From 9d0e028ae53d91d10de3b25e2b8dec33fa6c304e Mon Sep 17 00:00:00 2001
From: Jannik Beyerstedt <code@jannikbeyerstedt.de>
Date: Wed, 18 Mar 2020 16:47:47 +0100
Subject: [PATCH] slic3r: add printer profile for octolapse

---
 Slic3r-Settings/printer/-prusa-octolapse.ini | 41 ++++++++++++++++++++
 Slic3r-Settings/printer/-prusa-timelapse.ini |  2 +-
 2 files changed, 42 insertions(+), 1 deletion(-)
 create mode 100644 Slic3r-Settings/printer/-prusa-octolapse.ini

diff --git a/Slic3r-Settings/printer/-prusa-octolapse.ini b/Slic3r-Settings/printer/-prusa-octolapse.ini
new file mode 100644
index 0000000..fa57651
--- /dev/null
+++ b/Slic3r-Settings/printer/-prusa-octolapse.ini
@@ -0,0 +1,41 @@
+# generated by Slic3r 1.3.1-dev on 2020-03-18 15:46:09
+bed_shape = 5x0,195x0,195x190,5x190
+before_layer_gcode = 
+between_objects_gcode = 
+end_gcode = G91 ;rel Pos\nG0 Z20\nG90 ;abs Pos\nG1 F3000 X190 Y190\n\nM104 S145 ;temp lower
+extruder_offset = 0x0
+gcode_flavor = reprap
+has_heatbed = 1
+host_type = octoprint
+layer_gcode = G4 P500; wait 500ms, trigger octolapse
+max_layer_height = 0.4
+min_layer_height = 0.2
+nozzle_diameter = 0.4
+octoprint_apikey = 
+pressure_advance = 0
+print_host = octoprusa.fra80
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 7
+serial_port = 
+serial_speed = 250000
+start_gcode = G92 O ; pseudo gcode for octolapse homing\nG1 F2000 X50 Y100 Z5; start pos
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_set_and_wait_bed = 0
+use_set_and_wait_extruder = 0
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+z_steps_per_mm = 0
diff --git a/Slic3r-Settings/printer/-prusa-timelapse.ini b/Slic3r-Settings/printer/-prusa-timelapse.ini
index c5ec5d2..92d898b 100644
--- a/Slic3r-Settings/printer/-prusa-timelapse.ini
+++ b/Slic3r-Settings/printer/-prusa-timelapse.ini
@@ -28,7 +28,7 @@ retract_restart_extra_toolchange = 0
 retract_speed = 7
 serial_port = 
 serial_speed = 250000
-start_gcode = G1 F2000 X50 Y100 Z5; start pos
+start_gcode = G92 O ; pseudo gcode for octolapse homing\nG1 F2000 X50 Y100 Z5; start pos
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 0