Readme

Author: Jannik Beyerstedt
license: GNU GPL v3

Dependencies

Prepare toolchain (macOS):

cd ~/JBeyerstedt-Projekte/
mkdir ./esp32
cd esp32
curl https://dl.espressif.com/dl/xtensa-esp32-elf-osx-1.22.0-80-g6c4433a-5.2.0.tar.gz -o xtensa-esp32-elf-osx-1.22.0-80-g6c4433a-5.2.0.tar.gz
tar -xzf xtensa-esp32-elf-osx-1.22.0-80-g6c4433a-5.2.0.tar.gz
rm xtensa-esp32-elf-osx-1.22.0-80-g6c4433a-5.2.0.tar.gz

Prepare toolchain (Debian, Ubuntu) (ubuntu devel vm):

sudo apt-get install git wget make libncurses-dev flex bison gperf python python-serial

cd ~/Development/
mkdir ./esp32
cd esp32
wget https://dl.espressif.com/dl/xtensa-esp32-elf-linux64-1.22.0-73-ge28a011-5.2.0.tar.gz
tar -xzf xtensa-esp32-elf-linux64-1.22.0-73-ge28a011-5.2.0.tar.gz
rm xtensa-esp32-elf-linux64-1.22.0-73-ge28a011-5.2.0.tar.gz

Add to your bash profile, zshrc or other:

export PATH=$PATH:$HOME/JBeyerstedt-Projekte/esp32/xtensa-esp32-elf/bin
export IDF_PATH = $HOME/JBeyerstedt-Projekte/esp32/esp-idf

or for ubuntu devel vm:

export PATH=$PATH:$HOME/Development/esp32/xtensa-esp32-elf/bin
export IDF_PATH = $HOME/Development/esp32/esp-idf

Install esp-idf:

git clone --recursive https://github.com/espressif/esp-idf.git

Checkout this project and configure arduino-es32 with esp-idf:

TODO!!

mkdir -p components && \
cd components && \
git clone https://github.com/espressif/arduino-esp32.git arduino && \
cd arduino && \
git submodule update --init --recursive && \
cd ../..

Configure make menuconfig:

• under "Arduino Configuration":
  • "Autostart Arduino setup and loop on boot": off
  • "Disable mutex locks for HAL": off
• under "Serial flasher config":
  • change flash size to 4 MB
  • optionally set your serial port
• under "Component config" -> "ESP32-secific":
  • set CPU frequency to 80 MHz

Make and flash:

make all
make flash

You would probably have to adapt the UPLOAD_PORT in the Makefile or set it via an environment variable.