esp8266-sensornode/esp8266-sensornode.ino

/*
   ESP8266 Environmental si7021s Node

   copyright: Jannik Beyerstedt | http://jannikbeyerstedt.de | code@jannikbeyerstedt.de
   license: http://www.gnu.org/licenses/gpl-3.0.txt GPLv3 License
*/

#include <ESP8266WiFi.h>
#include <WiFiClient.h>
#include <Wire.h>
#include "Adafruit_Si7021.h"
extern "C" {
#include "user_interface.h"
}

#define DEBUG /* enable Serial debugging */
#define TEST  /* use test config and database */

#define HUZZAH 1 /* Adafruit Feather HUZZAH */
#define LOLIN 2  /* LoLin NodeMCU */
#define ESP07S 3 /* standalone ESP07S */
#define BOARD 1  /* choose from above */

#define NODENAME "env-huzzah-01" /* IMPORTANT: CHANGE FOR EACH DEVICE */
//#define NODENAME "env-esp07-01"  /* IMPORTANT: CHANGE FOR EACH DEVICE */

/* SETTINGS */
#ifdef TEST
String       loggerName       = "esp-test";
unsigned int sendInterval_sec = 180; /* 180 sec (3 min) */
#else
String       loggerName       = NODENAME;
unsigned int sendInterval_sec = 1800; /* 1800 sec (30 min) */
#endif
//IPAddress ip(192, 168, 50, 5);      /* IMPORTANT: CHANGE FOR EACH DEVICE */
IPAddress gate(192, 168, 50, 1);
IPAddress subn(255, 255, 255, 0);
float     tempOffset = -1.0;
float     humiOffset = -10.0;

const char* host = "ursaminor.fra80";
#ifdef TEST
String serviceUri = "/write?db=test";
#else
String       serviceUri       = "/write?db=sensors";
#endif
const int httpPort = 8086;

#if BOARD == LOLIN
#define BATT_FULL 2812
#define BATT_CUTOFF 2280
#elif BOARD == HUZZAH
#define BATT_FULL 3100
#define BATT_CUTOFF 2450 /* 2500=3,0V; 3080=4,0V (Battery Voltage!!!) */
#elif BOARD == ESP07S
#define BATT_FULL 3250
#define BATT_CUTOFF 2450 /* 2450=2,7V; 3200=3,5V (VCC Voltage) */
#endif

/* GLOBAL VARIABLES */
const unsigned int wifiConnectTimeout = 30; /* num of 500ms intervals */

Adafruit_Si7021 si7021 = Adafruit_Si7021();
float           temp;
float           humi;

ADC_MODE(ADC_VCC);  // set the ADC to read VCC

#ifdef DEBUG
#define PRINT(x) Serial.print(x)
#define PRINTLN(x) Serial.println(x)
#else
#define PRINT(x)
#define PRINTLN(x)
#endif

bool wifiConnect(void) {
  unsigned int cycles = 0;

  PRINTLN("INFO Connecting to WiFi");
  WiFi.mode(WIFI_STA);
  WiFi.begin("WLAN-Bey-IoT", "IoT-Fra80");
  //WiFi.config(ip, gate, subn); // use a static ip for faster connect
  while (WiFi.status() != WL_CONNECTED) {
    delay(500);
    PRINT(".");  // log level: DEBUG

    cycles++;
    if (cycles > wifiConnectTimeout) {
      PRINTLN(" FAILED");
      return false;
    }
  }
  PRINT(" ok, IP: ");  // log level: DEBUG
  PRINTLN(WiFi.localIP());
  return true;
}

void setup() {
#ifdef DEBUG
  Serial.begin(115200);
  delay(100);
  Serial.println("");
  Serial.print("Node ");
  Serial.print(loggerName);
  Serial.print(", BoardType: ");
  Serial.println(BOARD);
#endif

  WiFi.mode(WIFI_OFF);
  WiFi.forceSleepBegin();

  si7021.begin();
  pinMode(0, OUTPUT);

  /* GET VALUE SAMPLES */
  humi = si7021.readHumidity() + humiOffset;
  temp = si7021.readTemperature() + tempOffset;
#ifdef DEBUG
  Serial.print("> Humidity: ");
  Serial.print(humi, 2);
  Serial.print("\tTemperature: ");
  Serial.println(temp, 2);
#endif

  /* WRITE VALUES TO DATABASE */
  // turn wifi on again
  PRINTLN("DEBUG turning wifi on again");
  WiFi.forceSleepWake();
  if (!wifiConnect()) {
    return;
  }

  uint16_t battLevel = ESP.getVcc();
  float    battPerc  = 100.0 * (battLevel - BATT_CUTOFF) / (BATT_FULL - BATT_CUTOFF);
  Serial.print("Bat: ");
  Serial.print(battLevel);
  Serial.print(", ");
  Serial.print(battPerc);
  Serial.println("%");

  // send data to influxdb
  String influxDataLine = "weather,sensor=" + loggerName + " temp=" + String(temp, 2);
  influxDataLine += ",hum=" + String(humi, 2);
  influxDataLine += ",batRaw=" + String(battLevel);
  influxDataLine += ",bat=" + String(battPerc);

  PRINT("INFO connecting to ");
  PRINT(host);
  WiFiClient client;
  if (client.connect(host, httpPort)) {
    PRINTLN(" > success");  // log level: INFO

    String httpRequest = "POST " + serviceUri + " HTTP/1.1\r\n" + "Host: " + host + ":" + httpPort + "\r\n" +
                         "Content-Length: " + influxDataLine.length() + "\r\n" +
                         "Authorization: Basic c2Vuc29yczpTZW5zb3JzLXcuaW5mbHV4QGhvbWU=\r\n" +
                         "Connection: close\r\n" + "\r\n" + influxDataLine + "\r\n";
    client.print(httpRequest);
    delay(100);

    while (client.available()) {
      String line = client.readStringUntil('\n');
      if (line.indexOf("HTTP") != -1) {
        if (line.indexOf("204") == -1) {  // expect a HTTP 204 status code
          PRINTLN("ERROR: invalid http status code");
          PRINTLN(line);
        }
        break;
      } else {
        ;
      }
    }

  } else {
    PRINTLN(" > FAILED");
  }
  client.stop();
  /* SAVE EVEN MORE ENERGY, WAIT IN DEEP SLEEP */
  PRINTLN("DEBUG going to deep sleep now");
  ESP.deepSleep(sendInterval_sec * 1000000, WAKE_RF_DEFAULT);
  delay(100);
}

void loop() {
  /* WIFI CONNECT FAILED, WAIT 5 MINUTES IN DEEP SLEEP */
  PRINTLN("DEBUG going to deep sleep now");
  if (sendInterval_sec > (5 * 60)) {
    ESP.deepSleep(5 * 60 * 1000000, WAKE_RF_DEFAULT);
  } else {
    ESP.deepSleep(sendInterval_sec * 1000000, WAKE_RF_DEFAULT);
  }
  delay(100);
}