[DOC] reworked potentiometer options

[TIDY] restructure readme
2021-04-11 22:16:40 +02:00 · 2021-04-11 18:23:45 +02:00
1 changed files with 158 additions and 46 deletions
--- a/README.md
+++ b/README.md
@ -38,13 +38,16 @@ All inputs (besides the microphones) and outputs should:
 This results in a signal flow like this: ![](docs/signal-flow.jpg)


+
 ## Status

 ### Tasks
 - [x] Requirements collection
 - [x] Electrical design draft/ proof of concept (breadboard)
 - [x] Proof of concept validation
- [x] First PCB layout
+- [x] First PCB layout (prototyping modules)
+- [x] More testing/ validation
+- [ ] Second PCB layout + casing prototype
 - [ ] More testing/ validation

 Help is always appreciated!
@ -56,27 +59,28 @@ Help is always appreciated!
 - [x] Adjustable headphone mix and output volume
 - [ ] ESD protection and galvanic isolation of line inputs and outputs
 - [x] VU meter (own PCB)
+- [ ] VU meter (integrated in front panel PCB)
 - [ ] Mute and On-Air buttons


+
 ## Electrical Design
 This chapter contains some notes on the electrical design.
 Currently just the sources of the used circuit designs.


-### Sources and Design Considerations
-
-#### Microphone Input
-##### Preamplifier
+### Microphone Input
+#### Preamplifier
 For the microphone preamp, we are using the NE5534 low-noise opamp with a circuit design from [circuitlib microphone pre-amp](https://www.circuitlib.com/index.php/schematics/product/29-balanced-microphone-preamplifier).

-##### Controllable Amplification
+#### Controllable Amplification
 In a normal mixer, you would be able to lower the microphone's volume to zero.
 But in our case we just need on/ off and some gain range to adjust for different microphones and loudness of different people.

 TODO: Integrate the On-Air button with it's LEDs

-#### Line Input/ Input Module
+
+### Line Input/ Input Module
 The line input must not be amplified at all, because loudness control of the headphones is done by the headphone amplifier section.
 But the differential line-level signal must be converted to a single-ended signal by the input stage.

@ -85,7 +89,8 @@ The second part of that circuit was taken from the [circuitlib audio mixer tutor

 TODO: How to achieve galvanic isolation?

-#### Summing
+
+### Summing
 Summing is needed in two places: Creating the sum of all microphones (not adjustable, fixed output gain) and for the headphone mix (one input level adjustable).
 A simple summing circuit using one operational amplifier is enough for our application, like in [circuitlib audio mixer tutorial](https://www.circuitlib.com/index.php/tutorials/product/39-how-to-build-an-audio-mixer).

@ -95,47 +100,151 @@ In our case, there are just two types of summing: All microphones for the interp
 Because the stage input is quite independent of the interpreter's microphones, no special phase/ inversion considerations are needed.
 And the microphones connected to our unit will experience the same inversions anyways.

-#### Line Output Driver
+
+### Line Output Driver
 Line Output conversion is done by the [DRV134](https://www.ti.com/product/DRV134) IC.

 TODO: How to achieve galvanic isolation?

-#### Headphone Output Driver
+
+### Headphone Output Driver
 The headphone output needs a maximum output power of about 0.1 W and should put the mono signal on both stereo channels of the TRS jack.

 For the first draft, we're using one LM386 audio power amplifier even though it has a quite high minimal amplification of factor 20.

-#### VU Meter
+
+### VU Meter
 When searching for VU meter circuits, many use the LM3916 LED bar graph driver, which already has the right scaling built in.
 But this chip is obsolete and not produced any more, so we designed our own chain of comperators to drive a set of LEDs.

-#### User Interface Hardware
-After some long research to find single and dual channel, logarithmic scale potentiometers with the same dimensions, there are only a few options left:
-1. Alps Alpine Series RK09K/D, 10 kOhm (log), 15 mm length, vertical mount: RK09K1130AJ3 (single) and RK09K12C0A19 (dual)  
-6 mm D-style (4.5 mm) shaft, 6 mm flattened + 2.2 mm (incl. 0.8 mm collar) = 8.2 mm from top  
-Notes: Knob might touch surface, assuming 2 mm front plate thickness
-2. Alps Alpine Series RK09K/D, 10 kOhm (log), 30 mm length, vertical mount: RK09D117000C (single) and RK09K12C0A8K (dual)  
-6 mm D-style (4.5 mm) shaft, 12 mm flattened + 11.2 mm (incl. 5.0 mm collar) = 23.2 mm from top  
-Notes: Quite long shaft, matching knobs difficult to find
-3. **Alps Alpine Series RK097**, 10 kOhm (log), 15 mm length, horizontal mount: RK097111080J (single) and RK09712200MC (dual)  
-6 mm D-style (4.5 mm) shaft, 7 mm flattened + 8 mm (incl. 5 mm threaded collar) = 15 mm from top  
-Notes: More expensive than RK09K; Thread should fix 2 mm front plate well
-4. Alps Alpine Series RK097, 10 kOhm (log), 20 mm length, horizontal mount: RK097111080R (single) and RK09712200HA (dual)  
-6 mm D-style (4.5 mm) shaft, 12 mm flattened + 8 mm (incl. 7 mm threaded collar) = 20 mm from top  
-Notes: Quite long shaft, matching knobs difficult to find
+
+
+## User Interface
+The user interface should enable the interpereters to adjust their microphone gain and headphone mix on their own.
+Additionally, a (permanent) on/off switch, as well as a (temporary) mute button should be present.
+
+A possible UI layout might look like this: ![](docs/ui-layout.jpg)
+
+
+### Potentiometers
+We need some single and dual channel logarithmic scale potentiometers, which are matching in size, for:
+- top plate interface (all vertical style, threaded collar would be nice):
+    * 1 single channel for the input gain (resistance doesn't matter)
+    * 2 single and 1 stereo channel for the headphone mix (ideally 50K, b/c 3 will be in parallel)
+- front plate next to the headset jacks (horizontal style, threaded collar not needed):
+    * 1 single channel for the headphone volume (ideally 50K, b/c that's already tested)

 Possible knobs may be:
- Rean F311/ F313 series (11/ 13 mm diameter): 9 mm hole depth (no skirt/ flush with end of flatted axis section)  
-Notes: Will fit option 1 (and 2, if potentiometer placed accordingly)
- Rean P670 series (12 mm diameter/ 16 mm at bottom): 7.5 mm hole depth + 4.5 mm skirt = 12 mm  
-Notes: Should fit option 3
- Cliff K87MAR series/ RS Pro 777-73xx: 7.5 mm hole depth + 4.5 mm skirt = 12 mm, inner size of skirt 12 mm (measured)  
-Notes: Should fit option 3 (boring for potentiometer nut a bit tight); Size quite like Rean R670
- Rean P300 series (11 mm diameter/ 15 mm at bottom): 9 mm hole depth + 3 mm skirt
-Notes: Might also fit option 3
+- (A) Re'an F311/ F313 series (11/ 13 mm diameter) -- 0.40 €/ 0.55 €:  
+    Boring: 9.0 mm D-style hole + 0.0 mm nut cover section = 9.0 mm
+- (B) Re'an P670 series (12 mm diameter/ 16 mm at bottom) (alt. Davies Molding 1101) -- 0.78 €:  
+    Boring: 7.5 mm D-style hole + 4.5 mm nut cover section = 12.0 mm  
+    Nut cover: 12.9 mm diameter (M7 nut is 12.5 mm corner to corner)
+- (C) Re'an P300 series (11 mm diameter/ 15 mm at bottom):  
+    Boring: 9.0 mm D-style hole + 3.0 mm nut cover section = 12.0 mm  
+    Nut cover: ? mm diameter (M7 nut is 12.5 mm corner to corner)
+- ~~(D) Cliff K87MAR series/ RS Pro 777-73xx: 7.5 mm hole depth + 4.5 mm skirt = 12 mm, inner size of skirt 12 mm (measured)~~  
+~~Notes: D-style boring has wrong size (5 mm instead of 4.5 mm flatted)~~

-The On-Air button needs to be a latching SPST (or SPDT) switch with LED illumination, like:
+Potentiometers from Alps Alpine seem to have a decent quality in a small package size and quite affordable price.
+From their lineup, the RK09K/D, RK11/12/14, RK09L and RK097 series are left considering our requirements (mouser prices without VAT, shortlist marked bold):
+- Alps Alpine Series RK09K/D (6 mm D-style (4.5 mm) shaft):
+    * vertical (top plate):
+        + **single channel: 10K, 15 mm -- RK09K1130AJ3 -- 0.91 €**  
+            actual shaft length (dwg. 2): 7.4 mm (6 mm flattened)  
+            _matching knobs: A_
+        + dual channel: 10K, 15 mm -- RK09K12C0A19 -- 1.23 €  
+            actual shaft length (dwg. 10): 7.4 mm (6 mm flattened)  
+            _matching knobs: A_
+        + **dual channel: 50K, 20 mm -- RK09K12C0A2S -- 1.44 €**  
+            actual shaft length (dwg. 10): 12.4 mm (7 mm flattened)  
+            _matching knobs: C, B (depending on front plate thickness)_
+    * horizontal (front plate):
+        * single channel: 10K, 15 mm -- RK09K1110A2S -- 0.67 €  
+            actual shaft length (dwg. 1): 7.4 mm (6 mm flattened)  
+            _matching knobs: A_
+        * **single channel: 50K, 15 mm -- RK09K1110B1R -- 0.67 €**  
+            actual shaft length (dwg. 6): 7.4 mm (6 mm flattened)  
+            _matching knobs: A_
+- Alps Alpine Series RK11K/12L/14K (6 mm D-style (4.5 mm) shaft):
+    * vertical (top plate):
+        + single channel: none
+        + dual channel: 10K, 20 mm -- RK14K12C0A1S -- 1.17 €  
+            actual shaft length (dwg. 2): 11.8 mm (7 mm flattened)  
+            _matching knobs: C, B (depending on front plate thickness)_
+        + dual channel: 10K, 25 mm -- RK12L12C0A0E -- 0.81 €  
+            actual shaft length (dwg. 2): 16.4 mm (12 mm flattened)  
+            _matching knobs: Unknown, b/c of quite long shaft_
+        + dual channel: 50K, 25 mm -- RK14K12C0A0T -- 1.87 €  
+            actual shaft length (dwg. 2): 16.8 mm (12 mm flattened)  
+            _matching knobs: Unknown, b/c of quite long shaft_
+        + dual channel: 10K, 30 mm -- RK12L12C0A0G (alt. RK12L1230C0T) -- 0.81 €  
+            actual shaft length (dwg. 2): 21.4 mm (12 mm flattened)  
+            _matching knobs: Unknown, b/c of very long shaft_
+        + dual channel: 20K, 30 mm -- RK12L12C0A0A -- 0.81 €  
+            actual shaft length (dwg. 2): 21.4 mm (12 mm flattened)  
+            _matching knobs: Unknown, b/c of very long shaft_
+    * horizontal (front plate):
+        + single channel: none
+        + dual channel: 10K, 30 mm -- RK12L12A0C0R (alt. RK12L1210C0R) -- 0.81 / 0.79 €  
+            actual shaft length (dwg. 1): 21.4 mm (12 mm flattened)  
+            _matching knobs: Unknown, b/c of very long shaft_
+- Alps Alpine Series RK11K/12L/14K (6 mm D-style (4.5 mm) shaft, collar with M7 thread):
+    * vertical (top plate):
+        + dual channel: 10K, 27.5 mm -- RK14K12D0A1X -- 1.13 €  
+            actual shaft length (dwg. 4): 15 mm (12 mm flattened) + 5 mm thread length  
+            _matching knobs: Unknown, b/c of quite long shaft_
+        + dual channel: 50K, 27.5 mm -- RK14K12D0A18 -- 1.13 €  
+            actual shaft length (dwg. 4): 15 mm (12 mm flattened) + 5 mm thread length  
+            _matching knobs: Unknown, b/c of quite long shaft_
+    * horizontal (front plate):
+        + single channel: 20k, 27.5 mm -- RK11K1120A31 -- 1.07 €  
+            actual shaft length (dwg. 3): 20 mm (12 mm flattened) + 5 mm thread length  
+            _matching knobs: Unknown, b/c of very long shaft_
+        + dual channel: 10K, 22.5 mm -- RK14K12B0A0E (alt. RK14K1220A0F) -- 1.13 €  
+            actual shaft length (dwg. 3): 10 mm (7 mm flattened) + 5 mm thread length  
+            _matching knobs: C, B (depending on front plate thickness)_
+        + **dual channel: 50K, 22.5 mm -- RK14K12B0A0R -- 1.13 €**  
+            actual shaft length (dwg. 3): 10 mm (7 mm flattened) + 5 mm thread length  
+            _matching knobs: C, B (depending on front plate thickness)_
+- Alps Alpine Series RK09L (6 mm D-style (4.5 mm) shaft, collar with M7 thread):  
+    * vertical (top plate):
+        + **single channel: 10K, 12.5 mm -- RK09L1140A5E -- 1.61 €**  
+            actual shaft length (dwg. 2): 7.5 mm (7 mm flattened) + 5 mm thread length  
+            _matching knobs: A_
+        + **dual channel: 10K, 15 mm -- RK09L12D0A1W -- 1.64 €**  
+            actual shaft length (dwg. 4): 10 mm (7 mm flattened) + 7 mm thread length  
+            _matching knobs: C, B (depending on front plate thickness)_
+        + dual channel: 10K, 20 mm -- RK09L12D0A1T -- 1.64 €  
+            actual shaft length (dwg. 4): 15 mm (12 mm flattened) + 7 mm thread length  
+            _matching knobs: Unknown, b/c of quite long shaft_
+    * horizontal (front plate):
+        + **single channel: 10K, 15 mm -- RK09L1120A2S -- 1.62 €**  
+            actual shaft length (dwg. 1): 10 mm (7 mm flattened) + 5 mm thread length  
+            _matching knobs: C, B (depending on front plate thickness)_
+        + single channel: 10K, 20 mm -- RK09L1120A69 -- 1.30 €  
+            actual shaft length (dwg. 1): 15 mm (12 mm flattened) + 7 mm thread length  
+            _matching knobs: Unknown, b/c of quite long shaft_
+        + dual channel: 50K, 15 mm -- RK09L12B0A31 -- 1.78 €  
+            actual shaft length (dwg. 3): 10 mm (7 mm flattened) + 5 mm thread length  
+            _matching knobs: C, B (depending on front plate thickness)_
+- Alps Alpine Series RK097 (6 mm D-style (4.5 mm) shaft, collar with M7 thread):  
+    Only horizontal style and quite expensive (2.16 €/ 2.96 €)
+
+Selection:
+- Input gain:
+    * RK09K1130AJ3 (single, 10K, 15 mm) + Re'an F311/ F313 (diameter TBD)
+    * or RK09K12C0A2S (dual, 50K, 20 mm) + Re'an P670 or similar
+- Headphone mix:
+    * RK09K12C0A2S (dual, 50K, 20 mm) + Re'an P670
+- Headphone volume:
+    * RK09K1110B1R (single, 50K, 15 mm) + Re'an F311/ F313 (diameter TBD)
+
+
+### Switches
+The On-Air button needs to be a latching DPDT switch, ideally with LED illumination, like:
 - E-Switch LP11EE1NCSYG
+- TODO: other, less expensive options highly appreciated! Separate LED might also be OK.

 The mute button needs to be a momentary SPST (normally open) or SPDT push button, like:
 - NKK Switches UB15NBKW01N-C
@ -143,11 +252,13 @@ The mute button needs to be a momentary SPST (normally open) or SPDT push button
 - TE Connectivity PB6B2FM3M2CAL00
 - TODO: other, less expensive options highly appreciated!

+
+### Casing
 The casing should be a desk console (angled surface), ideally with space at the front to mount the headset ports (XLR and 6.3 mm jack), like:
 - [Bopla ATPH 1865-0250](https://www.bopla.de/gehaeusetechnik/product/alu-topline/alu-topline-gehaeuse/atph-1865-0250.html) (front might not have enough space for the connectors)
 - TODO: other options appreciated
+- Or laser cut/ 3D print something

-A possible UI layout for the Bopla ATPH 1865-0250 might look like this: ![](docs/ui-layout.jpg)


 ## Notes
@ -164,32 +275,33 @@ Approximate prices in Euro.

 Connectors and Buttons (User Interface)

-| Count | Manufacturer + Art. No.  | Description                      | Price |
+| Count | Manufacturer + Art. No.  | Description                      | €/ pc.|
 |-------|--------------------------|----------------------------------|-------|
 | 1     | Neutrik NAC3 MPA-1       | Mains Power Input                | 3.33  |
 | 1     | Neutrik NCJ 6 FAH        | Line Input                       | 1.27  |
 | 1     | Neutrik NC3 MD-LX        | Line Output                      | 3.22  |
 | 3x1   | Neutrik NCJ 6 FAH        | Headset Microphone Input         | 1.27  |
-| 3x1   | TODO                     | Headphone Output                 | TODO  |
+| 3x1   | Rean NYS 216 G           | Headphone Output                 | 0.93  |
 | 3x1   | NKK UB15NBKW01N-C        | Mute Button                      | 7.50  |
 | 3x1   | E-Switch LP11EE1NCSYG    | On-Air Button                    | 5.00  |
-| 3x1   | Alps RK097111080J        | 10K log Mono Pot. (Gain)         | 2.16  |
-| 3x1   | Alps RK097111080J        | 10K log Mono Pot. (Headset Vol.) | 2.16  |
-| 3x2   | Alps RK097111080J        | 10K log Mono Pot. (Headset Mix)  | 2.16  |
-| 3x1   | Alps RK09712200MC        | 10K log Dual Pot. (Headset Mix)  | 2.96  |
-| 3x5   | TODO                     | Potentiometer Knob               | TODO  |
+| 3x1   | Alps RK09K1130AJ3        | 10K log Mono Pot. (Gain)         | 0.91  |
+| 3x1   | Re'an F311               | Potentiometer Knob               | 0.40  |
+| 3x3   | Alps RK09K12C0A2S        | 50K log Dual Pot. (Headset Mix)  | 1.44  |
+| 3x3   | Re'an P670               | Potentiometer Knob               | 0.78  |
+| 3x1   | Alps RK09K1110B1R        | 50K log Mono Pot. (Headset Vol.) | 0.67  |
+| 3x1   | Re'an F311               | Potentiometer Knob               | 0.40  |
 | 1     | Vishay M64{Y,Z}104       | 100K Trim Pot.                   | 0.95  |
-|       |                          | **SUM**                          | 84.88 |
+|       |                          | **SUM**                          | 79.99 |

 Sub-Components

-| Count | Manufacturer + Art. No.  | Description                      | Price |
+| Count | Manufacturer + Art. No.  | Description                      | €/ pc.|
 |-------|--------------------------|----------------------------------|-------|
 | 1     | Traco Power TXL 035-1515D or TOP 60533 | Power Supply       | ~48.00 |

 PCB Components: TODO when schematic is finished

-| Count | Manufacturer + Art. No.  | Description                      | Price |
+| Count | Manufacturer + Art. No.  | Description                      | €/ pc.|
 |-------|--------------------------|----------------------------------|-------|
 | 3     | NE5534                   | Low-noise Op-Amp                 | 0.54  |
 | 8     | LM833                    | Generic Op-Amp                   | 0.88  |
@ -202,7 +314,7 @@ PCB Components: TODO when schematic is finished

 VU Meter Components

-| Count | Art. No.            | Description         | Price |
+| Count | Art. No.            | Description         | €/ pc.|
 |-------|---------------------|---------------------|-------|
 | 1     | Vishay M64{Y,Z}503  | 50K Trim Pot.       | 0.95  |
 | 1     | LM833               | Generic Op-Amp      | 0.88  |
Author	SHA1	Message	Date
Jannik Beyerstedt	eccdc8b24f	[DOC] reworked potentiometer options	2021-04-11 22:16:40 +02:00
Jannik Beyerstedt	3af2e00e27	[TIDY] restructure readme	2021-04-11 18:23:45 +02:00