1
0
Fork 0

slic3r: new settings with v1.3 beta - more speed

master
Jannik Beyerstedt 4 years ago
parent 37f2f38707
commit b0af0679ed

1
.gitignore vendored

@ -1,3 +1,4 @@
/*exclude
reprap-projekt Rechnungen
_octoprint

@ -21,8 +21,9 @@ These are the settings and tests I use for my reprap prusa i3 build.
- extruder/ hotend
- 3mm filament
- J-Head
- Greg´s Wade Extruder (currently installing a new generation)
- currently installing a new layer fan
- Greg´s Wade Extruder
- Layer fan
- OctoPrint on Rapberry Pi 2B
## location of settings files
@ -35,39 +36,3 @@ These are the settings and tests I use for my reprap prusa i3 build.
- Slic3r:
- printrun:
----
## checklists
first idea - to be further enhanced
### turning the printer on
- check the repository for new (slic3r) settings
- connect USB
- open pronterface
- click "connect" in printrun
- connect mains power
- click "setPP" to give initial position
- check fan position
- if not stored in parking position:
- home X-axis
- home Y-axis
- set zero point of Z-axis
- check endstops
- check belt tension
### pre print check
- turn on heat to 190°C
- clean hotend nozzle
- click "goStartPos"
- extrude some filament until steady stream
- clean hotend nozzle
- start print
### turning the printer off
- turn heat off
- click "goParkPos" to move to storing position
- click "Motors off"
- click "disconnect" in printrun
- disconnect mains power
- disconnect USB

@ -1,17 +1,25 @@
# generated by Slic3r 1.2.9 on Sat Feb 6 18:38:59 2016
# generated by Slic3r 1.3.1-dev on 2018-10-07 12:15:10
bed_temperature = 0
bridge_fan_speed = 100
compatible_printers =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 30
filament_colour = #000000
filament_diameter = 2.85
filament_cost = 0
filament_density = 0
filament_diameter = 2.9
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 0
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 30
min_print_speed = 10
slowdown_below_layer_time = 20
start_filament_gcode = "; Filament gcode\n"
temperature = 200

@ -0,0 +1,104 @@
# generated by Slic3r 1.3.1-dev on 2018-10-20 18:19:25
adaptive_slicing = 0
adaptive_slicing_quality = 75%
avoid_crossing_perimeters = 0
bottom_infill_pattern = rectilinear
bottom_solid_layers = 2
bridge_acceleration = 0
bridge_flow_ratio = 1
bridge_speed = 0
brim_connections_width = 0
brim_width = 0
compatible_printers =
complete_objects = 1
default_acceleration = 0
dont_support_bridges = 1
external_perimeter_extrusion_width = 0
external_perimeter_speed = 40
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 18
extruder_clearance_radius = 15
extrusion_width = 0
fill_angle = 45
fill_density = 15%
fill_gaps = 1
fill_pattern = honeycomb
first_layer_acceleration = 0
first_layer_extrusion_width = 0
first_layer_height = 0.3
first_layer_speed = 40
gap_fill_speed = 0
gcode_comments = 0
infill_acceleration = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 150%
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 0
infill_speed = 0
interface_shells = 0
interior_brim_width = 0
label_printed_objects = 0
layer_height = 0.3
match_horizontal_surfaces = 0
max_print_speed = 80
max_volumetric_speed = 40
min_shell_thickness = 0
min_skirt_length = 3
min_top_bottom_shell_thickness = 0
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base]--h[layer_height]f[fill_density].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 0
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
regions_overlap = 0
resolution = 0
seam_position = aligned
shortcuts = complete_objects;fill_density;fill_pattern;seam_position;spiral_vase;adaptive_slicing;support_material
skirt_distance = 5
skirt_height = 1
skirts = 1
small_perimeter_speed = 25%
solid_infill_below_area = 50
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 125%
solid_infill_speed = 0
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_extrusion_width = 0
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_max_layers = 0
support_material_pattern = rectilinear
support_material_pillar_size = 2.5
support_material_pillar_spacing = 10
support_material_spacing = 2.5
support_material_speed = 0
support_material_threshold = 60%
thin_walls = 1
top_infill_extrusion_width = 0
top_infill_pattern = rectilinear
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 100
xy_size_compensation = 0

@ -1,20 +1,20 @@
# generated by Slic3r 1.2.9 on Mon Sep 14 11:36:06 2015
# generated by Slic3r 1.2.9 on Sun Oct 7 13:15:59 2018
bed_shape = 7x10,187x10,187x190,7x190
before_layer_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y195\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S0 ;temp off\nM84 ;motors off\nM81 ;Power off
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode =
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
octoprint_host = octoprusa.iot-fra80
pressure_advance = 0
retract_before_travel = 2
retract_before_travel = 1
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.1
retract_restart_extra = 0.05
retract_restart_extra_toolchange = 0
retract_speed = 7
start_gcode = G1 F2000 X50 Y100 Z5; start pos

@ -1,27 +1,41 @@
# generated by Slic3r 1.2.9 on Sun Jun 5 14:05:39 2016
# generated by Slic3r 1.3.1-dev on 2018-10-07 12:29:57
bed_shape = 5x0,195x0,195x190,5x190
before_layer_gcode =
between_objects_gcode =
end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
extruder_offset = 0x0
gcode_flavor = reprap
has_heatbed = 1
host_type = octoprint
layer_gcode =
max_layer_height = 0.4
min_layer_height = 0.2
nozzle_diameter = 0.4
octoprint_host = octoprusa.iot-fra80
octoprint_apikey =
octoprint_host =
pressure_advance = 0
printer_notes =
printer_settings_id =
retract_before_travel = 1
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0.05
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 7
serial_port =
serial_speed = 250000
start_gcode = G1 F2000 X50 Y100 Z5; start pos
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 0
use_set_and_wait_bed = 0
use_set_and_wait_extruder = 0
use_volumetric_e = 0
vibration_limit = 0
wipe = 0
z_offset = 0
z_steps_per_mm = 0

@ -1,21 +1,33 @@
# generated by Slic3r 1.2.9 on Sat Feb 6 19:55:18 2016
# generated by Slic3r 1.3.1-dev on Sat Oct 20 20:31:31 2018
autoalignz = 1
autocenter =
background_processing = 1
color_toolpaths_by = role
invert_zoom = 0
last_output_path = /Users/jannik/Desktop
last_version_check = 1454779142
last_version_check = 1538910032
main_frame_maximized =
main_frame_pos = 0,23
main_frame_size = 1050,832
mode = expert
main_frame_pos = 575,-157
main_frame_size = 1291,836
nudge_val = 1
reload_behavior = 0
reload_hide_dialog = 0
remember_output_path = 1
version = 1.2.9
show_host = 0
tabbed_preset_editors = 1
threads = 4
version = 1.3.1-dev
version_check = 1
[octoprint]
overwrite = 1
start =
[presets]
filament = -black-bedOff.ini
print = -prusa-h03f15.ini
printer = -prusa.ini
filament = -blue-bedOff
print = prusa_auto-h03f15
printer = -prusa
[recent]
config_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3
skein_directory = /Users/jannik/JBeyerstedt-Projekte/reprap-prusa-i3/printTests
skein_directory = /Users/jannik/JBeyerstedt-Projekte/freecad/esp32-sensornode-case