##################################################### ### main/01_exim4-config_listmacrosdefs ##################################################### ###################################################################### # Runtime configuration file for Exim 4 (Debian Packaging) # ###################################################################### ###################################################################### # /etc/exim4/exim4.conf.template is only used with the non-split # configuration scheme. # /etc/exim4/conf.d/main/01_exim4-config_listmacrosdefs is only used # with the split configuration scheme. # If you find this comment anywhere else, somebody copied it there. # Documentation about the Debian exim4 configuration scheme can be # found in /usr/share/doc/exim4-base/README.Debian.gz. ###################################################################### ###################################################################### # MAIN CONFIGURATION SETTINGS # ###################################################################### # Just for reference and scripts. # On Debian systems, the main binary is installed as exim4 to avoid # conflicts with the exim 3 packages. exim_path = /usr/sbin/exim4 # Macro defining the main configuration directory. # We do not use absolute paths. .ifndef CONFDIR CONFDIR = /etc/exim4 .endif # debconf-driven macro definitions get inserted after this line UPEX4CmacrosUPEX4C = 1 # Create domain and host lists for relay control # '@' refers to 'the name of the local host' # List of domains considered local for exim. Domains not listed here # need to be deliverable remotely. domainlist local_domains = MAIN_LOCAL_DOMAINS # List of recipient domains to relay _to_. Use this list if you're - # for example - fallback MX or mail gateway for domains. domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS # List of sender networks (IP addresses) to _unconditionally_ relay # _for_. If you intend to be SMTP AUTH server, you do not need to enter # anything here. hostlist relay_from_hosts = MAIN_RELAY_NETS # Decide which domain to use to add to all unqualified addresses. # If MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN is defined, the primary # hostname is used. If not, but MAIN_QUALIFY_DOMAIN is set, the value # of MAIN_QUALIFY_DOMAIN is used. If both macros are not defined, # the first line of /etc/mailname is used. .ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN .ifndef MAIN_QUALIFY_DOMAIN qualify_domain = ETC_MAILNAME .else qualify_domain = MAIN_QUALIFY_DOMAIN .endif .endif # listen on all all interfaces? .ifdef MAIN_LOCAL_INTERFACES local_interfaces = MAIN_LOCAL_INTERFACES .endif .ifndef LOCAL_DELIVERY # The default transport, set in /etc/exim4/update-exim4.conf.conf, # defaulting to mail_spool. See CONFDIR/conf.d/transport/ for possibilities LOCAL_DELIVERY=mail_spool .endif # The gecos field in /etc/passwd holds not only the name. see passwd(5). gecos_pattern = ^([^,:]*) gecos_name = $1 # define macros to be used in acl/30_exim4-config_check_rcpt to check # recipient local parts for strange characters. # This macro definition really should be in # acl/30_exim4-config_check_rcpt but cannot be there due to # http://www.exim.org/bugzilla/show_bug.cgi?id=101 as of exim 4.62. # These macros are documented in acl/30_exim4-config_check_rcpt, # can be changed here or overridden by a locally added configuration # file as described in README.Debian section "Using Exim Macros to control # the configuration". .ifndef CHECK_RCPT_LOCAL_LOCALPARTS CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?] .endif .ifndef CHECK_RCPT_REMOTE_LOCALPARTS CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./ .endif # always log tls_peerdn as we use TLS for outgoing connects by default .ifndef MAIN_LOG_SELECTOR MAIN_LOG_SELECTOR = +smtp_protocol_error +smtp_syntax_error +tls_certificate_verified +tls_peerdn .endif ##################################################### ### end main/01_exim4-config_listmacrosdefs ##################################################### ##################################################### ### main/02_exim4-config_options ##################################################### ### main/02_exim4-config_options ################################# # Defines the access control list that is run when an # SMTP MAIL command is received. # .ifndef MAIN_ACL_CHECK_MAIL MAIN_ACL_CHECK_MAIL = acl_check_mail .endif acl_smtp_mail = MAIN_ACL_CHECK_MAIL # Defines the access control list that is run when an # SMTP RCPT command is received. # .ifndef MAIN_ACL_CHECK_RCPT MAIN_ACL_CHECK_RCPT = acl_check_rcpt .endif acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT # Defines the access control list that is run when an # SMTP DATA command is received. # .ifndef MAIN_ACL_CHECK_DATA MAIN_ACL_CHECK_DATA = acl_check_data .endif acl_smtp_data = MAIN_ACL_CHECK_DATA # Message size limit. The default (used when MESSAGE_SIZE_LIMIT # is unset) is 50 MB .ifdef MESSAGE_SIZE_LIMIT message_size_limit = MESSAGE_SIZE_LIMIT .endif # If you are running exim4-daemon-heavy or a custom version of Exim that # was compiled with the content-scanning extension, you can cause incoming # messages to be automatically scanned for viruses. You have to modify the # configuration in two places to set this up. The first of them is here, # where you define the interface to your scanner. This example is typical # for ClamAV; see the manual for details of what to set for other virus # scanners. The second modification is in the acl_check_data access # control list. # av_scanner = clamd:/var/run/clamav/clamd.ctl # For spam scanning, there is a similar option that defines the interface to # SpamAssassin. You do not need to set this if you are using the default, which # is shown in this commented example. As for virus scanning, you must also # modify the acl_check_data access control list to enable spam scanning. # spamd_address = 127.0.0.1 783 # Domain used to qualify unqualified recipient addresses # If this option is not set, the qualify_domain value is used. # qualify_recipient = # Allow Exim to recognize addresses of the form "user@[10.11.12.13]", # where the domain part is a "domain literal" (an IP address) instead # of a named domain. The RFCs require this facility, but it is disabled # in the default config since it is rarely used and frequently abused. # Domain literal support also needs a special router, which is automatically # enabled if you use the enable macro MAIN_ALLOW_DOMAIN_LITERALS. # Additionally, you might want to make your local IP addresses (or @[]) # local domains. .ifdef MAIN_ALLOW_DOMAIN_LITERALS allow_domain_literals .endif # Do a reverse DNS lookup on all incoming IP calls, in order to get the # true host name. If you feel this is too expensive, the networks for # which a lookup is done can be listed here. .ifndef DC_minimaldns .ifndef MAIN_HOST_LOOKUP MAIN_HOST_LOOKUP = * .endif host_lookup = MAIN_HOST_LOOKUP .endif # In a minimaldns setup, update-exim4.conf guesses the hostname and # dumps it here to avoid DNS lookups being done at Exim run time. .ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME .endif # The settings below cause Exim to make RFC 1413 (ident) callbacks # for all incoming SMTP calls. You can limit the hosts to which these # calls are made, and/or change the timeout that is used. If you set # the timeout to zero, all RFC 1413 calls are disabled. RFC 1413 calls # are cheap and can provide useful information for tracing problem # messages, but some hosts and firewalls have problems with them. # This can result in a timeout instead of an immediate refused # connection, leading to delays on starting up SMTP sessions. # (The default was reduced from 30s to 5s for release 4.61. and to # disabled for release 4.86) # #rfc1413_hosts = * #rfc1413_query_timeout = 5s # Enable an efficiency feature. We advertise the feature; clients # may request to use it. For multi-recipient mails we then can # reject or accept per-user after the message is received. # prdr_enable = true # When using an external relay tester (such as rt.njabl.org and/or the # currently defunct relay-test.mail-abuse.org, the test may be aborted # since exim complains about "too many nonmail commands". If you want # the test to complete, add the host from where "your" relay tester # connects from to the MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS macro. # Please note that a non-empty setting may cause extra DNS lookups to # happen, which is the reason why this option is commented out in the # default settings. # MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS = !rt.njabl.org .ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS .endif # By default, exim forces a Sender: header containing the local # account name at the local host name in all locally submitted messages # that don't have the local account name at the local host name in the # From: header, deletes any Sender: header present in the submitted # message and forces the envelope sender of all locally submitted # messages to the local account name at the local host name. # The following settings allow local users to specify their own envelope sender # in a locally submitted message. Sender: headers existing in a locally # submitted message are not removed, and no automatic Sender: headers # are added. These settings are fine for most hosts. # If you run exim on a classical multi-user systems where all users # have local mailboxes that can be reached via SMTP from the Internet # with the local FQDN as the domain part of the address, you might want # to disable the following three lines for traceability reasons. .ifndef MAIN_FORCE_SENDER local_from_check = false local_sender_retain = true untrusted_set_sender = * .endif # By default, Exim expects all envelope addresses to be fully qualified, that # is, they must contain both a local part and a domain. Configure exim # to accept unqualified addresses from certain hosts. When this is done, # unqualified addresses are qualified using the settings of qualify_domain # and/or qualify_recipient (see above). # sender_unqualified_hosts = # recipient_unqualified_hosts = # Configure Exim to support the "percent hack" for certain domains. # The "percent hack" is the feature by which mail addressed to x%y@z # (where z is one of the domains listed) is locally rerouted to x@y # and sent on. If z is not one of the "percent hack" domains, x%y is # treated as an ordinary local part. The percent hack is rarely needed # nowadays but frequently abused. You should not enable it unless you # are sure that you really need it. # percent_hack_domains = # Bounce handling .ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d .endif ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER .ifndef MAIN_TIMEOUT_FROZEN_AFTER MAIN_TIMEOUT_FROZEN_AFTER = 7d .endif timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER .ifndef MAIN_FREEZE_TELL MAIN_FREEZE_TELL = postmaster .endif freeze_tell = MAIN_FREEZE_TELL # Define spool directory .ifndef SPOOLDIR SPOOLDIR = /var/spool/exim4 .endif spool_directory = SPOOLDIR # trusted users can set envelope-from to arbitrary values .ifndef MAIN_TRUSTED_USERS MAIN_TRUSTED_USERS = uucp .endif trusted_users = MAIN_TRUSTED_USERS .ifdef MAIN_TRUSTED_GROUPS trusted_groups = MAIN_TRUSTED_GROUPS .endif # users in admin group can do many other things # admin_groups = # SMTP Banner. The example includes the Debian version in the SMTP dialog # MAIN_SMTP_BANNER = "${primary_hostname} ESMTP Exim ${version_number} (Debian package MAIN_PACKAGE_VERSION) ${tod_full}" # smtp_banner = $smtp_active_hostname ESMTP Exim $version_number $tod_full .ifdef MAIN_KEEP_ENVIRONMENT keep_environment = MAIN_KEEP_ENVIRONMENT .else # set option to empty value to avoid warning. keep_environment = .endif .ifdef MAIN_ADD_ENVIRONMENT add_environment = MAIN_ADD_ENVIRONMENT .endif ##################################################### ### end main/02_exim4-config_options ##################################################### ##################################################### ### main/03_exim4-config_tlsoptions ##################################################### ### main/03_exim4-config_tlsoptions ################################# # TLS/SSL configuration for exim as an SMTP server. # See /usr/share/doc/exim4-base/README.Debian.gz for explanations. .ifdef MAIN_TLS_ENABLE # Defines what hosts to 'advertise' STARTTLS functionality to. The # default, *, will advertise to all hosts that connect with EHLO. .ifndef MAIN_TLS_ADVERTISE_HOSTS MAIN_TLS_ADVERTISE_HOSTS = * .endif tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS # Full paths to Certificate and Private Key. The Private Key file # must be kept 'secret' and should be owned by root.Debian-exim mode # 640 (-rw-r-----). exim-gencert takes care of these prerequisites. # Normally, exim4 looks for certificate and key in different files: # MAIN_TLS_CERTIFICATE - path to certificate file, # CONFDIR/exim.crt if unset # MAIN_TLS_PRIVATEKEY - path to private key file # CONFDIR/exim.key if unset # You can also configure exim to look for certificate and key in the # same file, set MAIN_TLS_CERTKEY to that file to enable. This takes # precedence over all other settings regarding certificate and key file. .ifdef MAIN_TLS_CERTKEY tls_certificate = MAIN_TLS_CERTKEY .else .ifndef MAIN_TLS_CERTIFICATE MAIN_TLS_CERTIFICATE = CONFDIR/exim.crt .endif tls_certificate = MAIN_TLS_CERTIFICATE .ifndef MAIN_TLS_PRIVATEKEY MAIN_TLS_PRIVATEKEY = CONFDIR/exim.key .endif tls_privatekey = MAIN_TLS_PRIVATEKEY .endif # Pointer to the CA Certificates against which client certificates are # checked. This is controlled by the `tls_verify_hosts' and # `tls_try_verify_hosts' lists below. # If you want to check server certificates, you need to add an # tls_verify_certificates statement to the smtp transport. # /etc/ssl/certs/ca-certificates.crt is generated by # the "ca-certificates" package's update-ca-certificates(8) command. .ifndef MAIN_TLS_VERIFY_CERTIFICATES MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/ca-certificates.crt}\ {/etc/ssl/certs/ca-certificates.crt}\ {/dev/null}} .endif tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES # A list of hosts which are constrained by `tls_verify_certificates'. A host # that matches `tls_verify_host' must present a certificate that is # verifyable through `tls_verify_certificates' in order to be accepted as an # SMTP client. If it does not, the connection is aborted. .ifdef MAIN_TLS_VERIFY_HOSTS tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS .endif # A weaker form of checking: if a client matches `tls_try_verify_hosts' (but # not `tls_verify_hosts'), request a certificate and check it against # `tls_verify_certificates' but do not abort the connection if there is no # certificate or if the certificate presented does not match. (This # condition can be tested for in ACLs through `verify = certificate') # By default, this check is done for all hosts. It is known that some # clients (including incredimail's version downloadable in February # 2008) choke on this. To disable, set MAIN_TLS_TRY_VERIFY_HOSTS to an # empty value. .ifdef MAIN_TLS_TRY_VERIFY_HOSTS tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS .endif .ifdef _HAVE_GNUTLS tls_dhparam = historic .endif .else # Don't advertise TLS if MAIN_TLS_ENABLE is not set. tls_advertise_hosts = .endif ##################################################### ### end main/03_exim4-config_tlsoptions ##################################################### ##################################################### ### main/90_exim4-config_log_selector ##################################################### ### main/90_exim4-config_log_selector ################################# # uncomment this for debugging # MAIN_LOG_SELECTOR == MAIN_LOG_SELECTOR +all -subject -arguments .ifdef MAIN_LOG_SELECTOR log_selector = MAIN_LOG_SELECTOR .endif ##################################################### ### end main/90_exim4-config_log_selector ##################################################### ##################################################### ### acl/00_exim4-config_header ##################################################### ###################################################################### # ACL CONFIGURATION # # Specifies access control lists for incoming SMTP mail # ###################################################################### begin acl ##################################################### ### end acl/00_exim4-config_header ##################################################### ##################################################### ### acl/20_exim4-config_local_deny_exceptions ##################################################### ### acl/20_exim4-config_local_deny_exceptions ################################# # This is used to determine whitelisted senders and hosts. # It checks for CONFDIR/host_local_deny_exceptions and # CONFDIR/sender_local_deny_exceptions. # # It is meant to be used from some other acl entry. # # See exim4-config_files(5) for details. # # If the files do not exist, the white list never matches, which is # the desired behaviour. # # The old file names CONFDIR/local_host_whitelist and # CONFDIR/local_sender_whitelist will continue to be honored for a # transition period. Their use is deprecated. acl_local_deny_exceptions: accept hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\ {CONFDIR/host_local_deny_exceptions}\ {}} accept senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\ {CONFDIR/sender_local_deny_exceptions}\ {}} accept hosts = ${if exists{CONFDIR/local_host_whitelist}\ {CONFDIR/local_host_whitelist}\ {}} accept senders = ${if exists{CONFDIR/local_sender_whitelist}\ {CONFDIR/local_sender_whitelist}\ {}} # This hook allows you to hook in your own ACLs without having to # modify this file. If you do it like we suggest, you'll end up with # a small performance penalty since there is an additional file being # accessed. This doesn't happen if you leave the macro unset. .ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE .include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE .endif # this is still supported for a transition period and is deprecated. .ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE .include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE .endif ##################################################### ### end acl/20_exim4-config_local_deny_exceptions ##################################################### ##################################################### ### acl/30_exim4-config_check_mail ##################################################### ### acl/30_exim4-config_check_mail ################################# # This access control list is used for every MAIL command in an incoming # SMTP message. The tests are run in order until the address is either # accepted or denied. # acl_check_mail: accept ##################################################### ### end acl/30_exim4-config_check_mail ##################################################### ##################################################### ### acl/30_exim4-config_check_rcpt ##################################################### ### acl/30_exim4-config_check_rcpt ################################# # This access control list is used for every RCPT command in an incoming # SMTP message. The tests are run in order until the address is either # accepted or denied. # acl_check_rcpt: # Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by # testing for an empty sending host field. accept hosts = : control = dkim_disable_verify # Do not try to verify DKIM signatures of incoming mail if DC_minimaldns # or DISABLE_DKIM_VERIFY are set. .ifdef DC_minimaldns warn control = dkim_disable_verify .else .ifdef DISABLE_DKIM_VERIFY warn control = dkim_disable_verify .endif .endif # The following section of the ACL is concerned with local parts that contain # certain non-alphanumeric characters. Dots in unusual places are # handled by this ACL as well. # # Non-alphanumeric characters other than dots are rarely found in genuine # local parts, but are often tried by people looking to circumvent # relaying restrictions. Therefore, although they are valid in local # parts, these rules disallow certain non-alphanumeric characters, as # a precaution. # # Empty components (two dots in a row) are not valid in RFC 2822, but Exim # allows them because they have been encountered. (Consider local parts # constructed as "firstinitial.secondinitial.familyname" when applied to # a name without a second initial.) However, a local part starting # with a dot or containing /../ can cause trouble if it is used as part of a # file name (e.g. for a mailing list). This is also true for local parts that # contain slashes. A pipe symbol can also be troublesome if the local part is # incorporated unthinkingly into a shell command line. # # These ACL components will block recipient addresses that are valid # from an RFC2822 point of view. We chose to have them blocked by # default for security reasons. # # If you feel that your site should have less strict recipient # checking, please feel free to change the default values of the macros # defined in main/01_exim4-config_listmacrosdefs or override them from a # local configuration file. # # Two different rules are used. The first one has a quite strict # default, and is applied to messages that are addressed to one of the # local domains handled by this host. # The default value of CHECK_RCPT_LOCAL_LOCALPARTS is defined in # main/01_exim4-config_listmacrosdefs: # CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?] # This blocks local parts that begin with a dot or contain a quite # broad range of non-alphanumeric characters. .ifdef CHECK_RCPT_LOCAL_LOCALPARTS deny domains = +local_domains local_parts = CHECK_RCPT_LOCAL_LOCALPARTS message = restricted characters in address .endif # The second rule applies to all other domains, and its default is # considerably less strict. # The default value of CHECK_RCPT_REMOTE_LOCALPARTS is defined in # main/01_exim4-config_listmacrosdefs: # CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./ # It allows local users to send outgoing messages to sites # that use slashes and vertical bars in their local parts. It blocks # local parts that begin with a dot, slash, or vertical bar, but allows # these characters within the local part. However, the sequence /../ is # barred. The use of some other non-alphanumeric characters is blocked. # Single quotes might probably be dangerous as well, but they're # allowed by the default regexps to avoid rejecting mails to Ireland. # The motivation here is to prevent local users (or local users' malware) # from mounting certain kinds of attack on remote sites. .ifdef CHECK_RCPT_REMOTE_LOCALPARTS deny domains = !+local_domains local_parts = CHECK_RCPT_REMOTE_LOCALPARTS message = restricted characters in address .endif # Accept mail to postmaster in any local domain, regardless of the source, # and without verifying the sender. # accept .ifndef CHECK_RCPT_POSTMASTER local_parts = postmaster .else local_parts = CHECK_RCPT_POSTMASTER .endif domains = +local_domains : +relay_to_domains # Deny unless the sender address can be verified. # # This is disabled by default so that DNSless systems don't break. If # your system can do DNS lookups without delay or cost, you might want # to enable this feature. # # This feature does not work in smarthost and satellite setups as # with these setups all domains pass verification. See spec.txt section # "Access control lists" subsection "Address verification" with the added # information that a smarthost/satellite setup routes all non-local e-mail # to the smarthost. .ifdef CHECK_RCPT_VERIFY_SENDER deny message = Sender verification failed !acl = acl_local_deny_exceptions !verify = sender .endif # Verify senders listed in local_sender_callout with a callout. # # In smarthost and satellite setups, this causes the callout to be # done to the smarthost. Verification will thus only be reliable if the # smarthost does reject illegal addresses in the SMTP dialog. deny !acl = acl_local_deny_exceptions senders = ${if exists{CONFDIR/local_sender_callout}\ {CONFDIR/local_sender_callout}\ {}} !verify = sender/callout # Accept if the message comes from one of the hosts for which we are an # outgoing relay. It is assumed that such hosts are most likely to be MUAs, # so we set control=submission to make Exim treat the message as a # submission. It will fix up various errors in the message, for example, the # lack of a Date: header line. If you are actually relaying out out from # MTAs, you may want to disable this. If you are handling both relaying from # MTAs and submissions from MUAs you should probably split them into two # lists, and handle them differently. # Recipient verification is omitted here, because in many cases the clients # are dumb MUAs that don't cope well with SMTP error responses. If you are # actually relaying out from MTAs, you should probably add recipient # verification here. # Note that, by putting this test before any DNS black list checks, you will # always accept from these hosts, even if they end up on a black list. The # assumption is that they are your friends, and if they get onto black # list, it is a mistake. accept hosts = +relay_from_hosts control = submission/sender_retain control = dkim_disable_verify # Accept if the message arrived over an authenticated connection, from # any host. Again, these messages are usually from MUAs, so recipient # verification is omitted, and submission mode is set. And again, we do this # check before any black list tests. accept authenticated = * control = submission/sender_retain control = dkim_disable_verify # Insist that a HELO/EHLO was accepted. require message = nice hosts say HELO first condition = ${if def:sender_helo_name} # Insist that any other recipient address that we accept is either in one of # our local domains, or is in a domain for which we explicitly allow # relaying. Any other domain is rejected as being unacceptable for relaying. require message = relay not permitted domains = +local_domains : +relay_to_domains # We also require all accepted addresses to be verifiable. This check will # do local part verification for local domains, but only check the domain # for remote domains. require verify = recipient # Verify recipients listed in local_rcpt_callout with a callout. # This is especially handy for forwarding MX hosts (secondary MX or # mail hubs) of domains that receive a lot of spam to non-existent # addresses. The only way to check local parts for remote relay # domains is to use a callout (add /callout), but please read the # documentation about callouts before doing this. deny !acl = acl_local_deny_exceptions recipients = ${if exists{CONFDIR/local_rcpt_callout}\ {CONFDIR/local_rcpt_callout}\ {}} !verify = recipient/callout # CONFDIR/local_sender_blacklist holds a list of envelope senders that # should have their access denied to the local host. Incoming messages # with one of these senders are rejected at RCPT time. # # The explicit white lists are honored as well as negative items in # the black list. See exim4-config_files(5) for details. deny message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster !acl = acl_local_deny_exceptions senders = ${if exists{CONFDIR/local_sender_blacklist}\ {CONFDIR/local_sender_blacklist}\ {}} # deny bad sites (IP address) # CONFDIR/local_host_blacklist holds a list of host names, IP addresses # and networks (CIDR notation) that should have their access denied to # The local host. Messages coming in from a listed host will have all # RCPT statements rejected. # # The explicit white lists are honored as well as negative items in # the black list. See exim4-config_files(5) for details. deny message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster !acl = acl_local_deny_exceptions hosts = ${if exists{CONFDIR/local_host_blacklist}\ {CONFDIR/local_host_blacklist}\ {}} # Warn if the sender host does not have valid reverse DNS. # # If your system can do DNS lookups without delay or cost, you might want # to enable this. # If sender_host_address is defined, it's a remote call. If # sender_host_name is not defined, then reverse lookup failed. Use # this instead of !verify = reverse_host_lookup to catch deferrals # as well as outright failures. .ifdef CHECK_RCPT_REVERSE_DNS warn condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\ {yes}{no}} add_header = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}}) .endif # Use spfquery to perform a pair of SPF checks (for details, see # http://www.openspf.org/) # # This is quite costly in terms of DNS lookups (~6 lookups per mail). Do not # enable if that's an issue. Also note that if you enable this, you must # install "spf-tools-perl" which provides the spfquery command. # Missing spf-tools-perl will trigger the "Unexpected error in # SPF check" warning. .ifdef CHECK_RCPT_SPF deny message = [SPF] $sender_host_address is not allowed to send mail from \ ${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}. \ Please see \ http://www.openspf.org/Why?scope=${if def:sender_address_domain \ {mfrom}{helo}};identity=${if def:sender_address_domain \ {$sender_address}{$sender_helo_name}};ip=$sender_host_address log_message = SPF check failed. !acl = acl_local_deny_exceptions condition = ${run{/usr/bin/spfquery.mail-spf-perl --ip \ ${quote:$sender_host_address} --identity \ ${if def:sender_address_domain \ {--scope mfrom --identity ${quote:$sender_address}}\ {--scope helo --identity ${quote:$sender_helo_name}}}}\ {no}{${if eq {$runrc}{1}{yes}{no}}}} defer message = Temporary DNS error while checking SPF record. Try again later. !acl = acl_local_deny_exceptions condition = ${if eq {$runrc}{5}{yes}{no}} warn condition = ${if <={$runrc}{6}{yes}{no}} add_header = Received-SPF: ${if eq {$runrc}{0}{pass}\ {${if eq {$runrc}{2}{softfail}\ {${if eq {$runrc}{3}{neutral}\ {${if eq {$runrc}{4}{permerror}\ {${if eq {$runrc}{6}{none}{error}}}}}}}}}\ } client-ip=$sender_host_address; \ ${if def:sender_address_domain \ {envelope-from=${sender_address}; }{}}\ helo=$sender_helo_name warn log_message = Unexpected error in SPF check. condition = ${if >{$runrc}{6}{yes}{no}} .endif # Check against classic DNS "black" lists (DNSBLs) which list # sender IP addresses .ifdef CHECK_RCPT_IP_DNSBLS warn dnslists = CHECK_RCPT_IP_DNSBLS add_header = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text) log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text) .endif # Check against DNSBLs which list sender domains, with an option to locally # whitelist certain domains that might be blacklisted. # # Note: If you define CHECK_RCPT_DOMAIN_DNSBLS, you must append # "/$sender_address_domain" after each domain. For example: # CHECK_RCPT_DOMAIN_DNSBLS = rhsbl.foo.org/$sender_address_domain \ # : rhsbl.bar.org/$sender_address_domain .ifdef CHECK_RCPT_DOMAIN_DNSBLS warn !senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\ {CONFDIR/local_domain_dnsbl_whitelist}\ {}} dnslists = CHECK_RCPT_DOMAIN_DNSBLS add_header = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text) log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text) .endif # This hook allows you to hook in your own ACLs without having to # modify this file. If you do it like we suggest, you'll end up with # a small performance penalty since there is an additional file being # accessed. This doesn't happen if you leave the macro unset. .ifdef CHECK_RCPT_LOCAL_ACL_FILE .include CHECK_RCPT_LOCAL_ACL_FILE .endif ############################################################################# # This check is commented out because it is recognized that not every # sysadmin will want to do it. If you enable it, the check performs # Client SMTP Authorization (csa) checks on the sending host. These checks # do DNS lookups for SRV records. The CSA proposal is currently (May 2005) # an Internet draft. You can, of course, add additional conditions to this # ACL statement to restrict the CSA checks to certain hosts only. # # require verify = csa ############################################################################# # Accept if the address is in a domain for which we are an incoming relay, # but again, only if the recipient can be verified. accept domains = +relay_to_domains endpass verify = recipient # At this point, the address has passed all the checks that have been # configured, so we accept it unconditionally. accept ##################################################### ### end acl/30_exim4-config_check_rcpt ##################################################### ##################################################### ### acl/40_exim4-config_check_data ##################################################### ### acl/40_exim4-config_check_data ################################# # This ACL is used after the contents of a message have been received. This # is the ACL in which you can test a message's headers or body, and in # particular, this is where you can invoke external virus or spam scanners. acl_check_data: # Deny if the message contains an overlong line. Per the standards # we should never receive one such via SMTP. # .ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT deny message = maximum allowed line length is 998 octets, \ got $max_received_linelength condition = ${if > {$max_received_linelength}{998}} .endif # Deny unless the address list headers are syntactically correct. # # If you enable this, you might reject legitimate mail. .ifdef CHECK_DATA_VERIFY_HEADER_SYNTAX deny message = Message headers fail syntax check !acl = acl_local_deny_exceptions !verify = header_syntax .endif # require that there is a verifiable sender address in at least # one of the "Sender:", "Reply-To:", or "From:" header lines. .ifdef CHECK_DATA_VERIFY_HEADER_SENDER deny message = No verifiable sender address in message headers !acl = acl_local_deny_exceptions !verify = header_sender .endif # Deny if the message contains malware. Before enabling this check, you # must install a virus scanner and set the av_scanner option in the # main configuration. # # exim4-daemon-heavy must be used for this section to work. # # deny # malware = * # message = This message was detected as possible malware ($malware_name). # Add headers to a message if it is judged to be spam. Before enabling this, # you must install SpamAssassin. You also need to set the spamd_address # option in the main configuration. # # exim4-daemon-heavy must be used for this section to work. # # Please note that this is only suiteable as an example. There are # multiple issues with this configuration method. For example, if you go # this way, you'll give your spamassassin daemon write access to the # entire exim spool which might be a security issue in case of a # spamassassin exploit. # # See the exim docs and the exim wiki for more suitable examples. # # warn # spam = Debian-exim:true # add_header = X-Spam_score: $spam_score\n\ # X-Spam_score_int: $spam_score_int\n\ # X-Spam_bar: $spam_bar\n\ # X-Spam_report: $spam_report # This hook allows you to hook in your own ACLs without having to # modify this file. If you do it like we suggest, you'll end up with # a small performance penalty since there is an additional file being # accessed. This doesn't happen if you leave the macro unset. .ifdef CHECK_DATA_LOCAL_ACL_FILE .include CHECK_DATA_LOCAL_ACL_FILE .endif # accept otherwise accept ##################################################### ### end acl/40_exim4-config_check_data ##################################################### ##################################################### ### router/00_exim4-config_header ##################################################### ###################################################################### # ROUTERS CONFIGURATION # # Specifies how addresses are handled # ###################################################################### # THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! # # An address is passed to each router in turn until it is accepted. # ###################################################################### begin routers ##################################################### ### end router/00_exim4-config_header ##################################################### ##################################################### ### router/100_exim4-config_domain_literal ##################################################### ### router/100_exim4-config_domain_literal ################################# # This router handles e-mail addresses in "domain literal" form like # . The RFCs require this facility, but it is disabled # in the default config since it is rarely used and frequently abused. # Domain literal support also needs to be enabled in the main config, # which is automatically done if you use the enable macro # MAIN_ALLOW_DOMAIN_LITERALS. .ifdef MAIN_ALLOW_DOMAIN_LITERALS domain_literal: debug_print = "R: domain_literal for $local_part@$domain" driver = ipliteral domains = ! +local_domains transport = remote_smtp .endif ##################################################### ### end router/100_exim4-config_domain_literal ##################################################### ##################################################### ### router/150_exim4-config_hubbed_hosts ##################################################### # router/150_exim4-config_hubbed_hosts ################################# # route specific domains manually. # # see exim4-config_files(5) and spec.txt chapter 20.3 through 20.7 for # more detailed documentation. hubbed_hosts: debug_print = "R: hubbed_hosts for $domain" driver = manualroute domains = "${if exists{CONFDIR/hubbed_hosts}\ {partial-lsearch;CONFDIR/hubbed_hosts}\ fail}" same_domain_copy_routing = yes route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}} transport = remote_smtp ##################################################### ### end router/150_exim4-config_hubbed_hosts ##################################################### ##################################################### ### router/200_exim4-config_primary ##################################################### ### router/200_exim4-config_primary ################################# # This file holds the primary router, responsible for nonlocal mails .ifdef DCconfig_internet # configtype=internet # # deliver mail to the recipient if recipient domain is a domain we # relay for. We do not ignore any target hosts here since delivering to # a site local or even a link local address might be wanted here, and if # such an address has found its way into the MX record of such a domain, # the local admin is probably in a place where that broken MX record # could be fixed. dnslookup_relay_to_domains: debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain" driver = dnslookup domains = ! +local_domains : +relay_to_domains transport = remote_smtp same_domain_copy_routing = yes no_more # deliver mail directly to the recipient. This router is only reached # for domains that we do not relay for. Since we most probably can't # have broken MX records pointing to site local or link local IP # addresses fixed, we ignore target hosts pointing to these addresses. dnslookup: debug_print = "R: dnslookup for $local_part@$domain" driver = dnslookup domains = ! +local_domains transport = remote_smtp same_domain_copy_routing = yes # ignore private rfc1918 and APIPA addresses ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\ 172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16 :\ 255.255.255.255 no_more .endif .ifdef DCconfig_local # configtype=local # # Stand-alone system, so generate an error for mail to a non-local domain nonlocal: debug_print = "R: nonlocal for $local_part@$domain" driver = redirect domains = ! +local_domains allow_fail data = :fail: Mailing to remote domains not supported no_more .endif .ifdef DCconfig_smarthost DCconfig_satellite # configtype=smarthost or configtype=satellite # # Send all non-local mail to a single other machine (smarthost). # # This means _ALL_ non-local mail goes to the smarthost. This will most # probably not do what you want for domains that are listed in # relay_domains. The most typical use for relay_domains is to control # relaying for incoming e-mail on secondary MX hosts. In that case, # it doesn't make sense to send the mail to the smarthost since the # smarthost will probably send the message right back here, causing a # loop. # # If you want to use a smarthost while being secondary MX for some # domains, you'll need to copy the dnslookup_relay_to_domains router # here so that mail to relay_domains is handled separately. smarthost: debug_print = "R: smarthost for $local_part@$domain" driver = manualroute domains = ! +local_domains transport = remote_smtp_smarthost route_list = * DCsmarthost byname host_find_failed = ignore same_domain_copy_routing = yes no_more .endif # The "no_more" above means that all later routers are for # domains in the local_domains list, i.e. just like Exim 3 directors. ##################################################### ### end router/200_exim4-config_primary ##################################################### ##################################################### ### router/300_exim4-config_real_local ##################################################### ### router/300_exim4-config_real_local ################################# # This router allows reaching a local user while avoiding local # processing. This can be used to inform a user of a broken .forward # file, for example. The userforward router does this. COND_LOCAL_SUBMITTER = "\ ${if match_ip{$sender_host_address}{:@[]}\ {1}{0}\ }" real_local: debug_print = "R: real_local for $local_part@$domain" driver = accept domains = +local_domains condition = COND_LOCAL_SUBMITTER local_part_prefix = real- check_local_user transport = LOCAL_DELIVERY ##################################################### ### end router/300_exim4-config_real_local ##################################################### ##################################################### ### router/400_exim4-config_system_aliases ##################################################### ### router/400_exim4-config_system_aliases ################################# # This router handles aliasing using a traditional /etc/aliases file. # ##### NB You must ensure that /etc/aliases exists. It used to be the case ##### NB that every Unix had that file, because it was the Sendmail default. ##### NB These days, there are systems that don't have it. Your aliases ##### NB file should at least contain an alias for "postmaster". # # This router handles the local part in a case-insensitive way which # satisfies the RFCs requirement that postmaster be reachable regardless # of case. If you decide to handle /etc/aliases in a caseful way, you # need to make arrangements for a caseless postmaster. # # Delivery to arbitrary directories, files, and piping to programs in # /etc/aliases is disabled per default. # If that is a problem for you, see # /usr/share/doc/exim4-base/README.Debian.gz # for explanation and some workarounds. system_aliases: debug_print = "R: system_aliases for $local_part@$domain" driver = redirect domains = +local_domains allow_fail allow_defer data = ${lookup{$local_part}lsearch{/etc/aliases}} .ifdef SYSTEM_ALIASES_USER user = SYSTEM_ALIASES_USER .endif .ifdef SYSTEM_ALIASES_GROUP group = SYSTEM_ALIASES_GROUP .endif .ifdef SYSTEM_ALIASES_FILE_TRANSPORT file_transport = SYSTEM_ALIASES_FILE_TRANSPORT .endif .ifdef SYSTEM_ALIASES_PIPE_TRANSPORT pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT .endif .ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT .endif ##################################################### ### end router/400_exim4-config_system_aliases ##################################################### ##################################################### ### router/500_exim4-config_hubuser ##################################################### ### router/500_exim4-config_hubuser ################################# .ifdef DCconfig_satellite # This router is only used for configtype=satellite. # It takes care to route all mail targeted to # to the host where we read our mail # hub_user: debug_print = "R: hub_user for $local_part@$domain" driver = redirect domains = +local_domains data = ${local_part}@DCreadhost check_local_user # Grab the redirected mail and deliver it. # This is a duplicate of the smarthost router, needed because # DCreadhost might end up as part of +local_domains hub_user_smarthost: debug_print = "R: hub_user_smarthost for $local_part@$domain" driver = manualroute domains = DCreadhost transport = remote_smtp_smarthost route_list = * DCsmarthost byname host_find_failed = ignore same_domain_copy_routing = yes check_local_user .endif ##################################################### ### end router/500_exim4-config_hubuser ##################################################### ##################################################### ### router/600_exim4-config_userforward ##################################################### ### router/600_exim4-config_userforward ################################# # This router handles forwarding using traditional .forward files in users' # home directories. It also allows mail filtering with a forward file # starting with the string "# Exim filter" or "# Sieve filter". # # The no_verify setting means that this router is skipped when Exim is # verifying addresses. Similarly, no_expn means that this router is skipped if # Exim is processing an EXPN command. # # The check_ancestor option means that if the forward file generates an # address that is an ancestor of the current one, the current one gets # passed on instead. This covers the case where A is aliased to B and B # has a .forward file pointing to A. # # The four transports specified at the end are those that are used when # forwarding generates a direct delivery to a directory, or a file, or to a # pipe, or sets up an auto-reply, respectively. # userforward: debug_print = "R: userforward for $local_part@$domain" driver = redirect domains = +local_domains check_local_user file = $home/.forward require_files = $local_part:$home/.forward no_verify no_expn check_ancestor allow_filter forbid_smtp_code = true directory_transport = address_directory file_transport = address_file pipe_transport = address_pipe reply_transport = address_reply skip_syntax_errors syntax_errors_to = real-$local_part@$domain syntax_errors_text = \ This is an automatically generated message. An error has\n\ been found in your .forward file. Details of the error are\n\ reported below. While this error persists, you will receive\n\ a copy of this message for every message that is addressed\n\ to you. If your .forward file is a filter file, or if it is\n\ a non-filter file containing no valid forwarding addresses,\n\ a copy of each incoming message will be put in your normal\n\ mailbox. If a non-filter file contains at least one valid\n\ forwarding address, forwarding to the valid addresses will\n\ happen, and those will be the only deliveries that occur. ##################################################### ### end router/600_exim4-config_userforward ##################################################### ##################################################### ### router/700_exim4-config_procmail ##################################################### procmail: debug_print = "R: procmail for $local_part@$domain" driver = accept domains = +local_domains check_local_user transport = procmail_pipe # emulate OR with "if exists"-expansion require_files = ${local_part}:\ ${if exists{/etc/procmailrc}\ {/etc/procmailrc}{${home}/.procmailrc}}:\ +/usr/bin/procmail no_verify no_expn ##################################################### ### end router/700_exim4-config_procmail ##################################################### ##################################################### ### router/800_exim4-config_maildrop ##################################################### ### router/800_exim4-config_maildrop ################################# maildrop: debug_print = "R: maildrop for $local_part@$domain" driver = accept domains = +local_domains check_local_user transport = maildrop_pipe require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop no_verify no_expn ##################################################### ### end router/800_exim4-config_maildrop ##################################################### ##################################################### ### router/850_exim4-config_lowuid ##################################################### ### router/850_exim4-config_lowuid ################################# .ifndef FIRST_USER_ACCOUNT_UID FIRST_USER_ACCOUNT_UID = 0 .endif .ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts .endif COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\ ${if and{{! match_ip{$sender_host_address}{:@[]}}\ {<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\ {1}{0}\ }" lowuid_aliases: debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)" check_local_user driver = redirect allow_fail domains = +local_domains condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER data = ${if exists{CONFDIR/lowuid-aliases}\ {${lookup{$local_part}lsearch{CONFDIR/lowuid-aliases}\ {$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}\ {DEFAULT_SYSTEM_ACCOUNT_ALIAS}} ##################################################### ### end router/850_exim4-config_lowuid ##################################################### ##################################################### ### router/900_exim4-config_local_user ##################################################### ### router/900_exim4-config_local_user ################################# # This router matches local user mailboxes. If the router fails, the error # message is "Unknown user". local_user: debug_print = "R: local_user for $local_part@$domain" driver = accept domains = +local_domains check_local_user local_parts = ! root transport = LOCAL_DELIVERY cannot_route_message = Unknown user ##################################################### ### end router/900_exim4-config_local_user ##################################################### ##################################################### ### router/mmm_mail4root ##################################################### ### router/mmm_mail4root ################################# # deliver mail addressed to root to /var/mail/mail as user mail:mail # if it was not redirected in /etc/aliases or by other means # Exim cannot deliver as root since 4.24 (FIXED_NEVER_USERS) mail4root: debug_print = "R: mail4root for $local_part@$domain" driver = redirect domains = +local_domains data = /var/mail/mail file_transport = address_file local_parts = root user = mail group = mail ##################################################### ### end router/mmm_mail4root ##################################################### ##################################################### ### transport/00_exim4-config_header ##################################################### ###################################################################### # TRANSPORTS CONFIGURATION # ###################################################################### # ORDER DOES NOT MATTER # # Only one appropriate transport is called for each delivery. # ###################################################################### # A transport is used only when referenced from a router that successfully # handles an address. begin transports ##################################################### ### end transport/00_exim4-config_header ##################################################### ##################################################### ### transport/10_exim4-config_transport-macros ##################################################### ### transport/10_exim4-config_transport-macros ################################# .ifdef HIDE_MAILNAME REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1@DCreadhost frs : *@ETC_MAILNAME $1@DCreadhost frs REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}} .endif .ifdef REMOTE_SMTP_HELO_FROM_DNS .ifdef REMOTE_SMTP_HELO_DATA REMOTE_SMTP_HELO_DATA==${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}} .else REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}} .endif .endif ##################################################### ### end transport/10_exim4-config_transport-macros ##################################################### ##################################################### ### transport/30_exim4-config_address_file ##################################################### # This transport is used for handling deliveries directly to files that are # generated by aliasing or forwarding. # address_file: debug_print = "T: address_file for $local_part@$domain" driver = appendfile delivery_date_add envelope_to_add return_path_add ##################################################### ### end transport/30_exim4-config_address_file ##################################################### ##################################################### ### transport/30_exim4-config_address_pipe ##################################################### # This transport is used for handling pipe deliveries generated by # .forward files. If the commands fails and produces any output on standard # output or standard error streams, the output is returned to the sender # of the message as a delivery error. address_pipe: debug_print = "T: address_pipe for $local_part@$domain" driver = pipe return_fail_output ##################################################### ### end transport/30_exim4-config_address_pipe ##################################################### ##################################################### ### transport/30_exim4-config_address_reply ##################################################### # This transport is used for handling autoreplies generated by the filtering # option of the userforward router. # address_reply: debug_print = "T: autoreply for $local_part@$domain" driver = autoreply ##################################################### ### end transport/30_exim4-config_address_reply ##################################################### ##################################################### ### transport/30_exim4-config_mail_spool ##################################################### ### transport/30_exim4-config_mail_spool # This transport is used for local delivery to user mailboxes in traditional # BSD mailbox format. # mail_spool: debug_print = "T: appendfile for $local_part@$domain" driver = appendfile file = /var/mail/$local_part delivery_date_add envelope_to_add return_path_add group = mail mode = 0660 mode_fail_narrower = false ##################################################### ### end transport/30_exim4-config_mail_spool ##################################################### ##################################################### ### transport/30_exim4-config_maildir_home ##################################################### ### transport/30_exim4-config_maildir_home ################################# # Use this instead of mail_spool if you want to to deliver to Maildir in # home-directory - change the definition of LOCAL_DELIVERY # maildir_home: debug_print = "T: maildir_home for $local_part@$domain" driver = appendfile .ifdef MAILDIR_HOME_MAILDIR_LOCATION directory = MAILDIR_HOME_MAILDIR_LOCATION .else directory = $home/Maildir .endif .ifdef MAILDIR_HOME_CREATE_DIRECTORY create_directory .endif .ifdef MAILDIR_HOME_CREATE_FILE create_file = MAILDIR_HOME_CREATE_FILE .endif delivery_date_add envelope_to_add return_path_add maildir_format .ifdef MAILDIR_HOME_DIRECTORY_MODE directory_mode = MAILDIR_HOME_DIRECTORY_MODE .else directory_mode = 0700 .endif .ifdef MAILDIR_HOME_MODE mode = MAILDIR_HOME_MODE .else mode = 0600 .endif mode_fail_narrower = false # This transport always chdirs to $home before trying to deliver. If # $home is not accessible, this chdir fails and prevents delivery. # If you are in a setup where home directories might not be # accessible, uncomment the current_directory line below. # current_directory = / ##################################################### ### end transport/30_exim4-config_maildir_home ##################################################### ##################################################### ### transport/30_exim4-config_maildrop_pipe ##################################################### maildrop_pipe: debug_print = "T: maildrop_pipe for $local_part@$domain" driver = pipe path = "/bin:/usr/bin:/usr/local/bin" command = "/usr/bin/maildrop" message_prefix = message_suffix = return_path_add delivery_date_add envelope_to_add ##################################################### ### end transport/30_exim4-config_maildrop_pipe ##################################################### ##################################################### ### transport/30_exim4-config_procmail_pipe ##################################################### procmail_pipe: debug_print = "T: procmail_pipe for $local_part@$domain" driver = pipe path = "/bin:/usr/bin:/usr/local/bin" command = "/usr/bin/procmail" return_path_add delivery_date_add envelope_to_add ##################################################### ### end transport/30_exim4-config_procmail_pipe ##################################################### ##################################################### ### transport/30_exim4-config_remote_smtp ##################################################### ### transport/30_exim4-config_remote_smtp ################################# # This transport is used for delivering messages over SMTP connections. # Refuse to send any message with over-long lines, which could have # been received other than via SMTP. The use of message_size_limit to # enforce this is a red herring. remote_smtp: debug_print = "T: remote_smtp for $local_part@$domain" driver = smtp .ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}} .endif .ifdef REMOTE_SMTP_HOSTS_AVOID_TLS hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS .endif .ifdef REMOTE_SMTP_HEADERS_REWRITE headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE .endif .ifdef REMOTE_SMTP_RETURN_PATH return_path = REMOTE_SMTP_RETURN_PATH .endif .ifdef REMOTE_SMTP_HELO_DATA helo_data=REMOTE_SMTP_HELO_DATA .endif .ifdef DKIM_DOMAIN dkim_domain = DKIM_DOMAIN .endif .ifdef DKIM_SELECTOR dkim_selector = DKIM_SELECTOR .endif .ifdef DKIM_PRIVATE_KEY dkim_private_key = DKIM_PRIVATE_KEY .endif .ifdef DKIM_CANON dkim_canon = DKIM_CANON .endif .ifdef DKIM_STRICT dkim_strict = DKIM_STRICT .endif .ifdef DKIM_SIGN_HEADERS dkim_sign_headers = DKIM_SIGN_HEADERS .endif .ifdef TLS_DH_MIN_BITS tls_dh_min_bits = TLS_DH_MIN_BITS .endif .ifdef REMOTE_SMTP_TLS_CERTIFICATE tls_certificate = REMOTE_SMTP_TLS_CERTIFICATE .endif .ifdef REMOTE_SMTP_PRIVATEKEY tls_privatekey = REMOTE_SMTP_PRIVATEKEY .endif ##################################################### ### end transport/30_exim4-config_remote_smtp ##################################################### ##################################################### ### transport/30_exim4-config_remote_smtp_smarthost ##################################################### ### transport/30_exim4-config_remote_smtp_smarthost ################################# # This transport is used for delivering messages over SMTP connections # to a smarthost. The local host tries to authenticate. # This transport is used for smarthost and satellite configurations. # Refuse to send any messsage with over-long lines, which could have # been received other than via SMTP. The use of message_size_limit to # enforce this is a red herring. remote_smtp_smarthost: debug_print = "T: remote_smtp_smarthost for $local_part@$domain" driver = smtp .ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT message_size_limit = ${if > {$max_received_linelength}{998} {1}{0}} .endif hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \ {\ ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\ }\ {} \ } .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS .endif .ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS .endif .ifdef REMOTE_SMTP_HEADERS_REWRITE headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE .endif .ifdef REMOTE_SMTP_RETURN_PATH return_path = REMOTE_SMTP_RETURN_PATH .endif .ifdef REMOTE_SMTP_HELO_DATA helo_data=REMOTE_SMTP_HELO_DATA .endif .ifdef TLS_DH_MIN_BITS tls_dh_min_bits = TLS_DH_MIN_BITS .endif .ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE .endif .ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY .endif ##################################################### ### end transport/30_exim4-config_remote_smtp_smarthost ##################################################### ##################################################### ### transport/35_exim4-config_address_directory ##################################################### # This transport is used for handling file addresses generated by alias # or .forward files if the path ends in "/", which causes it to be treated # as a directory name rather than a file name. address_directory: debug_print = "T: address_directory for $local_part@$domain" driver = appendfile delivery_date_add envelope_to_add return_path_add check_string = "" escape_string = "" maildir_format ##################################################### ### end transport/35_exim4-config_address_directory ##################################################### ##################################################### ### retry/00_exim4-config_header ##################################################### ###################################################################### # RETRY CONFIGURATION # ###################################################################### begin retry ##################################################### ### end retry/00_exim4-config_header ##################################################### ##################################################### ### retry/30_exim4-config ##################################################### ### retry/30_exim4-config ################################# # This single retry rule applies to all domains and all errors. It specifies # retries every 15 minutes for 2 hours, then increasing retry intervals, # starting at 1 hour and increasing each time by a factor of 1.5, up to 16 # hours, then retries every 6 hours until 4 days have passed since the first # failed delivery. # Please note that these rules only limit the frequency of retries, the # effective retry-time depends on the frequency of queue-running, too. # See QUEUEINTERVAL in /etc/default/exim4. # Address or Domain Error Retries # ----------------- ----- ------- * * F,2h,15m; G,16h,1h,1.5; F,4d,6h ##################################################### ### end retry/30_exim4-config ##################################################### ##################################################### ### rewrite/00_exim4-config_header ##################################################### ###################################################################### # REWRITE CONFIGURATION # ###################################################################### begin rewrite ##################################################### ### end rewrite/00_exim4-config_header ##################################################### ##################################################### ### rewrite/31_exim4-config_rewriting ##################################################### ### rewrite/31_exim4-config_rewriting ################################# # This rewriting rule is particularly useful for dialup users who # don't have their own domain, but could be useful for anyone. # It looks up the real address of all local users in a file .ifndef NO_EAA_REWRITE_REWRITE *@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\ {$value}fail}" Ffrs # identical rewriting rule for /etc/mailname *@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\ {$value}fail}" Ffrs .endif ##################################################### ### end rewrite/31_exim4-config_rewriting ##################################################### ##################################################### ### auth/00_exim4-config_header ##################################################### ###################################################################### # AUTHENTICATION CONFIGURATION # ###################################################################### begin authenticators ##################################################### ### end auth/00_exim4-config_header ##################################################### ##################################################### ### auth/30_exim4-config_examples ##################################################### ### auth/30_exim4-config_examples ################################# # The examples below are for server side authentication, when the # local exim is SMTP server and clients authenticate to the local exim. # They allow two styles of plain-text authentication against an # CONFDIR/passwd file whose syntax is described in exim4_passwd(5). # Hosts that are allowed to use AUTH are defined by the # auth_advertise_hosts option in the main configuration. The default is # "*", which allows authentication to all hosts over all kinds of # connections if there is at least one authenticator defined here. # Authenticators which rely on unencrypted clear text passwords don't # advertise on unencrypted connections by default. Thus, it might be # wise to set up TLS to allow encrypted connections. If TLS cannot be # used for some reason, you can set AUTH_SERVER_ALLOW_NOTLS_PASSWORDS to # advertise unencrypted clear text password based authenticators on all # connections. As this is severely reducing security, using TLS is # preferred over allowing clear text password based authenticators on # unencrypted connections. # PLAIN authentication has no server prompts. The client sends its # credentials in one lump, containing an authorization ID (which we do not # use), an authentication ID, and a password. The latter two appear as # $auth2 and $auth3 in the configuration and should be checked against a # valid username and password. In a real configuration you would typically # use $auth2 as a lookup key, and compare $auth3 against the result of the # lookup, perhaps using the crypteq{}{} condition. # plain_server: # driver = plaintext # public_name = PLAIN # server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}" # server_set_id = $auth2 # server_prompts = : # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # LOGIN authentication has traditional prompts and responses. There is no # authorization ID in this mechanism, so unlike PLAIN the username and # password are $auth1 and $auth2. Apart from that you can use the same # server_condition setting for both authenticators. # login_server: # driver = plaintext # public_name = LOGIN # server_prompts = "Username:: : Password::" # server_condition = "${if crypteq{$auth2}{${extract{1}{:}{${lookup{$auth1}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}" # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # # cram_md5_server: # driver = cram_md5 # public_name = CRAM-MD5 # server_secret = ${extract{2}{:}{${lookup{$auth1}lsearch{CONFDIR/passwd}{$value}fail}}} # server_set_id = $auth1 # Here is an example of CRAM-MD5 authentication against PostgreSQL: # # psqldb_auth_server: # driver = cram_md5 # public_name = CRAM-MD5 # server_secret = ${lookup pgsql{SELECT pw FROM users WHERE username = '${quote_pgsql:$auth1}'}{$value}fail} # server_set_id = $auth1 # Authenticate against local passwords using sasl2-bin # Requires exim_uid to be a member of sasl group, see README.Debian.gz # plain_saslauthd_server: # driver = plaintext # public_name = PLAIN # server_condition = ${if saslauthd{{$auth2}{$auth3}}{1}{0}} # server_set_id = $auth2 # server_prompts = : # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # # login_saslauthd_server: # driver = plaintext # public_name = LOGIN # server_prompts = "Username:: : Password::" # # don't send system passwords over unencrypted connections # server_condition = ${if saslauthd{{$auth1}{$auth2}}{1}{0}} # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # # ntlm_sasl_server: # driver = cyrus_sasl # public_name = NTLM # server_realm = # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # # digest_md5_sasl_server: # driver = cyrus_sasl # public_name = DIGEST-MD5 # server_realm = # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # Authentcate against cyrus-sasl # This is mainly untested, please report any problems to # pkg-exim4-users@lists.alioth.debian.org. # cram_md5_sasl_server: # driver = cyrus_sasl # public_name = CRAM-MD5 # server_realm = # server_set_id = $auth1 # # plain_sasl_server: # driver = cyrus_sasl # public_name = PLAIN # server_realm = # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # # login_sasl_server: # driver = cyrus_sasl # public_name = LOGIN # server_realm = # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # Authenticate against courier authdaemon # This is now the (working!) example from # http://www.exim.org/eximwiki/FAQ/Policy_controls/Q0730 # Possible pitfall: access rights on /var/run/courier/authdaemon/socket. # plain_courier_authdaemon: # driver = plaintext # public_name = PLAIN # server_condition = \ # ${extract {ADDRESS} \ # {${readsocket{/var/run/courier/authdaemon/socket} \ # {AUTH ${strlen:exim\nlogin\n$auth2\n$auth3\n}\nexim\nlogin\n$auth2\n$auth3\n} }} \ # {yes} \ # fail} # server_set_id = $auth2 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # login_courier_authdaemon: # driver = plaintext # public_name = LOGIN # server_prompts = Username:: : Password:: # server_condition = \ # ${extract {ADDRESS} \ # {${readsocket{/var/run/courier/authdaemon/socket} \ # {AUTH ${strlen:exim\nlogin\n$auth1\n$auth2\n}\nexim\nlogin\n$auth1\n$auth2\n} }} \ # {yes} \ # fail} # server_set_id = $auth1 # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif # This one is a bad hack to support the broken version 4.xx of # Microsoft Outlook Express which violates the RFCs by demanding # "250-AUTH=" instead of "250-AUTH ". # If your list of offered authenticators is other than PLAIN and LOGIN, # you need to adapt the public_name line manually. # It has to be the last authenticator to work and has not been tested # well. Use at your own risk. # See the thread entry point from # http://www.exim.org/mail-archives/exim-users/Week-of-Mon-20050214/msg00213.html # for the related discussion on the exim-users mailing list. # Thanks to Fred Viles for this great work. # support_broken_outlook_express_4_server: # driver = plaintext # public_name = "\r\n250-AUTH=PLAIN LOGIN" # server_prompts = User Name : Password # server_condition = no # .ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS # server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}} # .endif ############## # See /usr/share/doc/exim4-base/README.Debian.gz ############## # These examples below are the equivalent for client side authentication. # They get the passwords from CONFDIR/passwd.client, whose format is # defined in exim4_passwd_client(5) # Because AUTH PLAIN and AUTH LOGIN send the password in clear, we # only allow these mechanisms over encrypted connections by default. # You can set AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS to allow unencrypted # clear text password authentication on all connections. cram_md5: driver = cram_md5 public_name = CRAM-MD5 client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}} client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}} # this returns the matching line from passwd.client and doubles all ^ PASSWDLINE=${sg{\ ${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}\ }\ {\\N[\\^]\\N}\ {^^}\ } plain: driver = plaintext public_name = PLAIN .ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS client_send = "<; ${if !eq{$tls_out_cipher}{}\ {^${extract{1}{:}{PASSWDLINE}}\ ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}\ }fail}" .else client_send = "<; ^${extract{1}{:}{PASSWDLINE}}\ ^${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}" .endif login: driver = plaintext public_name = LOGIN .ifndef AUTH_CLIENT_ALLOW_NOTLS_PASSWORDS # Return empty string if not non-TLS AND looking up $host in passwd-file # yields a non-empty string; fail otherwise. client_send = "<; ${if and{\ {!eq{$tls_out_cipher}{}}\ {!eq{PASSWDLINE}{}}\ }\ {}fail}\ ; ${extract{1}{::}{PASSWDLINE}}\ ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}" .else # Return empty string if looking up $host in passwd-file yields a # non-empty string; fail otherwise. client_send = "<; ${if !eq{PASSWDLINE}{}\ {}fail}\ ; ${extract{1}{::}{PASSWDLINE}}\ ; ${sg{PASSWDLINE}{\\N([^:]+:)(.*)\\N}{\\$2}}" .endif ##################################################### ### end auth/30_exim4-config_examples #####################################################