UBNT-AirMAX-MIB DEFINITIONS ::= BEGIN
    IMPORTS
        MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter64,
        IpAddress, TimeTicks FROM SNMPv2-SMI
        DisplayString, TruthValue, MacAddress FROM SNMPv2-TC
        OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF
        ubntAirosGroups, ubntMIB FROM UBNT-MIB;

    ubntAirMAX MODULE-IDENTITY
    LAST-UPDATED "201710030000Z"
    ORGANIZATION "Ubiquiti Networks, Inc."
    CONTACT-INFO "support@ubnt.com"
    DESCRIPTION  "The AirMAX MIB module for Ubiquiti Networks, Inc. entities"
    REVISION "201710030000Z"
    DESCRIPTION "ubntAirMAX revision"
    ::= { ubntMIB 4 }

    -- --------------------------------------------------------------------------------
    --                            radio table
    -- --------------------------------------------------------------------------------

    ubntRadioTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntRadioEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "Radio status & statistics"
        ::= { ubntAirMAX 1 }

    ubntRadioEntry OBJECT-TYPE
       SYNTAX     UbntRadioEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION "An entry in the ubntRadioTable"
       INDEX      { ubntRadioIndex }
       ::= { ubntRadioTable 1 }

    UbntRadioEntry ::= SEQUENCE {
        ubntRadioIndex      Integer32,
        ubntRadioMode       INTEGER,
        ubntRadioCCode      Integer32,
        ubntRadioFreq       Integer32,
        ubntRadioDfsEnabled TruthValue,
        ubntRadioTxPower    Integer32,
        ubntRadioDistance   Integer32,
        ubntRadioChainmask  Integer32,
        ubntRadioAntenna    DisplayString
    }

    ubntRadioIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..255)
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "Index for the ubntRadioTable"
        ::= { ubntRadioEntry 1 }

    ubntRadioMode OBJECT-TYPE
        SYNTAX     INTEGER {
		sta(1),
		ap(2),
		aprepeater(3),
		apwds(4)
	}
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Radio mode"
        ::= { ubntRadioEntry 2 }

    ubntRadioCCode OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Country code"
        ::= { ubntRadioEntry 3 }

    ubntRadioFreq OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Operating frequency"
        ::= { ubntRadioEntry 4 }

    ubntRadioDfsEnabled OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "DFS status"
        ::= { ubntRadioEntry 5 }

    ubntRadioTxPower OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Transmit power"
        ::= { ubntRadioEntry 6 }

    ubntRadioDistance OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Distance"
        ::= { ubntRadioEntry 7 }

    ubntRadioChainmask OBJECT-TYPE
        SYNTAX Integer32 (1..255)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Chainmask"
        ::= { ubntRadioEntry 8 }

    ubntRadioAntenna OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Antenna"
        ::= { ubntRadioEntry 9 }

    ubntRadioRssiTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntRadioRssiEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "Radio RSSI per chain"
        ::= { ubntAirMAX 2 }

    ubntRadioRssiEntry OBJECT-TYPE
       SYNTAX     UbntRadioRssiEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION "An entry in the ubntRadioRssiTable"
       INDEX      { ubntRadioIndex, ubntRadioRssiIndex }
       ::= { ubntRadioRssiTable 1 }

    UbntRadioRssiEntry ::= SEQUENCE {
        ubntRadioRssiIndex Integer32,
        ubntRadioRssi      Integer32,
        ubntRadioRssiMgmt  Integer32,
        ubntRadioRssiExt   Integer32
    }

    ubntRadioRssiIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..255)
        MAX-ACCESS not-accessible 
        STATUS     current
        DESCRIPTION "Index for the ubntRadioRssiTable"
        ::= { ubntRadioRssiEntry 1 }

    ubntRadioRssi OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Data frames rssi per chain"
        ::= { ubntRadioRssiEntry 2 }

    ubntRadioRssiMgmt OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Management frames rssi per chain"
        ::= { ubntRadioRssiEntry 3 }

    ubntRadioRssiExt OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Extension channel rssi per chain"
        ::= { ubntRadioRssiEntry 4 }

    -- --------------------------------------------------------------------------------
    --                            airMAX table
    -- --------------------------------------------------------------------------------

    ubntAirMaxTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntAirMaxEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "airMAX protocol statistics"
        ::= { ubntAirMAX 6 }

    ubntAirMaxEntry OBJECT-TYPE
       SYNTAX     UbntAirMaxEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION "An entry in the ubntAirMaxTable"
       INDEX      { ubntAirMaxIfIndex }
       ::= { ubntAirMaxTable 1 }

    UbntAirMaxEntry ::= SEQUENCE {
        ubntAirMaxIfIndex     Integer32,
        ubntAirMaxEnabled     TruthValue,
        ubntAirMaxQuality     Integer32,
        ubntAirMaxCapacity    Integer32,
        ubntAirMaxPriority    INTEGER,
        ubntAirMaxNoAck       TruthValue,
        ubntAirMaxAirtime     Integer32,
        ubntAirMaxGpsSync     TruthValue,
        ubntAirMaxTdd         TruthValue
    }

    ubntAirMaxIfIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..255)
        MAX-ACCESS not-accessible 
        STATUS     current
        DESCRIPTION "Index for the ubntAirMaxTable"
        ::= { ubntAirMaxEntry 1 }

    ubntAirMaxEnabled OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX status - on/off"
        ::= { ubntAirMaxEntry 2 }

    ubntAirMaxQuality OBJECT-TYPE
        SYNTAX Integer32 (0..100)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX quality - percentage"
        ::= { ubntAirMaxEntry 3 }

    ubntAirMaxCapacity OBJECT-TYPE
        SYNTAX Integer32 (0..100)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX capacity - percentage"
        ::= { ubntAirMaxEntry 4 }

    ubntAirMaxPriority OBJECT-TYPE
        SYNTAX INTEGER {
        high(0),
        medium(1),
        low(2),
        none(3)
    }
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX priority - none/high/low/medium"
        ::= { ubntAirMaxEntry 5 }

    ubntAirMaxNoAck OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX NoACK mode - on/off"
        ::= { ubntAirMaxEntry 6 }

    ubntAirMaxAirtime OBJECT-TYPE
        SYNTAX Integer32
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX Airtime in % multiplied by 10"
        ::= { ubntAirMaxEntry 7 }

    ubntAirMaxGpsSync OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX GPS sync - on/off"
        ::= { ubntAirMaxEntry 8 }

    ubntAirMaxTdd OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airMAX TDD framing - on/off"
        ::= { ubntAirMaxEntry 9 }

    -- --------------------------------------------------------------------------------
    --                            airSync table
    -- --------------------------------------------------------------------------------

    ubntAirSyncTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntAirSyncEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "airSync protocol statistics"
        ::= { ubntAirMAX 3 }

    ubntAirSyncEntry OBJECT-TYPE
       SYNTAX     UbntAirSyncEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION "An entry in the ubntAirSyncTable"
       INDEX      { ubntAirSyncIfIndex }
       ::= { ubntAirSyncTable 1 }

    UbntAirSyncEntry ::= SEQUENCE {
        ubntAirSyncIfIndex    Integer32,
        ubntAirSyncMode       INTEGER,
        ubntAirSyncCount      Integer32,
        ubntAirSyncDownUtil   Integer32,
        ubntAirSyncUpUtil     Integer32
    }

    ubntAirSyncIfIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..255)
        MAX-ACCESS not-accessible 
        STATUS     current
        DESCRIPTION "Index for the ubntAirSyncTable"
        ::= { ubntAirSyncEntry 1 }

    ubntAirSyncMode OBJECT-TYPE
        SYNTAX     INTEGER {
        disabled(0),
        master(1),
        slave(2)
    }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airSync mode - master/slave"
        ::= { ubntAirSyncEntry 2 }

    ubntAirSyncCount OBJECT-TYPE
        SYNTAX     Integer32 (0..255)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airSync client count"
        ::= { ubntAirSyncEntry 3 }

    ubntAirSyncDownUtil OBJECT-TYPE
        SYNTAX     Integer32 (0..100)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airSync down utilization"
        ::= { ubntAirSyncEntry 4 }

    ubntAirSyncUpUtil OBJECT-TYPE
        SYNTAX     Integer32 (0..100)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airSync up utilization"
        ::= { ubntAirSyncEntry 5 }

    -- --------------------------------------------------------------------------------
    --                            airSelect table
    -- --------------------------------------------------------------------------------

    ubntAirSelTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntAirSelEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "airSelect protocol statistics"
        ::= { ubntAirMAX 4 }

    ubntAirSelEntry OBJECT-TYPE
       SYNTAX     UbntAirSelEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION "An entry in the ubntAirSelTable"
       INDEX      { ubntAirSelIfIndex }
       ::= { ubntAirSelTable 1 }

    UbntAirSelEntry ::= SEQUENCE {
        ubntAirSelIfIndex    Integer32,
        ubntAirSelEnabled    TruthValue,
        ubntAirSelInterval   Integer32
    }

    ubntAirSelIfIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..255)
        MAX-ACCESS not-accessible 
        STATUS     current
        DESCRIPTION "Index for the ubntAirSelTable"
        ::= { ubntAirSelEntry 1 }

    ubntAirSelEnabled OBJECT-TYPE
        SYNTAX TruthValue
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "airSelect status - on/off"
        ::= { ubntAirSelEntry 2 }

    ubntAirSelInterval OBJECT-TYPE
        SYNTAX     Integer32 (0..65535)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airSelect hop interval (miliseconds)"
        ::= { ubntAirSelEntry 3 }

    -- --------------------------------------------------------------------------------
    --                            wireless statistics table
    -- --------------------------------------------------------------------------------

    ubntWlStatTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntWlStatEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "Wireless statistics"
        ::= { ubntAirMAX 5 }

    ubntWlStatEntry OBJECT-TYPE
       SYNTAX     UbntWlStatEntry
       MAX-ACCESS not-accessible
       STATUS     current
       DESCRIPTION "An entry in the ubntWlStatTable"
       INDEX      { ubntWlStatIndex }
       ::= { ubntWlStatTable 1 }

    UbntWlStatEntry ::= SEQUENCE {
        ubntWlStatIndex      Integer32,
        ubntWlStatSsid       DisplayString,
        ubntWlStatHideSsid   TruthValue,
        ubntWlStatApMac      MacAddress,
        ubntWlStatSignal     Integer32,
        ubntWlStatRssi       Integer32,
        ubntWlStatCcq        Integer32,
        ubntWlStatNoiseFloor Integer32,
        ubntWlStatTxRate     Integer32,
        ubntWlStatRxRate     Integer32,
        ubntWlStatSecurity   DisplayString,
        ubntWlStatWdsEnabled TruthValue,
        ubntWlStatApRepeater TruthValue,
        ubntWlStatChanWidth  Integer32,
        ubntWlStatStaCount   Gauge32
    }

    ubntWlStatIndex OBJECT-TYPE
        SYNTAX     Integer32 (1..255)
        MAX-ACCESS not-accessible 
        STATUS     current
        DESCRIPTION "Index for the ubntWlStatTable"
        ::= { ubntWlStatEntry 1 }

    ubntWlStatSsid OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "SSID"
        ::= { ubntWlStatEntry 2 }

    ubntWlStatHideSsid OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Hide SSID - on/off"
        ::= { ubntWlStatEntry 3 }

    ubntWlStatApMac OBJECT-TYPE
        SYNTAX     MacAddress
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "AP MAC address"
        ::= { ubntWlStatEntry 4 }

    ubntWlStatSignal OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Signal strength, dBm"
        ::= { ubntWlStatEntry 5 }

    ubntWlStatRssi OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "RSSI, dBm"
        ::= { ubntWlStatEntry 6 }

    ubntWlStatCcq OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "CCQ in %"
        ::= { ubntWlStatEntry 7 }

    ubntWlStatNoiseFloor OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Noise floor"
        ::= { ubntWlStatEntry 8 }

    ubntWlStatTxRate OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "TX rate"
        ::= { ubntWlStatEntry 9 }

    ubntWlStatRxRate OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "RX rate"
        ::= { ubntWlStatEntry 10 }

    ubntWlStatSecurity OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Wireless security mode"
        ::= { ubntWlStatEntry 11 }

    ubntWlStatWdsEnabled OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "WDS - on/off"
        ::= { ubntWlStatEntry 12 }

    ubntWlStatApRepeater OBJECT-TYPE
        SYNTAX     TruthValue
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "AP repeater - on/off"
        ::= { ubntWlStatEntry 13 }

    ubntWlStatChanWidth OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Channel Width"
        ::= { ubntWlStatEntry 14 }

    ubntWlStatStaCount OBJECT-TYPE
        SYNTAX     Gauge32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Station count"
        ::= { ubntWlStatEntry 15 }

    -- --------------------------------------------------------------------------------
    --                            station list table
    -- --------------------------------------------------------------------------------

    ubntStaTable OBJECT-TYPE
        SYNTAX     SEQUENCE OF UbntStaEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "Station list"
        ::= { ubntAirMAX 7 }

    ubntStaEntry OBJECT-TYPE
        SYNTAX     UbntStaEntry
        MAX-ACCESS not-accessible
        STATUS     current
        DESCRIPTION "An entry in the ubntStaEntry"
        INDEX      { ubntWlStatIndex, ubntStaMac }
        ::= { ubntStaTable 1 }

    UbntStaEntry ::= SEQUENCE {
        ubntStaMac        MacAddress,
        ubntStaName       DisplayString,
        ubntStaSignal     Integer32,
        ubntStaNoiseFloor Integer32,
        ubntStaDistance   Integer32,
        ubntStaCcq        Integer32,
        ubntStaAmp        Integer32,
        ubntStaAmq        Integer32,
        ubntStaAmc        Integer32,
        ubntStaLastIp     IpAddress,
        ubntStaTxRate     Integer32,
        ubntStaRxRate     Integer32,
        ubntStaTxBytes    Counter64,
        ubntStaRxBytes    Counter64,
        ubntStaConnTime   TimeTicks,
        ubntStaLocalCINR  Integer32,
        ubntStaTxCapacity Integer32,
        ubntStaRxCapacity Integer32,
        ubntStaTxAirtime  Integer32,
        ubntStaRxAirtime  Integer32,
        ubntStaTxLatency  Integer32
    }

    ubntStaMac OBJECT-TYPE
        SYNTAX     MacAddress
        MAX-ACCESS not-accessible 
        STATUS     current
        DESCRIPTION "Station MAC address"
        ::= { ubntStaEntry 1 }

    ubntStaName OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Station name"
        ::= { ubntStaEntry 2 }

    ubntStaSignal OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Signal strength, dBm"
        ::= { ubntStaEntry 3 }

    ubntStaNoiseFloor OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Noise floor"
        ::= { ubntStaEntry 4 }

    ubntStaDistance OBJECT-TYPE
        SYNTAX Integer32 (1..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Distance"
        ::= { ubntStaEntry 5 }

    ubntStaCcq OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "CCQ in %"
        ::= { ubntStaEntry 6 }


    ubntStaAmp OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airMAX priority"
        ::= { ubntStaEntry 7 }

    ubntStaAmq OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airMAX quality"
        ::= { ubntStaEntry 8 }

    ubntStaAmc OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "airMAX capacity"
        ::= { ubntStaEntry 9 }

    ubntStaLastIp OBJECT-TYPE
        SYNTAX     IpAddress
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Last known IP address"
        ::= { ubntStaEntry 10 }

    ubntStaTxRate OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "TX rate"
        ::= { ubntStaEntry 11 }

    ubntStaRxRate OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "RX rate"
        ::= { ubntStaEntry 12 }

    ubntStaTxBytes OBJECT-TYPE
        SYNTAX     Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "TX bytes"
        ::= { ubntStaEntry 13 }

    ubntStaRxBytes OBJECT-TYPE
        SYNTAX     Counter64
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "TX rate"
        ::= { ubntStaEntry 14 }

    ubntStaConnTime OBJECT-TYPE
        SYNTAX     TimeTicks
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Connection Time in seconds"
        ::= { ubntStaEntry 15 }

    ubntStaLocalCINR OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Local CINR"
        ::= { ubntStaEntry 16 }

    ubntStaTxCapacity OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Uplink Capacity in Kbps"
        ::= { ubntStaEntry 17 }

    ubntStaRxCapacity OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Downlink Capacity in Kbps"
        ::= { ubntStaEntry 18 }

    ubntStaTxAirtime OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Uplink Airtime in % multiplied by 10"
        ::= { ubntStaEntry 19 }

    ubntStaRxAirtime OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Downlink Airtime in % multiplied by 10"
        ::= { ubntStaEntry 20 }

    ubntStaTxLatency OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Uplink Latency in milliseconds"
        ::= { ubntStaEntry 21 }

    -- --------------------------------------------------------------------------------
    --                            host stats table
    -- --------------------------------------------------------------------------------

    ubntHostInfo OBJECT IDENTIFIER ::= { ubntAirMAX 8 }

    ubntHostLocaltime OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Host local time"
        ::= { ubntHostInfo 1 }

    ubntHostNetrole OBJECT-TYPE
        SYNTAX     INTEGER {
        unknown(0),
        bridge(1),
        router(2),
        soho(3)
    }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Radio mode"
        ::= { ubntHostInfo 2 }

    ubntHostCpuLoad OBJECT-TYPE
        SYNTAX Integer32 (0..65535)
        MAX-ACCESS read-only
        STATUS current
        DESCRIPTION "Host CPU load"
        ::= { ubntHostInfo 3 }

    ubntHostTemperature OBJECT-TYPE
        SYNTAX     Integer32 (0..255)
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "Host system temperature"
        ::= { ubntHostInfo 4 }

    -- --------------------------------------------------------------------------------
    --                            gps stats table
    -- --------------------------------------------------------------------------------

    ubntGpsInfo OBJECT IDENTIFIER ::= { ubntAirMAX 9 }

    ubntGpsStatus OBJECT-TYPE
        SYNTAX     INTEGER {
        absent(0),
        off(1),
        on(2)
    }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS status"
        ::= { ubntGpsInfo 1 }

    ubntGpsFix OBJECT-TYPE
        SYNTAX     INTEGER {
        unknown(0),
        nofix(1),
        fix2d(2),
        fix3d(3)
    }
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Fix Obtained"
        ::= { ubntGpsInfo 2 }

    ubntGpsLat OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Latitude"
        ::= { ubntGpsInfo 3 }

    ubntGpsLon OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Longitude"
        ::= { ubntGpsInfo 4 }

    ubntGpsAltMeters OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Altitude (m)"
        ::= { ubntGpsInfo 5 }

    ubntGpsAltFeet OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Altitude (ft)"
        ::= { ubntGpsInfo 6 }

    ubntGpsSatsVisible OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Satellites Visible"
        ::= { ubntGpsInfo 7 }

    ubntGpsSatsTracked OBJECT-TYPE
        SYNTAX     Integer32
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Satellites Tracked"
        ::= { ubntGpsInfo 8 }

    ubntGpsHDOP OBJECT-TYPE
        SYNTAX     DisplayString
        MAX-ACCESS read-only
        STATUS     current
        DESCRIPTION "GPS Horizontal Dilution of Precision"
        ::= { ubntGpsInfo 9 }


    ubntAirMAXStatusGroup OBJECT-GROUP OBJECTS {
        ubntStaName,
        ubntStaSignal,
        ubntStaNoiseFloor,
        ubntStaDistance,
        ubntStaCcq,
        ubntStaAmp,
        ubntStaAmq,
        ubntStaAmc,
        ubntStaLastIp,
        ubntStaTxRate,
        ubntStaRxRate,
        ubntStaTxBytes,
        ubntStaRxBytes,
        ubntStaConnTime,
        ubntStaLocalCINR,
        ubntStaTxCapacity,
        ubntStaRxCapacity,
        ubntStaTxAirtime,
        ubntStaRxAirtime,
        ubntStaTxLatency,
        ubntRadioMode,
        ubntRadioCCode,
        ubntRadioFreq,
        ubntRadioDfsEnabled,
        ubntRadioTxPower,
        ubntRadioDistance,
        ubntRadioChainmask,
        ubntRadioAntenna,
        ubntRadioRssi,
        ubntRadioRssiMgmt,
        ubntRadioRssiExt,
        ubntAirMaxEnabled,
        ubntAirMaxQuality,
        ubntAirMaxCapacity,
        ubntAirMaxPriority,
        ubntAirMaxNoAck,
        ubntAirMaxAirtime,
        ubntAirMaxGpsSync,
        ubntAirMaxTdd,
        ubntAirSyncMode,
        ubntAirSyncCount,
        ubntAirSyncDownUtil,
        ubntAirSyncUpUtil,
        ubntAirSelEnabled,
        ubntAirSelInterval,
        ubntWlStatSsid,
        ubntWlStatHideSsid,
        ubntWlStatApMac,
        ubntWlStatSignal,
        ubntWlStatRssi,
        ubntWlStatCcq,
        ubntWlStatNoiseFloor,
        ubntWlStatTxRate,
        ubntWlStatRxRate,
        ubntWlStatSecurity,
        ubntWlStatWdsEnabled,
        ubntWlStatApRepeater,
        ubntWlStatChanWidth,
        ubntWlStatStaCount,
        ubntHostLocaltime,
        ubntHostNetrole,
        ubntHostCpuLoad,
        ubntHostTemperature,
        ubntGpsStatus,
        ubntGpsFix,
        ubntGpsLat,
        ubntGpsLon,
        ubntGpsAltMeters,
        ubntGpsAltFeet,
        ubntGpsSatsVisible,
        ubntGpsSatsTracked,
        ubntGpsHDOP}
        STATUS current
        DESCRIPTION "Status and statistics for AirMax monitoring"
        ::= { ubntAirosGroups 1 }

    ubntAirMAXStatusCompliance MODULE-COMPLIANCE
        STATUS current
        DESCRIPTION "The compliance statement for Ubiquiti AirMax entities."
        MODULE
            GROUP ubntAirMAXStatusGroup
            DESCRIPTION "This group is for Ubiquiti systems."
        ::= { ubntAirosGroups 2 }

END