# generated by Slic3r 1.3.1-dev on 2019-06-06 15:38:07 adaptive_slicing = 0 adaptive_slicing_quality = 75% avoid_crossing_perimeters = 0 bottom_infill_pattern = rectilinear bottom_solid_layers = 2 bridge_acceleration = 0 bridge_flow_ratio = 1 bridge_speed = 0 brim_connections_width = 0 brim_width = 0 compatible_printers = complete_objects = 1 default_acceleration = 0 dont_support_bridges = 1 external_perimeter_extrusion_width = 0 external_perimeter_speed = 75% external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 18 extruder_clearance_radius = 15 extrusion_width = 0 fill_angle = 45 fill_density = 30% fill_gaps = 1 fill_pattern = rectilinear first_layer_acceleration = 0 first_layer_extrusion_width = 150% first_layer_height = 0.3 first_layer_speed = 75% gap_fill_speed = 0 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 150% infill_first = 0 infill_only_where_needed = 0 infill_overlap = 0 infill_speed = 0 interface_shells = 0 interior_brim_width = 0 label_printed_objects = 0 layer_height = 0.2 match_horizontal_surfaces = 0 max_print_speed = 70 max_volumetric_speed = 16 min_shell_thickness = 0 min_skirt_length = 3 min_top_bottom_shell_thickness = 0 notes = 16 mm3/s and 70 mm/s is too much\n- lowered max speed from 70 to 60, volumetric from 16 to 14 + faster top solid from 50% to 75%\n- first layer is now very slow -> increase first layer speed from 50% to 75%\n- back to start, 16mm3/s, 70mm/s max; first layer 75%, top solid 75% -> ok with RDDRONE Top Case only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode overhangs = 1 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 perimeter_speed = 35 perimeters = 2 post_process = print_settings_id = raft_layers = 0 regions_overlap = 0 resolution = 0 seam_position = aligned shortcuts = complete_objects;fill_density;fill_pattern;adaptive_slicing_quality;layer_height;seam_position;spiral_vase;adaptive_slicing;dont_support_bridges;support_material;raft_layers;support_material_buildplate_only skirt_distance = 5 skirt_height = 1 skirts = 1 small_perimeter_speed = 35% solid_infill_below_area = 50 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 125% solid_infill_speed = 0 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_buildplate_only = 0 support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0 support_material_interface_extruder = 1 support_material_interface_extrusion_width = 0 support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_max_layers = 0 support_material_pattern = rectilinear support_material_pillar_size = 2.5 support_material_pillar_spacing = 10 support_material_spacing = 2.5 support_material_speed = 0 support_material_threshold = 60% thin_walls = 1 top_infill_extrusion_width = 0 top_infill_pattern = rectilinear top_solid_infill_speed = 75% top_solid_layers = 3 travel_speed = 100 xy_size_compensation = 0