# generated by Slic3r 1.2.9 on Mon Sep 14 17:02:13 2015 avoid_crossing_perimeters = 0 bottom_solid_layers = 2 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 50 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 external_perimeter_speed = 50% external_perimeters_first = 0 extra_perimeters = 1 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0 fill_angle = 45 fill_density = 30% fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 0 first_layer_height = 0.4 first_layer_speed = 65% gap_fill_speed = 10 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 150% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 0 infill_speed = 80 interface_shells = 0 layer_height = 0.3 max_print_speed = 70 max_volumetric_speed = 0 min_skirt_length = 2 notes = only_retract_when_crossing_perimeters = 1 ooze_prevention = 0 output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 50 perimeters = 3 post_process = raft_layers = 0 resolution = 0 seam_position = aligned skirt_distance = 5 skirt_height = 1 skirts = 1 small_perimeter_speed = 15 solid_infill_below_area = 50 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 125% solid_infill_speed = 60 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 2.5 support_material_speed = 0 support_material_threshold = 0 thin_walls = 1 threads = 4 top_infill_extrusion_width = 90% top_solid_infill_speed = 80% top_solid_layers = 3 travel_speed = 50 xy_size_compensation = 0