slic3r: new settings with v1.3 beta - more speed

.gitignore

@@ -1,3 +1,4 @@
 /*exclude
 
 reprap-projekt Rechnungen
+_octoprint

README.md

@@ -21,8 +21,9 @@ These are the settings and tests I use for my reprap prusa i3 build.
 - extruder/ hotend
   - 3mm filament
   - J-Head
-  - Greg´s Wade Extruder (currently installing a new generation)
+  - Greg´s Wade Extruder
-  - currently installing a new layer fan
+  - Layer fan
+- OctoPrint on Rapberry Pi 2B
 
 
 ## location of settings files
@@ -35,39 +36,3 @@ These are the settings and tests I use for my reprap prusa i3 build.
 - Slic3r: 
 - printrun:
 
-
-----
-
-## checklists
-first idea - to be further enhanced
-
-### turning the printer on
-- check the repository for new (slic3r) settings
-- connect USB
-- open pronterface
-- click "connect" in printrun
-- connect mains power
-- click "setPP" to give initial position
-- check fan position
-- if not stored in parking position:
-	- home X-axis
-	- home Y-axis
-	- set zero point of Z-axis
-- check endstops
-- check belt tension
-
-### pre print check
-- turn on heat to 190°C
-- clean hotend nozzle
-- click "goStartPos"
-- extrude some filament until steady stream
-- clean hotend nozzle
-- start print
-
-### turning the printer off
-- turn heat off
-- click "goParkPos" to move to storing position
-- click "Motors off"
-- click "disconnect" in printrun
-- disconnect mains power
-- disconnect USB

Slic3r-Settings/filament/-black-bedOff.ini

@@ -1,17 +1,25 @@
-# generated by Slic3r 1.2.9 on Sat Feb  6 18:38:59 2016
+# generated by Slic3r 1.3.1-dev on 2018-10-07 12:15:10
 bed_temperature = 0
 bridge_fan_speed = 100
+compatible_printers = 
 cooling = 1
 disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 30
 filament_colour = #000000
-filament_diameter = 2.85
+filament_cost = 0
+filament_density = 0
+filament_diameter = 2.9
+filament_max_volumetric_speed = 0
+filament_notes = ""
+filament_settings_id = 
 first_layer_bed_temperature = 0
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 30
 min_print_speed = 10
 slowdown_below_layer_time = 20
+start_filament_gcode = "; Filament gcode\n"
 temperature = 200

Slic3r-Settings/print/prusa_auto-h03f15.ini

@@ -0,0 +1,104 @@
+# generated by Slic3r 1.3.1-dev on 2018-10-20 18:19:25
+adaptive_slicing = 0
+adaptive_slicing_quality = 75%
+avoid_crossing_perimeters = 0
+bottom_infill_pattern = rectilinear
+bottom_solid_layers = 2
+bridge_acceleration = 0
+bridge_flow_ratio = 1
+bridge_speed = 0
+brim_connections_width = 0
+brim_width = 0
+compatible_printers = 
+complete_objects = 1
+default_acceleration = 0
+dont_support_bridges = 1
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 18
+extruder_clearance_radius = 15
+extrusion_width = 0
+fill_angle = 45
+fill_density = 15%
+fill_gaps = 1
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.3
+first_layer_speed = 40
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 150%
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 0
+interface_shells = 0
+interior_brim_width = 0
+label_printed_objects = 0
+layer_height = 0.3
+match_horizontal_surfaces = 0
+max_print_speed = 80
+max_volumetric_speed = 40
+min_shell_thickness = 0
+min_skirt_length = 3
+min_top_bottom_shell_thickness = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 0
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+regions_overlap = 0
+resolution = 0
+seam_position = aligned
+shortcuts = complete_objects;fill_density;fill_pattern;seam_position;spiral_vase;adaptive_slicing;support_material
+skirt_distance = 5
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 25%
+solid_infill_below_area = 50
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 125%
+solid_infill_speed = 0
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_extrusion_width = 0
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_max_layers = 0
+support_material_pattern = rectilinear
+support_material_pillar_size = 2.5
+support_material_pillar_spacing = 10
+support_material_spacing = 2.5
+support_material_speed = 0
+support_material_threshold = 60%
+thin_walls = 1
+top_infill_extrusion_width = 0
+top_infill_pattern = rectilinear
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0

Slic3r-Settings/printer/-prusa-powerOff-extra.ini

@@ -1,20 +1,20 @@
-# generated by Slic3r 1.2.9 on Mon Sep 14 11:36:06 2015
+# generated by Slic3r 1.2.9 on Sun Oct  7 13:15:59 2018
 bed_shape = 7x10,187x10,187x190,7x190
 before_layer_gcode = 
-end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
+end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
 extruder_offset = 0x0
 gcode_flavor = reprap
 layer_gcode = 
 nozzle_diameter = 0.4
 octoprint_apikey = 
-octoprint_host = 
+octoprint_host = octoprusa.iot-fra80
 pressure_advance = 0
-retract_before_travel = 2
+retract_before_travel = 1
 retract_layer_change = 1
 retract_length = 1
 retract_length_toolchange = 10
 retract_lift = 0
-retract_restart_extra = 0.1
+retract_restart_extra = 0.05
 retract_restart_extra_toolchange = 0
 retract_speed = 7
 start_gcode = G1 F2000 X50 Y100 Z5; start pos

Slic3r-Settings/printer/-prusa.ini

@@ -1,27 +1,41 @@
-# generated by Slic3r 1.2.9 on Sun Jun  5 14:05:39 2016
+# generated by Slic3r 1.3.1-dev on 2018-10-07 12:29:57
 bed_shape = 5x0,195x0,195x190,5x190
 before_layer_gcode = 
+between_objects_gcode = 
 end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
 extruder_offset = 0x0
 gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
 layer_gcode = 
+max_layer_height = 0.4
+min_layer_height = 0.2
 nozzle_diameter = 0.4
+octoprint_host = octoprusa.iot-fra80
 octoprint_apikey = 
-octoprint_host = 
 pressure_advance = 0
+printer_notes = 
+printer_settings_id = 
 retract_before_travel = 1
 retract_layer_change = 1
 retract_length = 1
 retract_length_toolchange = 10
 retract_lift = 0
-retract_restart_extra = 0.05
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
 retract_restart_extra_toolchange = 0
 retract_speed = 7
+serial_port = 
+serial_speed = 250000
 start_gcode = G1 F2000 X50 Y100 Z5; start pos
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
 use_volumetric_e = 0
 vibration_limit = 0
 wipe = 0
 z_offset = 0
+z_steps_per_mm = 0

Slic3r-Settings/slic3r.ini

@@ -1,21 +1,33 @@
-# generated by Slic3r 1.2.9 on Sat Feb  6 19:55:18 2016
+# generated by Slic3r 1.3.1-dev on Sat Oct 20 20:31:31 2018
+autoalignz = 1
 autocenter = 
 background_processing = 1
+color_toolpaths_by = role
+invert_zoom = 0
 last_output_path = /Users/jannik/Desktop
-last_version_check = 1454779142
+last_version_check = 1538910032
 main_frame_maximized = 
-main_frame_pos = 0,23
+main_frame_pos = 575,-157
-main_frame_size = 1050,832
+main_frame_size = 1291,836
-mode = expert
+nudge_val = 1
+reload_behavior = 0
+reload_hide_dialog = 0
 remember_output_path = 1
-version = 1.2.9
+show_host = 0
+tabbed_preset_editors = 1
+threads = 4
+version = 1.3.1-dev
 version_check = 1
 
+[octoprint]
+overwrite = 1
+start = 
+
 [presets]
-filament = -black-bedOff.ini
+filament = -blue-bedOff
-print = -prusa-h03f15.ini
+print = prusa_auto-h03f15
-printer = -prusa.ini
+printer = -prusa
 
 [recent]
 config_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3
-skein_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3/printTests
+skein_directory = /Users/jannik/JBeyerstedt-Projekte/freecad/esp32-sensornode-case