\n"
 temperature = 200
diff --git a/print/prusa_i3_JB-h02.ini b/print/prusa_i3_JB-h02.ini
index f84dbc3..2ca833e 100644
--- a/print/prusa_i3_JB-h02.ini
+++ b/print/prusa_i3_JB-h02.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:03:59 UTC
+# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:35:27 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -6,7 +6,7 @@ bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
 bridge_flow_ratio = 1
-bridge_speed = 0
+bridge_speed = 65
 brim_width = 0
 clip_multipart_objects = 0
 compatible_printers = 
@@ -15,7 +15,7 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 draft_shield = 0
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 75%
@@ -41,7 +41,7 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 0
+infill_speed = 65
 inherits = 
 interface_shells = 0
 layer_height = 0.2
@@ -56,7 +56,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 0
+perimeter_speed = 65
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -73,7 +73,7 @@ solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 0
+solid_infill_speed = 80%
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -91,7 +91,7 @@ support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
-support_material_speed = 0
+support_material_speed = 65
 support_material_synchronize_layers = 0
 support_material_threshold = 0
 support_material_with_sheath = 1
diff --git a/print/prusa_i3_JB-h03.ini b/print/prusa_i3_JB-h03.ini
index c38b7a5..5d23aee 100644
--- a/print/prusa_i3_JB-h03.ini
+++ b/print/prusa_i3_JB-h03.ini
@@ -1,4 +1,4 @@
-# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:03:56 UTC
+# generated by PrusaSlicer 2.2.0+ on 2020-07-01 at 19:22:01 UTC
 avoid_crossing_perimeters = 0
 bottom_fill_pattern = rectilinear
 bottom_solid_layers = 2
@@ -6,7 +6,7 @@ bottom_solid_min_thickness = 0
 bridge_acceleration = 0
 bridge_angle = 0
 bridge_flow_ratio = 1
-bridge_speed = 0
+bridge_speed = 65
 brim_width = 0
 clip_multipart_objects = 0
 compatible_printers = 
@@ -15,7 +15,7 @@ complete_objects = 0
 default_acceleration = 0
 dont_support_bridges = 1
 draft_shield = 0
-elefant_foot_compensation = 0
+elefant_foot_compensation = 0.2
 ensure_vertical_shell_thickness = 1
 external_perimeter_extrusion_width = 0
 external_perimeter_speed = 75%
@@ -41,7 +41,7 @@ infill_extrusion_width = 0
 infill_first = 0
 infill_only_where_needed = 0
 infill_overlap = 25%
-infill_speed = 0
+infill_speed = 65
 inherits = 
 interface_shells = 0
 layer_height = 0.3
@@ -56,7 +56,7 @@ overhangs = 1
 perimeter_acceleration = 0
 perimeter_extruder = 1
 perimeter_extrusion_width = 0
-perimeter_speed = 0
+perimeter_speed = 65
 perimeters = 2
 post_process = 
 print_settings_id = 
@@ -73,7 +73,7 @@ solid_infill_below_area = 50
 solid_infill_every_layers = 0
 solid_infill_extruder = 1
 solid_infill_extrusion_width = 0
-solid_infill_speed = 0
+solid_infill_speed = 80%
 spiral_vase = 0
 standby_temperature_delta = -5
 support_material = 0
@@ -91,7 +91,7 @@ support_material_interface_spacing = 0
 support_material_interface_speed = 100%
 support_material_pattern = rectilinear
 support_material_spacing = 2.5
-support_material_speed = 0
+support_material_speed = 65
 support_material_synchronize_layers = 0
 support_material_threshold = 0
 support_material_with_sheath = 1